This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Zhu B, Nematollahi B, Pan J, Zhang Y, Zhou Z & Zhang Y: “3D concrete printing of permanent formwork for concrete column construction”. Cement & Concrete Composites, Vol. 121, 2021, 15 pp.Search in Google Scholar
Chen Y, Zhang W, Zhang Y, Yu Z, Liu C, Wang D, Liu Z, Liu G, Pang B & Yang L: “3D Printed concrete with coarse aggregates: Built–in–Stirrup permanent concrete formwork for reinforced columns”. Journal of Building Engineering, V. 70, 2023, 20 pp.Search in Google Scholar
Raza Z, Triantafyllidis Z, Anton A., Dillenburger B & Shahverdi M: “Seismic performance of Fe-SMA prestressed segmental bridge columns with 3D printed permanent concrete formwork”. Engineering Structures, V. 302, March 2024, 17 pp.Search in Google Scholar
Silfwerbrand J: “Bropelare av SKB med kvarsittande 3D-utskriven betongform – en pilotstudie”. (”Bridge Columns of SCC with Permanent 3DPC formwork – A Pilot Study”). Report, Division of Concrete Structures, Dept. of Civil & Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2022, 35 pp. (In Swedish).Search in Google Scholar
Silfwerbrand J: “Composite Concrete Columns with 3DP Concrete Forms”. Proceedings, fib Symposium, June 2022 in Oslo. 10 pp.Search in Google Scholar
Silfwerbrand J: “Samverkanspelare av 3D-utskriven och självkompakterande betong - Laboratorieförsök”. (“Composite column of 3D printed concrete and self-consolidating concrete – Laboratory tests”). Report, Div. of Concrete Structures, Dept. of Civil & Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2024, 67 pp. (In Swedish).Search in Google Scholar
Silfwerbrand J: “Composite concrete columns of 3DP concrete and self-compacting concrete subjected to normal force”. Proceedings, Digital Concrete 2024, Munich, Sept. 4-6, 2024, 8 pp.Search in Google Scholar
Swedish Concrete Association: “Självkompakterande betong – rekommendationer för användning”. (”Self-Compacting Concrete – Recommendations for Use”). Concrete Report No. 10, 2nd Edition. Stockholm, Sweden, 2020, 143 pp. (In Swedish).Search in Google Scholar
Billberg P: “Form Pressure Generated by Self-Compacting Concrete – Influence of Thixotropy and Structural Behaviour at Rest”. PhD Thesis, Div. of Concrete Structures, Dept. of Civil & Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2006.Search in Google Scholar
Billberg P, Roussel N, Amziane S, Beitzel M, Charitou G, Freund B, Gardner J N, Grampeix G, Graubner C-A, Keller L, Khayat K H, Lange D A, Omran A F, Perrot A, Proske T, Robert Quattrociocchi R & Vanhove Y: “Field Validation of Models for Predicting Lateral Form Pressure Exerted by SCC”. Cement & Concrete Composites, 2014, Vol. 54, pp. 70-79.Search in Google Scholar
Gardner, N.J., Keller, L., Quattrociocchi, R, & Charitou, G., “Field Investigation of Formwork Pressures using Self-Consolidating Concrete”. Concrete International, Vol. 34, No. 1, January 2012, pp. 41-47.Search in Google Scholar
Mc Carthy R & Silfwerbrand J: “The Influence of SCC Properties on Formwork Pressure – A Field Study”. Nordic Concrete Research, Publication No. 49, Issue No. 1, 2014, pp. 73-91.Search in Google Scholar
Gardner, N.J., “Pressures of Self-Consolidating Concrete on Formwork”. Concrete International, Vol. 36, No. 7, July 2014, pp. 53-58.Search in Google Scholar
Vema Venturi AB: “PREMO Concrete Pressure Monitoring. Data acquisition system. Installation and operating instructions”, Version 1.2. Brochure, Göteborg, Sweden, 2023. 24 pp.Search in Google Scholar
Shabo I & Hossein J: “Försök med samverkande bropelare av 3D-utskriven betong och SKB”. (“Tests with Composite Bridge Columns of 3D Printed Concrete and SCC”). BSc Thesis, Div. of Concrete Structures, Dept. of Civil & Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2022, 67 pp. (In Swedish).Search in Google Scholar
