This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Le T, Austin A, Lim S, Buswell R, Law R, Gibb A & Thorpe T: “Hardened Properties of High-Performance Printing Concrete”. Cement and Concrete Research, Vol. 42, no. 3, 2012, pp. 558–66.Search in Google Scholar
Buswell R, Leal de Silva W, Jones S, Dirrenberger J: “3D printing using concrete extrusion: A roadmap for research”. Cement and Concrete Research, Vol. 112, 2018, pp 37-49.Search in Google Scholar
Wolfs R, Bos F & Salet T: “Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion”. Cement and Concrete Research, Vol. 119, 2019, pp. 132-140.Search in Google Scholar
Paul S, Tay Y, Panda B, Tan M J: “Fresh and hardened properties of 3D printable cementitious materials for building and construction”. Archives of Civil and Mechanical Engineering, Vol. 18, Issue 1, 2018, pp 311-319.Search in Google Scholar
Gaudillière N, Duballet R, Bouyssou C, Mallet A, Roux P, Zakeri M & Dirrenberger J: “Large-Scale Additive Manufacturing of Ultra-High Performance Concrete of Integrated Formwork for Truss-Shaped Pillars”. Proceedings, Robotic Fabrication in Architecture, Art and Design 2018, ETH Zurich, Zurich, Switzerland, September 2018, pp. 459–472.Search in Google Scholar
Gosselin C, Duballet R, Roux P, Gaudillière N, Dirrenberger J, Morel P: “Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders”. Materials & Design, Vol. 100, 2016, pp. 102-109.Search in Google Scholar
Ooms T, Vantyghem G, Tao Y, Bekaert M, Schutter G D, Tittelboom K V & Corte W D:. “The Production of a Topology-Optimized 3D-Printed Concrete Bridge”. Proceedings, Third RILEM International Conference on Concrete and Digital Fabrication, Loughborough University, Loughborough, United Kingdom, June 2022, pp. 37–42.Search in Google Scholar
Westerlind H: “Choreographing Flow: A Study in Concrete Deposition”. (PhD Thesis), KTH Royal Institute of Technology, School of Architecture, Stockholm, Sweden, 2021.Search in Google Scholar
Anton A, Bedarf P, Yoo A, Dillenburger B, Reiter L, Wangler T & Flatt R.J: “Concrete Choreography: Prefabrication of 3D-Printed Columns”. Proceedings, Fabricate 2020, The University College London, London, United Kingdom, September 2020, pp 286–93.Search in Google Scholar
Breseghello L & Naboni R: “Toolpath-based design for 3D concrete printing of carbon-efficient architectural structures”. Additive Manufacturing, Vol. 56, 2022.Search in Google Scholar
Westerlind H & Hernández J: “Knitting Concrete”. Proceedings, Second RILEM International Conference on Concrete and Digital Fabrication, Eindhoven University of Technology, Eindhoven, Netherlands, July 2020, pp.988–97.Search in Google Scholar
Mechtcherine V, Tittelboom K, Kazemian A, Kreiger E, Nematollahi B, Nerella V, Santhanam M, Schutter G, Van Zijl G, Lowke D, Ivaniuk E, Taubert M, & Bos F: “A roadmap for quality control of hardening and hardened printed concrete”. Cement and Concrete Research, Vol. 157, 2022.Search in Google Scholar
Swedish Standards Institute: “Testing hardened concrete,” Part 3, “Compressive strength of test specimens” (SS-EN 12390-3:2019), pp. 32.Search in Google Scholar
Roussel, N: “Rheological requirements for printable concretes”. Cement and Concrete Research, Vol 112, 2018; pp. 76–85.Search in Google Scholar
“Sikacrete®-751 3D.” [Online]. Available: https://deu.sika.com/de/construction/betonherstellung/fertigteile-undbetonwaren/3dbetondruck/sikacrete-751-3d.htmlSearch in Google Scholar