[
1. Silfwerbrand, J, “Concrete and Sustainability – Some Thoughts from a Swedish Horizon”, Nordic Concrete Research, Vol. 63, Dec. 2020, pp. 79–87.10.2478/ncr-2020-0019
]Search in Google Scholar
[
2. Wangler, T, Roussel, N, Bos, F. P, Salet, T. A. M, and Flatt, R. J, “Digital Concrete: A Review”, Cement and Concrete Research, Vol. 123, Sept. 2019, Article 105780.10.1016/j.cemconres.2019.105780
]Search in Google Scholar
[
3. Boggarapu, V, Gujjala, R, Ojha, S, Acharya, S, Venkateswara babu, P, Chowdary, S, and kumar Gara, D, “State of the art in functionally graded materials”, Composite Structures, Vol. 262, Apr. 2021, Article 113596.10.1016/j.compstruct.2021.113596
]Search in Google Scholar
[
4. Westerlind, H, “Choreographing Flow: A Study in Concrete Deposition”. PhD thesis, KTH Royal Institute of Technology, Dept. of Architecture, 2021.10.2307/j.ctv13xprf6.39
]Search in Google Scholar
[
5. Torelli, G, Fernández, M. G, and Lees, J. M, “Functionally graded concrete: Design objectives, production techniques and analysis methods for layered and continuously graded elements”, Construction and Building Materials, Vol. 242, May 2020, Article 118040.10.1016/j.conbuildmat.2020.118040
]Search in Google Scholar
[
6. Zhang, C, Chen, F, Huang, Z, Jia, M, Chen, G, Ye, Y, Lin, Y, Liu, W, Chen, B, Shen, Q, Zhang, L, and Lavernia, E. J, “Additive manufacturing of functionally graded materials: A review”, Materials Science and Engineering, Vol. 764, Sept. 2019, Article 138209.10.1016/j.msea.2019.138209
]Search in Google Scholar
[
7. Bever, M. B and Duwez, P. E, “Gradients in composite materials”, Materials Science and Engineering, Vol. 10, Jan. 1972, pp. 1-8.10.1016/0025-5416(72)90059-6
]Search in Google Scholar
[
8. Li, S, Xin, Y, Yu, Y, and Wang, Y, “Design for additive manufacturing from a force-flow perspective”, Materials & Design, Vol. 204, June 2021, Article 109664.10.1016/j.matdes.2021.109664
]Search in Google Scholar
[
9. Nogata, F and Takahashi, H, “Intelligent functionally graded material: Bamboo”, Composites Engineering, Vol. 5, Jan. 1995, pp. 743–751.10.1016/0961-9526(95)00037-N
]Search in Google Scholar
[
10. Kawasaki, A and Watanabe, R, “Concept and P/M fabrication of functionally gradient materials”, Ceramics International, Vol. 23, Jan. 1997, pp. 73–83.10.1016/0272-8842(95)00143-3
]Search in Google Scholar
[
11. Naebe, M and Shirvanimoghaddam, K, “Functionally graded materials: A review of fabrication and properties”, Applied Materials Today, Vol. 5, Dec. 2016, pp. 223–245.10.1016/j.apmt.2016.10.001
]Search in Google Scholar
[
12. Kieback, B, Neubrand, A, and Riedel, H, “Processing techniques for functionally graded materials”, Materials Science and Engineering: A, Vol. 362, Dec. 2003, pp. 81–106.10.1016/S0921-5093(03)00578-1
]Search in Google Scholar
[
13. El-Galy, I. M, Saleh, B. I, and Ahmed, M. H, “Functionally graded materials classifications and development trends from industrial point of view”, SN Applied Sciences, Vol. 1, Oct. 2019, p. 1378.10.1007/s42452-019-1413-4
]Search in Google Scholar
[
14. Mahmoud, D and Elbestawi, M. A, “Lattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review”, Journal of Manufacturing and Materials Processing, Vol. 1, Dec. 2017, p. 13.10.3390/jmmp1020013
]Search in Google Scholar
[
15. “Standard - Additive manufacturing – General principles – Terminology ISO/ASTM 52900:2015.”
]Search in Google Scholar
[
16. Hilmas, G. E, Lombardi, J. L, and Hoffman, R. A, “Advances in the Fabrication of Functionally Graded Materials Using Extrusion Freeform Fabrication”, Functionally Graded Materials 1996 (Shiota, I and Miyamoto, Y, eds.), Amsterdam: Elsevier Science B.V., Jan. 1997, pp. 319–324.10.1016/B978-044482548-3/50053-6
]Search in Google Scholar
[
17. Loh, G. H, Pei, E, Harrison, D, and Monzón, M. D, “An overview of functionally graded additive manufacturing”, Additive Manufacturing, Vol. 23, pp. 34–44, Oct. 2018.10.1016/j.addma.2018.06.023
]Search in Google Scholar
[
18. Oxman, N, “Methods and Apparatus for Variable Property Rapid Prototyping”, Apr. 2011.10.1080/17452759.2011.558588
]Search in Google Scholar
[
19. Vaezi, M, Chianrabutra, S, Mellor, B, and Yang, S, “Multiple material additive manufacturing – Part 1: A review”, Virtual and Physical Prototyping, Vol. 8, Mar. 2013, pp. 19–50.10.1080/17452759.2013.778175
]Search in Google Scholar
[
20. Ngo, T. D, Kashani, A, Imbalzano, G, Nguyen, K. T. Q, and Hui, D, “Additive manufacturing (3D printing): A review of materials, methods, applications, and challenges”, Composites Part B: Engineering, Vol. 143, June 2018, pp. 172–196.10.1016/j.compositesb.2018.02.012
]Search in Google Scholar
[
21. Mahamood, R. M and Akinlabi, E. T, “Types of Functionally Graded Materials and Their Areas of Application”, Functionally Graded Materials (Mahamood, R. M and Akinlabi, E. T, eds.), Topics in Mining, Metallurgy and Materials Engineering, Cham: Springer International Publishing, 2017, pp. 9–21.10.1007/978-3-319-53756-6_2
]Search in Google Scholar
[
22. Popovich, V. A, Borisov, E. V, Popovich, A. A, Sufiiarov, V. S, Masaylo,D. V, and Alzina, L, “Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties”, Materials & Design, Vol. 114, Jan. 2017, pp. 441–449.10.1016/j.matdes.2016.10.075
]Search in Google Scholar
[
23. Mirzaali, M. J, Caracciolo, A, Pahlavani, H, Janbaz, S, Vergani, L, and Zadpoor, A. A, “Multi-material 3D printed mechanical metamaterials: Rational design of elastic properties through spatial distribution of hard and soft phases”, Applied Physics Letters, Vol. 113, Dec. 2018, Article 241903.10.1063/1.5064864
]Search in Google Scholar
[
24. Liu, T, Guessasma, S, Zhu, J, Zhang, W, and Belhabib, S, “Functionally graded materials from topology optimisation and stereolithography”, European Polymer Journal, Vol. 108, Nov. 2018, pp. 199–211.10.1016/j.eurpolymj.2018.08.038
]Search in Google Scholar
[
25. Kuipers, T, Wu, J, and Wang, C. C. L, “CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion”, Computer-Aided Design, Vol. 114, pp. 37–50, Sept. 2019.10.1016/j.cad.2019.05.003
]Search in Google Scholar
[
26. Greer, J. R and Deshpande, V. S, “Three-dimensional architected materials and structures: Design, fabrication, and mechanical behavior”, MRS Bulletin, Vol. 44, Oct. 2019, pp. 750–757.10.1557/mrs.2019.232
]Search in Google Scholar
[
27. Dirrenberger, J, Towards an Integrated Approach for the Development of Architectured Materials. Thesis, Sorbonne Université, Dec. 2018.
]Search in Google Scholar
[
28. Martínez, J, Dumas, J, and Lefebvre, S, “Procedural Voronoi Foams for Additive Manufacturing”, ACM Transactions on Graphics, Vol. 35, 2016, pp. 1–14.10.1145/2897824.2925922
]Search in Google Scholar
[
29. Schumacher, C, Bickel, B, Rys, J, Marschner, S, Daraio, C, and Gross, M, “Microstructures to control elasticity in 3D printing”, ACM Transactions on Graphics, Vol. 34, July 2015, pp. 136:1–136:13.10.1145/2766926
]Search in Google Scholar
[
30. Van Der Putten, J, Deprez, M, Cnudde, V, De Schutter, G, and Van Tittelboom, K, “Microstructural Characterization of 3D Printed Cementitious Materials”, Materials, Vol. 12, Jan. 2019, p. 2993.10.3390/ma12182993676630631527419
]Search in Google Scholar
[
31. Yu, S, Xia, M, Sanjayan, J, Yang, L, Xiao, J, and Du, H, “Microstructural characterization of 3D printed concrete”, Journal of Building Engineering, Vol. 44, Dec. 2021, Article 102948.10.1016/j.jobe.2021.102948
]Search in Google Scholar
[
32. Vantyghem, G, De Corte, W, Boel, V, and Steeman, M, “Structural and thermal performances of topological optimized masonry blocks”, Asian Congress of Structural and Multidisciplinary Optimization 2016, 2016.
]Search in Google Scholar
[
33. Westerlind, H and Hernández, J, “Knitting Concrete”, Second RILEM International Conference on Concrete and Digital Fabrication (Bos, F. P, Lucas, S. S, Wolfs, R. J, and Salet, T. A, eds.), (Cham), Springer International Publishing, 2020, pp. 988–997.10.1007/978-3-030-49916-7_96
]Search in Google Scholar
[
34. van den Heever, M, Bester, F, Kruger, J, and van Zijl, G, “Numerical modelling strategies for reinforced 3D concrete printed elements,” Additive Manufacturing, Vol. 50, Feb. 2022, Article, 102569.10.1016/j.addma.2021.102569
]Search in Google Scholar
[
35. Singamneni, S, Roychoudhury, A, Diegel, O, and Huang, B, “Modelling and evaluation of curved layer fused deposition”, Journal of Materials Processing Technology, Vol. 212, Jan. 2012, pp. 27–35.10.1016/j.jmatprotec.2011.08.001
]Search in Google Scholar
[
36. Cheng, T, Tahouni, Y, Wood, D, Stolz, B, Mülhaupt, R, and Menges, A, “Multifunctional Mesostructures: Design and Material Programming for 4D-printing”, Symposium on Computational Fabrication, SCF ’20, (New York, NY, USA), Association for Computing Machinery, Nov. 2020, pp. 1–10.10.1145/3424630.3425418
]Search in Google Scholar
[
37. Li, S, Wang, S, Yu, Y, Zhang, X, and Wang, Y, “Design of heterogeneous mesoscale structure for high mechanical properties based on force-flow: 2D geometries”, Additive Manufacturing, Vol. 46, Oct. 2021, Article 102063.10.1016/j.addma.2021.102063
]Search in Google Scholar
[
38. Dirrenberger, J, “From Architectured Materials to Large-Scale Additive Manufacturing”, Robotic Building (Bier, H, ed.), Springer Series in Adaptive Environments, Springer International Publishing, 2018, pp. 79–96.10.1007/978-3-319-70866-9_4
]Search in Google Scholar
[
39. Breseghello, L, “Toolpath Simulation, Design and Manipulation in Robotic 3D Concrete Printing”, in A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (Eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 623-632.10.52842/conf.caadria.2021.1.623
]Search in Google Scholar
[
40. Wu, J, Aage, N, Westermann, R, and Sigmund, O, “Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures”, IEEE Transactions on Visualization and Computer Graphics, Vol. 24, Feb. 2018, pp. 1127–1140.10.1109/TVCG.2017.265552328129160
]Search in Google Scholar
[
41. Roesler, J, Paulino, G, Gaedicke, C, Bordelon, A, and Park, K, “Fracture Behavior of Functionally Graded Concrete Materials for Rigid Pavements”, Transportation Research Record, Vol. 2037, Jan. 2007, pp. 40–49.10.3141/2037-04
]Search in Google Scholar
[
42. Wen, X.-d, Tu, J.-l, and Gan, W.-z, “Durability protection of the functionally graded structure concrete in the splash zone”, Construction and Building Materials, Vol. 41, Apr. 2013, pp. 246–251.10.1016/j.conbuildmat.2012.11.119
]Search in Google Scholar
[
43. Nes, L. G and Øverli, J. A, “Structural behaviour of layered beams with fibre-reinforced LWAC and normal density concrete”, Materials and Structures, Vol. 49, Jan. 2016, pp. 689–703.10.1617/s11527-015-0530-9
]Search in Google Scholar
[
44. Bajaj, K, Shrivastava, Y, and Dhoke, P, “Experimental Study of Functionally Graded Beam with Fly Ash”, Journal of The Institution of Engineers (India): Series A, Vol. 94, Nov. 2013, pp. 219–227.10.1007/s40030-014-0057-z
]Search in Google Scholar
[
45. Heinz, P, Herrmann, M, and Sobek, W, “Herstellungsverfahren und Anwendungsbereiche für functional gradierte Bauteile im Bauwesen. Abschlussbericht”, 2012.
]Search in Google Scholar
[
46. Herrmann, M and Sobek, W, “Functionally graded concrete: Numerical design methods and experimental tests of mass-optimized structural components”, Structural Concrete, Vol. 18, no. 1, 2017, pp. 54–66.10.1002/suco.201600011
]Search in Google Scholar
[
47. Buswell, R. A, da Silva, W. R. L, Bos, F. P, Schipper, H. R, Lowke, D, Hack, N, Kloft, H, Mechtcherine, V, Wangler, T, and Roussel, N, “A process classification framework for defining and describing Digital Fabrication with Concrete”, Cement and Concrete Research, Vol. 134, Aug. 2020, Article 106068.10.1016/j.cemconres.2020.106068
]Search in Google Scholar
[
48. Bos, F, Wolfs, R, Ahmed, Z, and Salet, T, “Additive manufacturing of concrete in construction: Potentials and challenges of 3D concrete printing”, Virtual and Physical Prototyping, Vol. 11, no. 3, 2016, pp. 209–225.10.1080/17452759.2016.1209867
]Search in Google Scholar
[
49. Pajonk, A, Prieto, A, Blum, U, and Knaack, U, “Multi-material additive manufacturing in architecture and construction: A review”, Journal of Building Engineering, Vol. 45, Jan. 2022, Article 103603.10.1016/j.jobe.2021.103603
]Search in Google Scholar
[
50. Tay, Y. W. D, Panda, B, Paul, S. C, Mohamed, N. A. N, Tan, M. J, and Leong, K. F, “3D printing trends in building and construction industry: A review”, Virtual and Physical Prototyping, Vol. 12, July 2017, pp. 261–276.10.1080/17452759.2017.1326724
]Search in Google Scholar
[
51. Craveiro, F, Bártolo, H, and Bártolo, P, “Functionally graded structures through building manufacturing”, Advanced Materials Research, Vol. 683, 2013, pp. 775–778.10.4028/www.scientific.net/AMR.683.775
]Search in Google Scholar
[
52. Craveiro, F, Duarte, J. P, Bártolo, H, and Bartolo, P. J, “Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0”, Automation in Construction, Vol. 103, July 2019, pp. 251–267.10.1016/j.autcon.2019.03.011
]Search in Google Scholar
[
53. Craveiro, F, Nazarian, S, Bartolo, H, Bartolo, P. J, and Pinto Duarte, J, “An automated system for 3D printing functionally graded concrete-based materials”, Additive Manufacturing, Vol. 33, May 2020, Article 101146.10.1016/j.addma.2020.101146
]Search in Google Scholar
[
54. Reiter, L, Wangler, T, Anton, A, and Flatt, R. J, “Setting on demand for digital concrete – Principles, measurements, chemistry, validation”, Cement and Concrete Research, Vol. 132, June 2020, Article 106047.10.1016/j.cemconres.2020.106047
]Search in Google Scholar
[
55. Anton, A. Y, “Vertical Modulations”, ACADIA 19: UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019), CUMINCAD, 2019, pp. 596-605.10.52842/conf.acadia.2019.596
]Search in Google Scholar
[
56. Anton, A, Bedarf, P, Yoo, A, Dillenburger, B, Reiter, L, Wangler, T, and Flatt, R. J, “Concrete Choreography: Prefabrication of 3D-Printed Columns”, Fabricate 2020: Making Resilient Architecture, UCL Press, Apr. 2020, pp. 286–293.10.2307/j.ctv13xpsvw.41
]Search in Google Scholar
[
57. Anton, A, Jipa, A, Reiter, L, and Dillenburger, B, “Fast Complexity: Additive Manufacturing for Prefabricated Concrete Slabs”, Second RILEM International Conference on Concrete and Digital Fabrication (Bos, F. P, Lucas, S. S, Wolfs, R. J, and Salet, T. A, eds.), RILEM Bookseries, (Cham), Springer International Publishing, 2020, pp. 1067–1077.10.1007/978-3-030-49916-7_102
]Search in Google Scholar
[
58. Ahmed, Z, Bos, F, van Brunschot, M, and Salet, T, “On-demand additive manufacturing of functionally graded concrete”, Virtual and Physical Prototyping, Vol. 15, no. 2, 2020, pp. 194–210.10.1080/17452759.2019.1709009
]Search in Google Scholar
[
59. Gebhard, L, Mata-Falcón, J, Markić, T, and Kaufmann, W, “Aligned Interlayer Fibre Reinforcement for Digital Fabrication with Concrete”, Fibre Reinforced Concrete: Improvements and Innovations (Serna, P, Llano-Torre, A, Martí-Vargas, J. R, and Navarro-Gregori, J, eds.), RILEM Bookseries, (Cham), Springer International Publishing, 2021, pp. 87–98.10.1007/978-3-030-58482-5_8
]Search in Google Scholar
[
60. Shen, W, Wu, M, Zhang, B, Xu, G, Cai, J, Xiong, X, and Zhao, D, “Coarse aggregate effectiveness in concrete: Quantitative models study on paste thickness, mortar thickness and compressive strength” Construction and Building Materials, Vol. 289, June 2021, p. 123171.10.1016/j.conbuildmat.2021.123171
]Search in Google Scholar
[
61. Duballet, R, Baverel, O, and Dirrenberger, J, “Building Systems in Robotic Extrusion of Cementitious Materials”, PhD thesis, Sept. 2019.
]Search in Google Scholar
[
62. Duballet, R, Gosselin, C, and Roux, P, “Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene Aggregate Concrete Structures”, Modelling Behaviour: Design Modelling Symposium 2015 (Thomsen, M. R, Tamke, M, Gengnagel, C, Faircloth, B, and Scheurer, F, eds.), Cham: Springer International Publishing, 2015, pp. 225–235.10.1007/978-3-319-24208-8_19
]Search in Google Scholar
[
63. Choy, S. Y, Sun, C.-N, Leong, K. F, and Wei, J, “Compressive properties of functionally graded lattice structures manufactured by selective laser melting”, Materials & Design, Vol. 131, Oct. 2017, pp. 112–120.10.1016/j.matdes.2017.06.006
]Search in Google Scholar
[
64. Tay, D. Y. W, “Large scale 3D concrete printing: Process and materials properties”, 2020.
]Search in Google Scholar
[
65. Tay, Y. W. D, Lim, J. H, Li, M, and Tan, M. J, “Creating functionally graded concrete materials with varying 3D printing parameters”, Virtual and Physical Prototyping, Vol. 17, no. 3, Mar. 2022, pp. 662–681.10.1080/17452759.2022.2048521
]Search in Google Scholar
[
66. Yuan, P. F, Zhan, Q, Wu, H, Beh, H. S, and Zhang, L, “Real-time toolpath planning and extrusion control (RTPEC) method for variable- width 3D concrete printing”, Journal of Building Engineering, Vol. 46, Apr. 2022, Article 103716.10.1016/j.jobe.2021.103716
]Search in Google Scholar
[
67. Bendsøe, M. P and Sigmund, O, “Design with anisotropic materials”, Topology Optimization: Theory, Methods, and Applications (Bendsøe, M. P and Sigmund, O, eds.), Berlin, Heidelberg: Springer, 2004, pp. 159–220.10.1007/978-3-662-05086-6_3
]Search in Google Scholar
[
68. Beghini, L. L, Beghini, A, Katz, N, Baker, W. F, and Paulino, G. H, “Connecting architecture and engineering through structural topology optimization”, Engineering Structures, Vol. 59, Feb. 2014, pp. 716–726.10.1016/j.engstruct.2013.10.032
]Search in Google Scholar
[
69. Craveiro, F, Bartolo, H. M, Gale, A, Duarte, J. P, and Bartolo, P. J, “A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing”, Automation in Construction, Vol. 82, Oct. 2017, pp. 75–83.10.1016/j.autcon.2017.05.006
]Search in Google Scholar
[
70. Roussel, N, “Rheological requirements for printable concretes”, Cement and Concrete Research, Vol. 112, Oct. 2018, pp. 76–85.10.1016/j.cemconres.2018.04.005
]Search in Google Scholar
[
71. Suiker, A. S. J, “Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments”, International Journal of Mechanical Sciences, Vol. 137, Mar. 2018, pp. 145–170.10.1016/j.ijmecsci.2018.01.010
]Search in Google Scholar
[
72. Wolfs, R. J. M, Bos, F. P, and Salet, T. A. M, “Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing”, Cement and Concrete Research, Vol. 106, Apr. 2018, pp. 103–116.10.1016/j.cemconres.2018.02.001
]Search in Google Scholar
[
73. Vantyghem, G, Ooms, T, and De Corte, W, “FEM modelling techniques for simulation of 3D concrete printing”, arXiv:2009.06907 [physics], Sept. 2020.
]Search in Google Scholar
[
74. Vantyghem, G, Ooms, T, and De Corte, W, “VoxelPrint: A Grasshopper plug-in for voxel-based numerical simulation of concrete printing”, Automation in Construction, Vol. 122, Feb. 2021, Article 103469.10.1016/j.autcon.2020.103469
]Search in Google Scholar
[
75. Comminal, R, Leal da Silva, W. R, Andersen, T. J, Stang, H, and Spangenberg, J, “Modelling of 3D concrete printing based on computational fluid dynamics”, Cement and Concrete Research, Vol. 138, Dec. 2020, Article 106256.10.1016/j.cemconres.2020.106256
]Search in Google Scholar
[
76. Wolfs, R. J. M, Salet, T. A. M, and Roussel, N, “Filament geometry control in extrusion-based additive manufacturing of concrete: The good, the bad and the ugly”, Cement and Concrete Research, Vol. 150, Dec. 2021, Article 106615.10.1016/j.cemconres.2021.106615
]Search in Google Scholar
[
77. Brauer, C and Aukes, D. M, “Automated Generation of Multi-Material Structures Using the VoxelFuse Framework”, Symposium on Computational Fabrication, SCF ’20, (New York, NY, USA), Association for Computing Machinery, Nov. 2020, pp. 1–8.10.1145/3424630.3425417
]Search in Google Scholar