<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The miniature sensor devices and power-efficient Body Area Networks (BANs) for Human Activity Recognition (HAR) have gained increasing interest in different fields, including Daily Life Assistants (DLAs), medical treatment, sports analysis, etc. The HAR systems normally collect data with wearable sensors and implement the computational tasks with a host machine, where real-time transmission and processing of sensor data raise a challenge for both the network and the host machine. This investigation focuses on the hardware/software co-design for optimized sensing and computing of wearable HAR sensor networks. The contributions include (1) design of a miniature wearable sensor node integrating a Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS IMU) with a Bluetooth Low Energy (BLE) in-built Micro-Control Unit (MCU) for unobtrusive wearable sensing; (2) task-centric optimization of the computation by shifting data pre-processing and feature extraction to sensor nodes for in-situ computing, which reduces data transmission and relieves the load of the host machine; (3) optimization and evaluation of classification algorithms Particle Swarm Optimization-based Support Vector Machine (PSO-SVM) and Cross Validation-based K-Nearest Neighbors (CV-KNN) for HAR with the presented techniques. Finally, experimental studies were conducted with two sensor nodes worn on the wrist and elbow to verify the effectiveness of the recognition of 10 virtual handwriting activities, where 10 recruited participants each repeated an activity 5 times. The results demonstrate that the proposed system can implement HAR tasks effectively with an accuracy of 99.20 %.</p>
</abstract>

The miniature sensor devices and power-efficient Body Area Networks (BANs) for Human Activity Recognition (HAR) have gained increasing interest in different fields, including Daily Life Assistants (DLAs), medical treatment, sports analysis, etc. The HAR systems normally collect data with wearable sensors and implement the computational tasks with a host machine, where real-time transmission and processing of sensor data raise a challenge for both the network and the host machine. This investigation focuses on the hardware/software co-design for optimized sensing and computing of wearable HAR sensor networks. The contributions include (1) design of a miniature wearable sensor node integrating a Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS IMU) with a Bluetooth Low Energy (BLE) in-built Micro-Control Unit (MCU) for unobtrusive wearable sensing; (2) task-centric optimization of the computation by shifting data pre-processing and feature extraction to sensor nodes for in-situ computing, which reduces data transmission and relieves the load of the host machine; (3) optimization and evaluation of classification algorithms Particle Swarm Optimization-based Support Vector Machine (PSO-SVM) and Cross Validation-based K-Nearest Neighbors (CV-KNN) for HAR with the presented techniques. Finally, experimental studies were conducted with two sensor nodes worn on the wrist and elbow to verify the effectiveness of the recognition of 10 virtual handwriting activities, where 10 recruited participants each repeated an activity 5 times. The results demonstrate that the proposed system can implement HAR tasks effectively with an accuracy of 99.20 %.

Integrated Sensing and Computing for Wearable Human Activity Recognition with MEMS IMU and BLE Network

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The miniature sensor devices and power-efficient Body Area Networks (BANs) for Human Activity Recognition (HAR) have gained increasing interest in different...

Integrated Sensing and Computing for Wearable Human Activity Recognition with MEMS IMU and BLE Network

Publicado en línea: 14 may 2022

Páginas: 193 - 201

Recibido: 01 ene 2022

Aceptado: 20 abr 2022

DOI: https://doi.org/10.2478/msr-2022-0024

Palabras clave
Integrated sensing and computing, Human Activity Recognition (HAR), Body Area Networks (BANs), Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS IMU), Bluetooth Low Energy (BLE)

© 2022 Mingxing Zhang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Integrated Sensing and Computing for Wearable Human Activity Recognition with MEMS IMU and BLE Network

Publicado en línea: 14 may 2022

Páginas: 193 - 201

Recibido: 01 ene 2022

Aceptado: 20 abr 2022

DOI: https://doi.org/10.2478/msr-2022-0024

Palabras claveIntegrated sensing and computing, Human Activity Recognition (HAR), Body Area Networks (BANs), Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS IMU), Bluetooth Low Energy (BLE)

© 2022 Mingxing Zhang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
Integrated sensing and computing, Human Activity Recognition (HAR), Body Area Networks (BANs), Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS IMU), Bluetooth Low Energy (BLE)