Electromagnetic Shielding Performance Measurement for Braided-Shield Power Cables at Low Frequency Regimes

[1] Hanigovszki, N., Spiazzi, G., Blaabjerg, F. (2006). An EMC evaluation of the use of unshielded motor cables in AC adjustable speed drive applications. IEEE Transactions on Power Electronics, 21 (1), 273-281.10.1109/TPEL.2005.861182Search in Google Scholar

[2] Baklezos, A.T., Nikolopoulos, C.D., Katsouris, A.G., Koutantos, G.I., Capsalis, C.N. (2016). Electromagnetic emission modeling in case of shielded cabling with respect to the ground dielectric properties. IEEE Transactions on Electromagnetic Compatibility, 58 (6), 1694-1700.10.1109/TEMC.2016.2588583Search in Google Scholar

[3] Yousaf, J., Amin, M., Iqbal, S. (2013). Investigation of low frequency emissions due to interfacing cables in RE 102. In International Conference on Space Science and Communication (IconSpace), 1-3 July 2013. Melaka, Malaysia: IEEE, 65-69.10.1109/IconSpace.2013.6599434Search in Google Scholar

[4] Mariscotti, A. (2007). Induced voltage calculation in electric traction systems: simplified methods, screening factors, and accuracy. IEEE Transactions on Intelligent Transportation Systems, 12 (1), 201-210.Search in Google Scholar

[5] Mardiguian, M. (2012). Simple method for predicting a cable shielding factor, based on transfer impedance. Interference Technology, https://interferencetechnology.com/simple-method-for-predicting-a-cable-shielding-factor-based-on-transfer-impedance/.Search in Google Scholar

[6] Mardiguian, M. (2014). Controlling Radiated Emissions by Design, (3rd ed.). New York, USA: Springer, 291-301.Search in Google Scholar

[7] Hu, P., Zhou, Z.Z., Li, J.P., Zhou, X., Sheng M.J., Li, P., Zhou, Q. (2019). Measurement techniques for electromagnetic shielding behavior of braided-shield power cables: an overview and comparative study. Measurement Science Review, 19 (5), 213-221.10.2478/msr-2019-0028Search in Google Scholar

[8] International Electrotechnical Commission. (2013). Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method. IEC 62153-4-3: 2013. Geneva.Search in Google Scholar

[9] Mushtaq, A., Frei, S. (2016). Alternate methods for transfer impedance measurements of shielded HV-cables and HV-cable-connector systems for EV and HEV. International Journal of RF and Microwave Computer-Aided Engineering, 26 (4), 359-366.10.1002/mmce.20984Search in Google Scholar

[10] International Electrotechnical Commission. (2017). Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) -Surface transfer impedance - line injection method. IEC 62153-4-6:2017. Geneva.Search in Google Scholar

[11] Mushtaq, A., Frei, S., Siebert, K., Barenfangeret, J. (2013). Analysis of shielding effectiveness of HV cable and connector systems used for electric vehicles. In International Conference on Electromagnetic Compatibility (EMC Europe), 2-6 September 2013. Brugge, Belgium: IEEE, 241-246.Search in Google Scholar

[12] Mushtaq, A., Frei, S. (2016). Transfer impedance simulation and measurement methods to analyse shielding behaviour of HV cables used in Electric-Vehicles and Hybrid-Electric-Vehicles. Advances in Radio Science, (14), 139-145.10.5194/ars-14-139-2016Search in Google Scholar

[13] Wulf, M.D., Wouters, P., Sergeant, P., Dupre, L., Hoferlin, E., Jacobs, S., Harlet, P. (2007). Electromagnetic shielding of high-voltage cables. Journal of Magnetism and Magnetic Materials, (316), 908-911.10.1016/j.jmmm.2007.03.137Search in Google Scholar

[14] Zhu, K., Lee W.K., Pong P.W.T. (2017). Energization-status identification of three-phase three-core shielded distribution power cables based on non-destructive magnetic field sensing. IEEE Sensors Journal, (19), 7405-7417.10.1109/JSEN.2017.2756905Search in Google Scholar

[15] National Standards of the People’s Republic of China. (2016). Test Methods for Communication Cable. GB/T 5441-2016. Beijing.Search in Google Scholar

[16] Pollaczek, F. (1931). Sur le champ produit par un conducteur simple infiniment long parcouru par un courant alternatif. Revue Generale De l Electricite, (29), 851-867.Search in Google Scholar

[17] Theethayi, N., Thottappillil, R., Paolone, M., Nucci, C.A., Rachidi F. (2007). External impedance and admittance of buried horizontal wires for transient studies using transmission line analysis. IEEE Transactions on Dielectrics and Electrical Insulation, 14 (3), 751-761.10.1109/TDEI.2007.369540Search in Google Scholar

[18] Ott, H.W. (2009). Electromagnetic Compatibility Engineering. Hoboken, NJ, USA: John Wiley & Sons, Inc., 767-769.10.1002/9780470508510Search in Google Scholar

[19] Tesche, F.M., Ianoz, M.V., Karlsson, T. (2009). EMC Analysis Methods and Computational Models, (Chinese ed.). Beijing, China: Beijing University of Posts and Telecommunications Press, 283-313.Search in Google Scholar