Evaluation and Improvement of a Plastic Production System Using Integrated OEE Methodology: A Case Study

[1] S.H. Huang et al., “Manufacturing productivity improvement using effectiveness metrics and simulation analysis,” Int. J. Prod. Res., vol. 41, no. 3, pp. 513-527, 2003, doi: 10.1080/0020754021000042391. Search in Google Scholar

[2] A. Mahajan, S. Devgan, and R. Zitoune, Additive Manufacturing of Bio-implants. Springer, 2024. Search in Google Scholar

[3] R.I. Esmaeel, N. Zakuan, N.M. Jamal, and H. Taherdoost, “Understanding of business performance from the perspective of manufacturing strategies: Fit manufacturing and overall equipment effectiveness,” Procedia Manuf., vol. 22, pp. 998-1006, 2018, doi: 10.1016/j.promfg.2018.03.142. Search in Google Scholar

[4] A.A. Dadashnejad and C. Valmohammadi, “Investigating the effect of value stream mapping on overall equipment effectiveness: a case study,” Total Qual. Manag. Bus. Excell., vol. 30, no. 3-4, pp. 466-482, 2019, doi: 10.1080/14783363.2017.1308821. Search in Google Scholar

[5] S. Fore and L. Zuze, “Improvement of overall Equipment Effectiveness through TPM – by S Fore, L Zuze,” World Acad. Sci. Eng. Technol., vol. 61, no. December 2006, pp. 402-410, 2010. Search in Google Scholar

[6] P.H. Tsarouhas, “Evaluation of overall equipment effectiveness in the beverage industry: A case study,” Int. J. Prod. Res., vol. 51, no. 2, pp. 515-523, 2013, doi: 10.1080/00207543.2011.653014. Search in Google Scholar

[7] P.H. Tsarouhas, “Overall equipment effectiveness (OEE) evaluation for an automated ice cream production line: A case study,” Int. J. Product. Perform. Manag., vol. 69, no. 5, pp. 1009-1032, 2020, doi: 10.1108/IJPPM-03-2019-0126. Search in Google Scholar

[8] S. Annamalai and D. Suresh, “Implementation of total productive maintenance for overall equipment effectiveness improvement in machine shop,” Int. J. Recent Technol. Eng., vol. 8, no. 3, pp. 7686-7691, 2019, doi: 10.35940/ijrte.C6212.098319. Search in Google Scholar

[9] I. Zennaro, D. Battini, F. Sgarbossa, A. Persona, and R. De Marchi, “Micro downtime: Data collection, analysis and impact on OEE in bottling lines the San Benedetto case study,” Int. J. Qual. Reliab. Manag., vol. 35, no. 4, pp. 965-995, 2018, doi: 10.1108/IJQRM-11-2016-0202. Search in Google Scholar

[10] K.M.N. Muthiah and S.H. Huang, “Overall throughput effectiveness (OTE) metric for factory-level performance monitoring and bottleneck detection,” Int. J. Prod. Res., vol. 45, no. 20, pp. 4753-4769, 2007, doi: 10.1080/00207540600786731. Search in Google Scholar

[11] J.A. Garza-Reyes, S. Eldridge, K.D. Barber, and H. Soriano-Meier, “Overall equipment effectiveness (OEE) and process capability (PC) measures: A relationship analysis,” Int. J. Qual. Reliab. Manag., vol. 27, no. 1, pp. 48-62, 2010, doi: 10.1108/02656711011009308. Search in Google Scholar

[12] F. Wang, “Total Quality Management & Business Evaluating the efficiency of implementing total productive maintenance Evaluating the Efficiency of Implementing Total Productive Maintenance,” Total Qual. Manag. Bus. Excell., no. February 2012, pp. 37-41, 2007. Search in Google Scholar

[13] J. Teknologi, E.T. Prasetio, and R.A. Oktora, “Evaluation of The Effectiveness of Die Casting Machines Using Overall Equipment Effectiveness ( OEE ),” vol. 1, no. September 2021, pp. 99-106, 2024, doi: 10.52330/jtm.v22i1.239. Search in Google Scholar

[14] D. Shetty, A. Ali, and J. J. Chapdelaine, “A model for the total productive manufacturing assessment and implementation Implementing Total Productive Manufacturing (TPM) is a time consuming effort that requires dedicated resources and focused planning in order to be successful. This implementat,” J. Adv. Manuf. Syst., vol. 8, no. 2, pp. 117-136, 2009. Search in Google Scholar

[15] J. Jeon, C. Kim, and H. Lee, “Measuring efficiency of total productive maintenance (TPM): A three-stage data envelopment analysis (DEA) approach,” Total Qual. Manag. Bus. Excell., vol. 22, no. 8, pp. 911-924, 2011, doi: 10.1080/14783363.2011.593865. Search in Google Scholar

[16] P. Nunes, J. Santos, and E. Rocha, “Challenges in predictive maintenance – A review,” CIRP J. Manuf. Sci. Technol., vol. 40, pp. 53-67, 2023, doi: 10.1016/j.cirpj.2022.11.004. Search in Google Scholar

[17] R. McAdam and F. McGeough, “Implementing total productive maintenance in multi-union manufacturing organizations: Overcoming job demarcation,” Total Qual. Manag. Bus. Excell., vol. 11, no. 2, pp. 187-197, 2000, doi: 10.1080/0954412006928. Search in Google Scholar

[18] G. Lanza, J. Stoll, N. Stricker, S. Peters, and C. Lorenz, “Measuring global production effectiveness,” Procedia CIRP, vol. 7, pp. 31-36, 2013, doi: 10.1016/j.procir.2013.05.006. Search in Google Scholar

[19] A. Jain, R. Bhatti, and H. Singh, Total productive maintenance (TPM) implementation practice: a literature review and directions, vol. 5, no. 3. 2014. doi: 10.1108/IJLSS-06-2013-0032. Search in Google Scholar

[20] I.S. Muthalib, M. Rusman, and G.L. Griseldis, “Overall Equipment Effectiveness (OEE) analysis and Failure Mode and Effect Analysis (FMEA) on Packer Machines for minimizing the Six Big Losses-A cement industry case,” IOP Conf. Ser. Mater. Sci. Eng., vol. 885, no. 1, 2020, doi: 10.1088/1757-899X/885/1/012061. Search in Google Scholar

[21] L. Castro-Mercado, J.C. Osorio-Gómez, and J.J. Bravo-Bastidas, Production Analysis of the Beekeeping Chain in Vichada, Colombia. A System Dynamics Approach, vol. 966. 2021. doi: 10.1007/978-3-030-71115-3_5. Search in Google Scholar

[22] F. Anvari, R. Edwards, and A. Starr, “Methodology and theory evaluation of overall equipment effectiveness based on market,” J. Qual. Maint. Eng., vol. 16, no. 3, pp. 256-270, 2010, doi: 10.1108/13552511011072907. Search in Google Scholar

[23] D. Yuniawan, T. Ito, and M.E. Bin, “Calculation of overall equipment effectiveness weight by Taguchi method with simulation,” Concurr. Eng. Res. Appl., vol. 21, no. 4, pp. 296-306, 2013, doi: 10.1177/1063293X13507938. Search in Google Scholar

[24] L. Van De Ginste, E.H. Aghezzaf, and J. Cottyn, “The role of equipment flexibility in Overall Equipment Effectiveness (OEE)-driven process improvement,” Procedia CIRP, vol. 107, pp. 289-294, 2022, doi: 10.1016/j.procir.2022.04.047. Search in Google Scholar

[25] D. Yandriyani, M.L. Sitanggang, and I. Masri, “The effect of low oveerall equipment effectiveness ( OEE ) on working hours and production costs of supplement products,” J. Info Sains Inform. dan Sains, vol. 14, no. 01, pp. 529-538, 2024, doi: 10.54209/infosains.v14i01. Search in Google Scholar

[26] A. R. A. P. V. Nova and M.E. Fontana, “Integrative conceptual framework to support decisions on warehousing operations in forward and reverse flow,” Int. J. Logist. Syst. Manag., vol. 42, no. 1, pp. 53-74, 2022, doi: 10.1504/IJLSM.2022.123520. Search in Google Scholar

[27] J. Mooren, J. De Mast, and R. J. M. M. Does, “Quality quandaries *: The case of premature drill wear out,” Qual. Eng., vol. 24, no. 2, pp. 354-359, 2012, doi: 10.1080/08982112.2011.652584. Search in Google Scholar

[28] S. Mihretu and M. Gopal, “Effect of Work Environment on Organizational Performance: A Comparative Study on Arjo Dedessa and Finchaa Sugar Factory,” Int. J. Ind. Eng. Prod. Res., vol. 32, no. 4, pp. 1-9, 2021, doi: 10.22068/ijiepr.32.4.3. Search in Google Scholar

[29] S. Khawarita, S. Khalida, R. M. S. Anizar, R. Indah, and M.T. Mangara, “Effectiveness of compressor machine by using overall equipment effectiveness (OEE) method,” E3S Web Conf., vol. 73, no. February 2017, 2018, doi: 10.1051/e3sconf/20187305007. Search in Google Scholar

[30] B. Dal, P. Tugwell, and R. Greatbanks, “Overall equipment effectiveness as a measure of operational improvement – A practical analysis,” Int. J. Oper. Prod. Manag., vol. 20, no. 12, pp. 1488-1502, 2000, doi: 10.1108/01443570010355750. Search in Google Scholar

[31] C. EL Mazgualdi, T. Masrour, I. El Hassani, and A. Khdoudi, “Machine learning for KPIs prediction: a case study of the overall equipment effectiveness within the automotive industry,” Soft Comput., vol. 25, no. 4, pp. 2891-2909, 2021, doi: 10.1007/s00500-020-05348-y. Search in Google Scholar

[32] A.S. Badiger and R. Gandhinathan, “A proposal: Evaluation of OEE and impact of six big losses on equipment earning capacity,” Int. J. Process Manag. Benchmarking, vol. 2, no. 3, pp. 234-248, 2008, doi: 10.1504/IJPMB.2008.017962. Search in Google Scholar

[33] Y. Parikh and P. Mahamuni, “Total productive maintenance,” SAE Tech. Pap., no. February 2015, 1998, doi: 10.4271/982092. Search in Google Scholar

[34] M.B. Ramzan, H. Jamshaid, I. Usman, and R. Mishra, “Development and Evaluation of Overall Equipment Effectiveness of Knitting Machines Using Statistical Tools,” SAGE Open, vol. 12, no. 2, 2022, doi: 10.1177/21582440221091249. Search in Google Scholar

[35] M. Caterino et al., “Simulation techniques for production lines performance control,” Procedia Manuf., vol. 42, no. 2019, pp. 91-96, 2020, doi: 10.1016/j.promfg.2020.02.027. Search in Google Scholar

[36] I. Doyer and W.L.L. Bean, “As easy as OEE: enabling productivity improvement in schools by using overall equipment effectiveness as framework for classroom data analysis,” Int. J. Lean Six Sigma, 2023, doi: 10.1108/IJLSS-03-2022-0057. Search in Google Scholar

[37] K.P.B. Sathler, K. Salonitis, and A. Kolios, “Overall Equipment Effectiveness as a Metric for Assessing Operational Losses in Wind Farms: A Critical Review of Literature,” Int. J. Sustain. Energy, vol. 42, no. 1, pp. 374-396, 2023, doi: 10.1080/14786451.2023.2189490. Search in Google Scholar

[38] F.A. Tonny, A. Maliha, M.I. Chayan, and M.D. Xames, “Optimization of overall equipment effectiveness (OEE) factors: Case study of a vegetable oil manufacturing company,” Manag. Sci. Lett., vol. 13, no. 2, pp. 124-135, 2023, doi: 10.5267/j.msl.2022.12.002. Search in Google Scholar

[39] S. Singh, J.S. Khamba, and D. Singh, “Study of energy-efficient attributes of overall equipment effectiveness in Indian sugar mill industries through analytical hierarchy process (AHP),” Int. J. Syst. Assur. Eng. Manag., no. 0123456789, 2023, doi: 10.1007/s13198-023-01865-9. Search in Google Scholar

[40] M.M. Schiraldi and M. Varisco, “Overall Equipment Effectiveness: consistency of ISO standard with literature,” Comput. Ind. Eng., vol. 145, no. May, p. 106518, 2020, doi: 10.1016/j.cie.2020.106518. Search in Google Scholar

[41] I. Kustiyawan, M.R. Roestan, and C. Riani, “Automated Packaging Machine Analysis with The Overall Equipment Efficiency Method,” Int. J. Ind. Eng. Manag. Prod. Res., vol. 34, no. 4, pp. 1-14, 2023, doi: 10.22068/ijiepr.34.4.14. Search in Google Scholar

[42] S.H. Huang et al., “Manufacturing system modeling for productivity improvement,” J. Manuf. Syst., vol. 21, no. 6, p. 488, 2002, doi: 10.1016/s0278-6125(02)80143-1. Search in Google Scholar

[43] P. Antônio Mendonça, R. da Piedade Francisco, and D. de Souza Rabelo, “OEE approach applied to additive manufacturing systems in distributed manufacturing networks,” Comput. Ind. Eng., vol. 171, no. June, pp. 1-17, 2022, doi: 10.1016/j.cie.2022.108359. Search in Google Scholar

[44] P. Muchiri and L. Pintelon, “Performance measurement using overall equipment effectiveness (OEE): Literature review and practical application discussion,” Int. J. Prod. Res., vol. 46, no. 13, pp. 3517-3535, 2008, doi: 10.1080/00207540601142645. Search in Google Scholar

[45] S. Basak, M. Baumers, M. Holweg, R. Hague, and C. Tuck, “Reducing production losses in additive manufacturing using overall equipment effectiveness,” Addit. Manuf., vol. 56, no. January, p. 102904, 2022, doi: 10.1016/j.addma.2022.102904. Search in Google Scholar

[46] S. Nakajima, “Introduction to TPM: Total Productive Maintenance.pdf,” Productivity Press, Cambridge. p. MA, 1988. http://www.plant-maintenance.com/articles/tpm_intro.shtml. Search in Google Scholar

[47] F. Saleem, S. Nisar, M.A. Khan, S.Z. Khan, and M.A. Sheikh, “Overall equipment effectiveness of tyre curing press: A case study,” J. Qual. Maint. Eng., vol. 23, no. 1, pp. 39-56, 2017, doi: 10.1108/JQME-06-2015-0021. Search in Google Scholar

[48] S. Fam, H. Yanto, U.N. Semarang, and D. Prastyo, “Lean manufacturing and overall equipment efficiency ( OEE ) in paper manufacturing and paper products industry Lean Manufacturing and overall equipment efficiency (OEE) in paper manufacturing and paper products industry introduction The process of gl,” J. Adv. Manuf. Technol., vol. 12, no. 1, pp. 461-474, 2018. Search in Google Scholar

[49] H. Pozo, O. Roque da Silva, and T. Tachizawa, “The influence of performance objectives on the implementation of lean manufacturing practices: An analysis based on strategic groups,” Cogent Bus. Manag., vol. 4, no. 1, pp. 1-18, 2017, doi: 10.1080/23311975.2017.1405718. Search in Google Scholar

[50] M.A. Habib, R. Rizvan, and S. Ahmed, “Implementing lean manufacturing for improvement of operational performance in a labeling and packaging plant: A case study in Bangladesh,” Results Eng., vol. 17, no. 100818, 2022, doi: 10.1016/j.rineng.2022.100818. Search in Google Scholar

[51] G. Anand and R. Kodali, “Analysis of lean manufacturing frameworks,” J. Adv. Manuf. Syst., vol. 9, no. 1, pp. 1-30, 2010, doi: 10.1142/S0219686710001776. Search in Google Scholar

[52] G. Ariadi, Surachman, Sumiati, and F. Rohman, “The effect of lean and agile supply chain strategy on financial performance with mediating of strategic supplier integration & strategic customer integration: Evidence from bottled drinking-water industry in Indonesia,” Cogent Bus. Manag., vol. 8, no. 1, pp. 1-19, 2021, doi: 10.1080/23311975.2021.1930500. Search in Google Scholar

[53] N. Garcia-Buendia, J. Moyano-Fuentes, and J.M. Maqueira-Marín, “Lean supply chain management and performance relationships: what has been done and what is left to do,” CIRP J. Manuf. Sci. Technol., vol. 32, pp. 405-423, 2021, doi: 10.1016/j.cirpj.2021.01.016. Search in Google Scholar

[54] A. A.P, A. E.K, I. N.M, and I. E.E, “Lean management and performance of telecommunication firms: The mediating role of workplace structure,” Cogent Bus. Manag., vol. 7, no. 1, 2020, doi: 10.1080/23311975.2020.1761637. Search in Google Scholar

[55] A. da Silva, A. Dionísio, and L. Coelho, “Flexible-lean processes optimization: A case study in stone sector,” Results Eng., vol. 6, no. January, p. 100129, 2020, doi: 10.1016/j.rineng.2020.100129. Search in Google Scholar

[56] M.S. Bin Abd Rahman, E. Mohamad, and A.A. Bin Abdul Rahman, “Development of IoT – enabled data analytics enhance decision support system for lean manufacturing process improvement,” Concurr. Eng. Res. Appl., vol. 29, no. 3, pp. 208-220, 2021, doi: 10.1177/1063293X20987911. Search in Google Scholar

[57] M. Zubair et al., “Manufacturing productivity analysis by applying overall equipment effectiveness metric in a pharmaceutical industry,” Cogent Eng., vol. 8, no. 1, 2021, doi: 10.1080/23311916.2021.1953681. Search in Google Scholar

[58] T. Haddad, B.W. Shaheen, and I. Németh, “Improving Overall Equipment Effectiveness ( OEE ) of Extrusion Machine Using Lean Manufacturing Approach Improving Overall Equipment Effectiveness ( OEE ) of Extrusion Machine Using Lean Manufacturing Approach,” Manuf. Technol., vol. 21, no. 1, 2021, doi: 10.21062/mft.2021.006. Search in Google Scholar

[59] E.J. Clements, V. Sonwaney, and R.K. Singh, “Measurement of overall equipment effectiveness to improve operational efficiency,” Int. J. Process Manag. Benchmarking, vol. 8, no. 2, p. 246, 2018, doi: 10.1504/ijpmb.2018.10010267. Search in Google Scholar

[60] L. Foulloy, V. Clivillé, and L. Berrah, “A fuzzy temporal approach to the Overall Equipment Effectiveness measurement,” Comput. Ind. Eng., vol. 127, no. November 2018, pp. 103-115, 2019, doi: 10.1016/j.cie.2018.11.043. Search in Google Scholar

[61] M. Braglia, M. Frosolini, and F. Zammori, “Overall equipment effectiveness of a manufacturing line (OEEML): An integrated approach to assess systems performance,” J. Manuf. Technol. Manag., vol. 20, no. 1, pp. 8-29, 2008, doi: 10.1108/17410380910925389. Search in Google Scholar

[62] M. Baghbani, S. Iranzadeh, and M. Bagherzadeh khajeh, “Investigating the relationship between RPN parameters in fuzzy PFMEA and OEE in a sugar factory,” J. Loss Prev. Process Ind., vol. 60, no. January, pp. 221-232, 2019, doi: 10.1016/j.jlp.2019.05.003. Search in Google Scholar

[63] L. Ouyang and Y. Nie, “An improved FMEA model considering information quality in a multi-granularity probability linguistic environment,” Qual. Eng., vol. 35, no. 2, pp. 207-221, 2022, doi: 10.1080/08982112.2022.2106438. Search in Google Scholar

[64] H.-C. Liu, J.-X. You, X.-F. Ding, Su, and Qiang, “Improving risk evaluation in FMEA with a hybrid multiple criteria decision making method,” nternational J. Qual. Reliab. Manag., 2015, doi: 10.1108/MBE-09-2016-0047. Search in Google Scholar

[65] H. Akbarzade Khorshidi, I. Gunawan, and M.Y. Ibrahim, “Applying UGF Concept to Enhance the Assessment Capability of FMEA,” Qual. Reliab. Eng. Int., vol. 32, no. 3, pp. 1085-1093, 2016, doi: 10.1002/qre.1817. Search in Google Scholar

[66] R. Sharma, “Overall equipment effectiveness measurement of TPM manager model machines in flexible manufacturing environment: A case study of automobile sector,” Int. J. Product. Qual. Manag., vol. 26, no. 2, pp. 206-222, 2019, doi: 10.1504/IJPQM.2019.097767. Search in Google Scholar

[67] A.P. Puvanasvaran, C.Z. Mei, and V.A. Alagendran, “Overall equipment efficiency improvement using time study in an aerospace industry,” Procedia Eng., vol. 68, pp. 271-277, 2013, doi: 10.1016/j.proeng.2013.12.179. Search in Google Scholar

[68] A. Azizi, “Evaluation Improvement of Production Productivity Performance using Statistical Process Control, Overall Equipment Efficiency, and Autonomous Maintenance,” Procedia Manuf., vol. 2, no. February, pp. 186-190, 2015, doi: 10.1016/j.promfg.2015.07.032. Search in Google Scholar

[69] H. Fourie, “Improvement in the overall efficiency of mining equipment: A case study,” J. South. African Inst. Min. Metall., vol. 116, no. 3, pp. 275-281, 2016, doi: 10.17159/2411-9717/2016/v116n3a9. Search in Google Scholar

[70] K.M. Abdelbar, D. Bouami, and S. Elfezazi, “New approach towards formulation of the overall equipment effectiveness,” J. Qual. Maint. Eng., vol. 25, no. 1, pp. 90-127, 2019, doi: 10.1108/JQME-07-2017-0046. Search in Google Scholar

[71] A. Sohal, J. Olhager, P. O’Neill, and D. Prajogo, “Implementation of OEE – Issues and challenges,” Proc. APMS 2010 – Int. Conf. Adv. Prod. Manag. Syst., no. August, 2010. Search in Google Scholar

[72] Z.T. Xiang and C.J. Feng, “Implementing total productive maintenance in a manufacturing small or medium-sized enterprise,” J. Ind. Eng. Manag., vol. 14, no. 2, pp. 152-175, 2021, doi: 10.3926/jiem.3286. Search in Google Scholar

[73] P.G. Yazdi, A. Azizi, and M. Hashemipour, “An empirical investigation of the relationship between overall equipment efficiency (OEE) and manufacturing sustainability in industry 4.0 with time study approach,” Sustain., vol. 10, no. 9, 2018, doi: 10.3390/su10093031. Search in Google Scholar

[74] J. García-Arca, J.C. Prado-Prado, and A.J. Fernández-González, “Integrating KPIs for improving efficiency in road transport,” Int. J. Phys. Distrib. Logist. Manag., vol. 48, no. 9, pp. 931-951, 2018, doi: 10.1108/IJPDLM-05-2017-0199. Search in Google Scholar

[75] F. Zammori, “Fuzzy Overall Equipment Effectiveness (FOEE): Capturing performance fluctuations through LR Fuzzy numbers,” Prod. Plan. Control, vol. 26, no. 6, pp. 451-466, 2015, doi: 10.1080/09537287.2014.920545. Search in Google Scholar

[76] M. Fekri Sari and S. Avakh Darestani, “Fuzzy overall equipment effectiveness and line performance measurement using artificial neural network,” J. Qual. Maint. Eng., vol. 25, no. 2, pp. 340-354, 2019, doi: 10.1108/JQME-12-2017-0085. Search in Google Scholar

[77] H. Tang, “A new method of bottleneck analysis for manufacturing systems,” Manuf. Lett., vol. 19, pp. 21-24, 2019, doi: 10.1016/j.mfglet.2019.01.003. Search in Google Scholar

[78] C.C. Mathematics, S. Sunadi, H.H. Purba, U.M. Buana, and E. Paulina, “Overall Equipment Effectiveness to Increase Productivity of Injection Molding Machine: A Case Study in Plastic Manufacturing Industry,” ComTech, no. June, pp. 53-64, 2021, doi: 10.21512/comtech.v12i1.6706. Search in Google Scholar

[79] S. Nallusamy, “Enhancement of productivity and efficiency of CNC machines in a small scale industry using total productive maintenance,” Int. J. Eng. Res. Africa, vol. 25, no. August, pp. 119-126, 2016, doi: 10.4028/www.scientific.net/JERA.25.119. Search in Google Scholar

[80] H. Soltanali, A. Rohani, M. Tabasizadeh, M. Hossein Abbaspour-Fard, A. Parida, and P.D. Student, “Improving the performance measurement using overall equipment effectiveness in an automotive industry,” Int. J. Automot. Eng., vol. 8, no. 3, pp. 2781-2791, 2018, doi: 10.22068/ijae.8.3.2781. Search in Google Scholar

[81] S. Muthukumar and M. Thiruchitrambalam, “Performance augmentation of machining centers by improving the overall equipment effectiveness in subsystems,” IOP Conf. Ser. Mater. Sci. Eng., vol. 993, no. 1, 2020, doi: 10.1088/1757-899X/993/1/012024. Search in Google Scholar

[82] Z.A. Fadhlurrahman, Yuniaristanto, M. Hisjam, and R. Zakaria, “Supply Chain Performance Analysis Using Hybrid Overall Equipment Effectiveness and Discrete Event Simulation (Case Study: Futura Energy Nusantara),” IOP Conf. Ser. Mater. Sci. Eng., vol. 943, no. 1, 2020, doi: 10.1088/1757-899X/943/1/012050. Search in Google Scholar

[83] S. Phogat and A.K. Gupta, “Identification of problems in maintenance operations and comparison with manufacturing operations: A review,” J. Qual. Maint. Eng., vol. 23, no. 2, pp. 226-238, 2017, doi: 10.1108/JQME-06-2016-0027. Search in Google Scholar

[84] R. Oliveira, S.A. Taki, S. Sousa, and M.A. Salimi, “Global process effectiveness: When overall equipment effectiveness meets adherence to schedule,” Procedia Manuf., vol. 38, no. 2019, pp. 1615-1622, 2019, doi: 10.1016/j.promfg.2020.01.123. Search in Google Scholar

[85] A. Zuashkiani, H. Rahmandad, and A.K.S. Jardine, “Mapping the dynamics of overall equipment effectiveness to enhance asset management practices,” J. Qual. Maint. Eng., vol. 17, no. 1, pp. 74-92, 2011, doi: 10.1108/13552511111116268. Search in Google Scholar

[86] A.H.C. Tsang and P.K. Chan, “TPM implementation in China: A case study,” Int. J. Qual. Reliab. Manag., vol. 17, no. 2, pp. 144-157, 2000, doi: 10.1108/02656710010304555. Search in Google Scholar

[87] J.J. Rojas-Reyes, J.R. Montoya-Torres, and E.L. Solano-Charris, “A decision support system for the multi-client storage location assignment problem,” Int. J. Logist. Syst. Manag., vol. 42, no. 1, pp. 89-116, 2022, doi: 10.1504/IJLSM.2022.123528. Search in Google Scholar

[88] T. Sasaki, N. Koga, K. Shirai, Y. Kobayashi, and A. Toyoshima, “Experimental study on ejection forces of injection molding,” Precis. Eng., vol. 24, no. 3, pp. 270-273, 2000, doi: 10.1016/S0141-6359(99)00039-2. Search in Google Scholar

[89] F. Kimura, S. Kadoya, and Y. Kajihara, “Effects of molding conditions on injection molded direct joining using a metal with nano-structured surface,” Precis. Eng., vol. 45, pp. 203-208, 2016, doi: 10.1016/j.precisioneng.2016.02.013. Search in Google Scholar

[90] A.M. Abed, A. Alarjani, L.F. Seddek, and S. Elattar, “Modify the Injection Machine Mechanism to Enhance the Recycling of Plastic Waste Mixed with MHD Nanoparticles,” pp. 1-36, 2023. Search in Google Scholar

[91] A. Kuiper, M. Van Raalte, and R. J. M. M. Does, “Quality quandaries: Improving the overall equipment effectiveness at a pharmaceutical company,” Qual. Eng., vol. 26, no. 4, pp. 478-483, 2014, doi: 10.1080/08982112.2014.936457. Search in Google Scholar

[92] A.P. Puvanasvaran, S.S. Yoong, and C.C. Tay, “Effect of hidden wastes in overall equipment effectiveness calculation,” ARPN J. Eng. Appl. Sci., vol. 12, no. 22, pp. 6443-6448, 2017. Search in Google Scholar

[93] H. Chen et al., “Measurement of overall equipment effectiveness as a basis for TPM activities Õrjan Ljungberg”Expanding the concept of requirements traceability: The role of electronic records ma,” Int. J. Oper. Prod. Manag., vol. 18, no. 37, pp. 510–528, 2011, http://dx.doi.org/10.1108/01443579810206334 Search in Google Scholar