<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper is aimed at measuring innovation and qualification of technological operations in automotive production within the quality management system. Quality requirements according to ISO/TS 16949 promote a process approach for the design and development, production, installation and servicing of automotive products, which can result in increased quality, reduced variation and increase of efficiency. The solution focuses on the process of approval of parts in series production (Production Part Approval Process – PPAP). The PPAP purpose is to determine whether an organization properly understood all customer requirements listed in the specifications and records of the technical design of the product. PPAP further verifies that the process has the potential to produce a product in series production so that customer requirements will be met, in actual production volume and at the agreed rate of production. Specifically, a toothed winch of hydroelectric generator is solved by the case study.</p>
</abstract>

The paper is aimed at measuring innovation and qualification of technological operations in automotive production within the quality management system. Quality requirements according to ISO/TS 16949 promote a process approach for the design and development, production, installation and servicing of automotive products, which can result in increased quality, reduced variation and increase of efficiency. The solution focuses on the process of approval of parts in series production (Production Part Approval Process – PPAP). The PPAP purpose is to determine whether an organization properly understood all customer requirements listed in the specifications and records of the technical design of the product. PPAP further verifies that the process has the potential to produce a product in series production so that customer requirements will be met, in actual production volume and at the agreed rate of production. Specifically, a toothed winch of hydroelectric generator is solved by the case study.

Superstructure of ISO/TS 16949 for the Measurement of Material-Technological Parameters of the Products in Automotive Production

Management Systems in Production Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

The paper is aimed at measuring innovation and qualification of technological operations in automotive production within the quality management system. Quality...

Superstructure of ISO/TS 16949 for the Measurement of Material-Technological Parameters of the Products in Automotive Production

Publicado en línea: 24 jun 2021

Páginas: 178 - 183

Recibido: 01 sept 2020

Aceptado: 01 may 2021

DOI: https://doi.org/10.2478/mspe-2021-0022

Palabras clave
automotive production, comprehensive quality, supply chain, series production, part approval process

© 2021 Andrea Seňová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Superstructure of ISO/TS 16949 for the Measurement of Material-Technological Parameters of the Products in Automotive Production

Publicado en línea: 24 jun 2021

Páginas: 178 - 183

Recibido: 01 sept 2020

Aceptado: 01 may 2021

DOI: https://doi.org/10.2478/mspe-2021-0022

Palabras claveautomotive production, comprehensive quality, supply chain, series production, part approval process

© 2021 Andrea Seňová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
automotive production, comprehensive quality, supply chain, series production, part approval process