<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The KOBO extrusion process is an unconventional method of extrusion based on the phenomenon of superplasticity as an effect of a special state caused by the oscillatory motion of the die at a certain angle a certain frequency. It significantly lowers the extrusion force and makes it possible to extrude lightweight metals and alloys (e.g. aluminum and magnesium alloys) in cold extrusion with high extrusion ratios compared to conventional hot extrusion.</p>
<p>This work studies the influence of the tool (die) geometry on process realization parameters and the properties of the extrudate. Experimental studies of cold KOBO extrusion were performed using dies with different face portion geometry. The obtained extrudate obtained from EN-AW 7075 aluminum billets was examined for mechanical properties and macro/microstructure, showing that, with adequate modifications to the tool face part geometry, it is possible to lower the extrusion force and obtain extrudate with desired properties.</p>
</abstract>

The KOBO extrusion process is an unconventional method of extrusion based on the phenomenon of superplasticity as an effect of a special state caused by the oscillatory motion of the die at a certain angle a certain frequency. It significantly lowers the extrusion force and makes it possible to extrude lightweight metals and alloys (e.g. aluminum and magnesium alloys) in cold extrusion with high extrusion ratios compared to conventional hot extrusion.
This work studies the influence of the tool (die) geometry on process realization parameters and the properties of the extrudate. Experimental studies of cold KOBO extrusion were performed using dies with different face portion geometry. The obtained extrudate obtained from EN-AW 7075 aluminum billets was examined for mechanical properties and macro/microstructure, showing that, with adequate modifications to the tool face part geometry, it is possible to lower the extrusion force and obtain extrudate with desired properties.

Analysis of the influence of dies geometry on the process extrusion force and properties of the extrudate obtained in the process of cold extrusion of 7075 aluminum alloy by the KOBO method

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The KOBO extrusion process is an unconventional method of extrusion based on the phenomenon of superplasticity as an effect of a special state caused by the...

Analysis of the influence of dies geometry on the process extrusion force and properties of the extrudate obtained in the process of cold extrusion of 7075 aluminum alloy by the KOBO method

Publicado en línea: 22 may 2024

Páginas: 92 - 106

Recibido: 29 dic 2023

Aceptado: 24 abr 2024

DOI: https://doi.org/10.2478/msp-2024-0008

Palabras clave
aluminum extrusion, KOBO method, 7075 aluminum, bulk forming

© 2024 Marek Zwolak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Analysis of the influence of dies geometry on the process extrusion force and properties of the extrudate obtained in the process of cold extrusion of 7075 aluminum alloy by the KOBO method

Publicado en línea: 22 may 2024

Páginas: 92 - 106

Recibido: 29 dic 2023

Aceptado: 24 abr 2024

DOI: https://doi.org/10.2478/msp-2024-0008

Palabras clavealuminum extrusion, KOBO method, 7075 aluminum, bulk forming

© 2024 Marek Zwolak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
aluminum extrusion, KOBO method, 7075 aluminum, bulk forming