<abstract xmlns="http://www.w3.org/1999/xhtml">As implied in the title, the triple-layer remote phosphor (TRP), constructed with the yellow YAG:Ce3+ layer at the bottom, the red CaMgSi2O6:Eu2+,Mn2+ phosphor layer on the top, and the green Ba2Li2Si2O7:Sn2+,Mn2+ phosphor layer between these two layers, is suggested in this paper to improve the color and luminescence of white LEDs (WLEDs). In order to control the red light for the purpose of increasing the color rendering index (CRI), it is suggested that the red CaMgSi2O6:Eu2+,Mn2+ phosphor should be applied in the TRP structure. Simultaneously, the structure uses the green Ba2Li2Si2O7:Sn2+,Mn2+ phosphor layer to control the green light, which increases the luminous efficacy (LE) of WLEDs. In addition, when the concentration of these two phosphors increases, the yellow YAG:Ce3+ concentration must be reduced to keep the average correlated color temperatures (ACCTs) stable at 6000 K to 8500 K. Besides, appropriate adjusting of CRI, LE, and color quality scale (CQS) is also analyzed by modifying the concentration of the green phosphor and red phosphor. The results show that the CRI can get better values if CaMgSi2O6:Eu2+,Mn2+ concentration is higher. In contrast, the CRI decreases dramatically when the concentration of Ba2Li2Si2O7:Sn2+,Mn2+ increases. Meanwhile, CQS can be significantly increased in the range of 10 % to 14 % CaMgSi2O6:Eu2+,Mn2+, regardless of the concentration of Ba2Li2Si2O7:Sn2+,Mn2+. In particular, along with the improvement of CRI and CQS, LE can also be increased by more than 40 % by reducing the scattered light and adding the green light. Obtained results are a valuable reference for manufacturers for improving WLEDs color and luminescence quality to produce a broader range of WLEDs with better quality fulfilling social needs.</abstract>

As implied in the title, the triple-layer remote phosphor (TRP), constructed with the yellow YAG:Ce3+ layer at the bottom, the red CaMgSi2O6:Eu2+,Mn2+ phosphor layer on the top, and the green Ba2Li2Si2O7:Sn2+,Mn2+ phosphor layer between these two layers, is suggested in this paper to improve the color and luminescence of white LEDs (WLEDs). In order to control the red light for the purpose of increasing the color rendering index (CRI), it is suggested that the red CaMgSi2O6:Eu2+,Mn2+ phosphor should be applied in the TRP structure. Simultaneously, the structure uses the green Ba2Li2Si2O7:Sn2+,Mn2+ phosphor layer to control the green light, which increases the luminous efficacy (LE) of WLEDs. In addition, when the concentration of these two phosphors increases, the yellow YAG:Ce3+ concentration must be reduced to keep the average correlated color temperatures (ACCTs) stable at 6000 K to 8500 K. Besides, appropriate adjusting of CRI, LE, and color quality scale (CQS) is also analyzed by modifying the concentration of the green phosphor and red phosphor. The results show that the CRI can get better values if CaMgSi2O6:Eu2+,Mn2+ concentration is higher. In contrast, the CRI decreases dramatically when the concentration of Ba2Li2Si2O7:Sn2+,Mn2+ increases. Meanwhile, CQS can be significantly increased in the range of 10 % to 14 % CaMgSi2O6:Eu2+,Mn2+, regardless of the concentration of Ba2Li2Si2O7:Sn2+,Mn2+. In particular, along with the improvement of CRI and CQS, LE can also be increased by more than 40 % by reducing the scattered light and adding the green light. Obtained results are a valuable reference for manufacturers for improving WLEDs color and luminescence quality to produce a broader range of WLEDs with better quality fulfilling social needs.

The impacts of Ba2Li2Si2O7:Sn2+,Mn2+ and CaMgSi2O6:Eu2+,Mn2+ particles on the optical properties of remote phosphor LED

National Kaohsiung University of Sciences and Technology

Faculty of Electrical and Electronics Engineering

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The impacts of BaLiSiO:Sn,Mn and CaMgSiO:Eu,Mn particles on the optical properties of remote phosphor LED

As implied in the title, the triple-layer remote phosphor (TRP), constructed with the yellow YAG:Ce3+ layer at the bottom, the red CaMgSi2O6:Eu2+,Mn2+ phosphor...

The impacts of Ba₂Li₂Si₂O₇:Sn²⁺,Mn²⁺ and CaMgSi₂O₆:Eu²⁺,Mn²⁺ particles on the optical properties of remote phosphor LED

Publicado en línea: 08 may 2020

Páginas: 197 - 205

Recibido: 13 ene 2019

Aceptado: 18 jun 2019

DOI: https://doi.org/10.2478/msp-2020-0002

Palabras clave
WLEDs, triple-layer structure, remote phosphor package, color quality, luminous flux

© 2020 Ming-Jui Chen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The impacts of Ba2Li2Si2O7:Sn2+,Mn2+ and CaMgSi2O6:Eu2+,Mn2+ particles on the optical properties of remote phosphor LED

Publicado en línea: 08 may 2020

Páginas: 197 - 205

Recibido: 13 ene 2019

Aceptado: 18 jun 2019

DOI: https://doi.org/10.2478/msp-2020-0002

Palabras claveWLEDs, triple-layer structure, remote phosphor package, color quality, luminous flux

© 2020 Ming-Jui Chen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The impacts of Ba₂Li₂Si₂O₇:Sn²⁺,Mn²⁺ and CaMgSi₂O₆:Eu²⁺,Mn²⁺ particles on the optical properties of remote phosphor LED

Palabras clave
WLEDs, triple-layer structure, remote phosphor package, color quality, luminous flux