[
[1] D. Dubina (ed.). (2015). Seismic retrofitting of existing structures using steel-based solutions. Timisoara: Editura Orizonturi Universitare.
]Search in Google Scholar
[
[2] Jawdhari A., Peiris A. & Harik I. (2018). Experimental study on RC beams strengthened with CFRP rod panels. Eng. Struct. 173: p. 693-705. DOI: 10.1016/j.engstruct.2018.06.105.10.1016/j.engstruct.2018.06.105
]Search in Google Scholar
[
[3] Ombres L. (2011). Flexural analysis of reinforced concrete beams strengthened with a cement based high strength composite material. Compos. Struct. 94: p. 143-155. DOI: 10.1016/j.compstruct.2011.07.008.10.1016/j.compstruct.2011.07.008
]Search in Google Scholar
[
[4] D'Ambrisi A. & Focacci F. (2011). Flexural strengthening of RC beams with cement-based composites. J Compos Constr. 15: p. 707-720. DOI: 10.1061/(ASCE)CC.1943-5614.0000218.10.1061/(ASCE)CC.1943-5614.0000218
]Search in Google Scholar
[
[5] Kadhim M.M., Adheem A.H. & Altaee M.J. (2019). Shear Strengthening of RC Beams with FRCM Technique. Int. J. Eng. Technol. 8: p. 169-176.
]Search in Google Scholar
[
[6] Alabdulhady M.Y., Sneed L.H., Abdelkarim O.I. & ElGawady M.A. (2017). Finite element study on the behavior of RC beams strengthened with PBO-FRCM composite under torsion. Compos. Struct. 179: p. 326-339. DOI: 10.1016/j.compstruct.2017.07.079.10.1016/j.compstruct.2017.07.079
]Search in Google Scholar
[
[7] Triantafillou T.C., Papanicolaou C.G., Zissimopoulos P. & Laourdekis T. (2006). Concrete confinement with textile-reinforced mortar jackets. ACI Mater. J. 103: p. 28.
]Search in Google Scholar
[
[8] Peled A. (2007). Confinement of damaged and nondamaged structural concrete with FRP and TRC sleeves. J. Compos. Constr. 11: p. 514-522. DOI: 10.1061/(ASCE)1090-0268(2007)11:5(514).10.1061/(ASCE)1090-0268(2007)11:5(514)
]Search in Google Scholar
[
[9] Ombres L. (2014). Concrete confinement with a cement based high strength composite material. Compos. Struct. 109: p. 294-304. DOI: 10.1016/j.compstruct.2013.10.037.10.1016/j.compstruct.2013.10.037
]Search in Google Scholar
[
[10] Faleschini F., Zanini M.A., Hofer L. & Pellegrino C., (2020). Experimental behavior of reinforced concrete columns confined with carbon-FRCM composites. Construction and Building Materials, 243, 118296. DOI: 10.1016/j.conbuildmat.2020.118296.10.1016/j.conbuildmat.2020.118296
]Search in Google Scholar
[
[11] Trapko T. (2014). Effect of eccentric compression loading on the strains of FRCM confined concrete columns. Constr Build Mater. 61: p. 97-105. DOI: 10.1016/j.conbuildmat.2014.03.007.10.1016/j.conbuildmat.2014.03.007
]Search in Google Scholar
[
[12] Trapko T. (2014). Behaviour of fibre reinforced cementitious matrix strengthened concrete columns under eccentric compression loading. Materials&Design. 54:947-954. DOI: 10.1016/j.matdes.2013.09.008.10.1016/j.matdes.2013.09.008
]Search in Google Scholar
[
[13] Ombress L., Verre S. (2015). Structural behaviour of fabric reinforced cementitious matrix (FRCM) strengthened concrete columns under eccentric loading. Comp.Part B Eng.. 75:235-249. DOI: 10.1016/j.compositesb.2015.01.042.10.1016/j.compositesb.2015.01.042
]Search in Google Scholar
[
[14] Jabr A., El-Ragaby A. & Ghrib F., (2017). Effect of the Fiber Type and Axial Stiffness of FRCM on the Flexural Strengthening of RC Beams. Fibers, 5(1):2. DOI: 10.3390/fib5010002.10.3390/fib5010002
]Search in Google Scholar
[
[15] Jawdhari A., Adheem A.H., Kadhim M.M. (2020). Parametric 3D finite element analysis of FRCM-confined RC columns under eccentric loading, Eng. Struct.; 212: 1–14. DOI: 10.1016/j.engstruct.2020.110504.10.1016/j.engstruct.2020.110504
]Search in Google Scholar
[
[16] Ombress L. & Verre S. (2021). FRCM confined reinforced concrete columns: experimental behavior and modeling”, ACI Symposium Paper, 345, 102-116.
]Search in Google Scholar
[
[17] Fossetti M., Alotta G., Basone F. & Macaluso G. (2017). Simplified analytical models for compressed concrete columns confined by FRP and FRCM system, Materials and Structures, 50(6), 240. DOI: 10.1617/s11527-017-1110-y.10.1617/s11527-017-1110-y
]Search in Google Scholar
[
[18] Campione, G. & Miraglia N. (2003). Strength and strain capacities of concrete compression members reinforced with FRP. Cem Concr Compos. 25(1):31–41. DOI: 10.1016/S0958-9465(01)00048-8.10.1016/S0958-9465(01)00048-8
]Search in Google Scholar
[
[19] Pellegrino C. & Modena C. (2010). Analytical model for FRP confinement of concrete columns with and without internal steel reinforcement. J. Compos Constr., 14(6):693–705. DOI: 10.1061/(ASCE)CC.1943-5614.0000127.10.1061/(ASCE)CC.1943-5614.0000127
]Search in Google Scholar
[
[20] Mirmiran A., Shahawy M., Samaan M. & El-Echary H. (1998). Effect of column parameters on FRP confined concrete. ASCE J Compos Constr 2(4):175–185. DOI: 10.1061/(ASCE)1090-0268(1998)2:4(175).10.1061/(ASCE)1090-0268(1998)2:4(175)
]Search in Google Scholar
[
[21] National Research Council. (2004). CNR-DT200 - Guide for the design and construction of externally bonded FRP systems for strengthening existing structures (Materials, RC and PC Structures, masonry structures). Rome, Italy.
]Search in Google Scholar
[
[22] American Concrete Institute (ACI). (2013). ACI 549.4R-13 - Guide to Design and Construction of Externally Bonded FRCM Systems for Repair and Strengthening Concrete and Masonry Structures. Farmington Hills, MI 48331.
]Search in Google Scholar
[
[23] Canadian Standards Association (CSA). (2002). CAN/CSA-S806-02, R2007, Design and Construction of Building Components with Fibre-Reinforced Polymers. Ontario, Canada: Canadian Standards Association.
]Search in Google Scholar
[
[24] CEB-FIP (2019). Externally applied FRP reinforcement for concrete structures. Technical report. No.90, 229 pages, ISBN 978-2-88394-131-1, July.
]Search in Google Scholar
[
[25] Hasan H., Pascu R. & Georgescu D.P. (2021). Experimental and numerical investigation of plain concrete columns strengthening by FRCM composite material. Journal of Physics: Conference Series, accepted for publication.
]Search in Google Scholar
[
[26] Ruredil. (2009). Technical Notebook - Buildings seismic retrofit with FRCM – Fiber Reinforced Cementitious Matrix composite. United States: Ruredil Technical Direction.
]Search in Google Scholar
[
[27] Prasad M. & Moorthy G. (2016). Flexural Strengthening of RC beam using Fabric Reinforced Cementitious Matrix (FRCM). India: IJSRSET. Vol. 2. 2394-4099.
]Search in Google Scholar
[
[28] Bentur A. & Mindess S. (2007). Fibre Reinforced Cementitious Composites. New York: Taylor and Francis. Vols. 13: 978–0–203–08872–2.
]Search in Google Scholar
[
[29] Walton P.L & Majumdar A.J. (1975). Cement-Based Composites With Mixtures of Different Types of Fibres. Composites 6(5):209-216. DOI: 10.1016/0010-4361(75)90416-4.10.1016/0010-4361(75)90416-4
]Search in Google Scholar
[
[30] Arboleda D. (2014). Fabric Reinforced Cementitious Matrix (FRCM) Composites for Infrastructure Strengthening and Rehabilitation: Characterization Methods. Coral Gables, Florida: University of Miami Libraries Scholarly Repository.
]Search in Google Scholar
[
[31] Hjorth L. (1983). Development and application of high-density cement based materials. Phil. Trans. R. Soc. Lond. A310 (1983) 167–73. https://doi.org/10.1098/rsta.1983.0075.10.1098/rsta.1983.0075
]Search in Google Scholar
[
[32] Wei S., Mandel A.J. & Said S. (1986). Study of the interface strength in steel fiber-reinforced cement-based composites”. In Journal Proceedings (Vol. 83, No. 4, pp. 597-605).
]Search in Google Scholar
[
[33] Ohama, Y. (2011). Concrete-Polymer Composites – The Past, Present and Future. KEM 466, 1–14. https://doi.org/10.4028/www.scientific.net/kem.466.1.10.4028/www.scientific.net/KEM.466.1
]Search in Google Scholar
[
[34] Jabr A., El-Ragaby A. & Ghrib F. (2017). Effect of the Fiber Type and Axial Stiffness of FRCM on the Flexural Strengthening of RC Beams. Fibers. 5.1: 2. DOI: 10.3390/fib5010002.10.3390/fib5010002
]Search in Google Scholar
[
[35] DeLuca G. T. A. (2014). FRCM systems: The second generation of externally bonded composite system for strengthening of concrete and masonry structures”. Journal of structural engineering, pp.22-24.
]Search in Google Scholar
[
[36] Peled A. & Mobasher B. (2007). Tensile Behavior of Fabric Cement-Based Composites: Pultruded and Cast”. Journal of Materials in Civil Engineering. Vol. 19. DOI: 10.1061/(ASCE)0899-1561(2007)19:4(340).10.1061/(ASCE)0899-1561(2007)19:4(340)
]Search in Google Scholar
[
[37] Peled A., Mobasher B. & Pahilajani J. (2004). Pultrusion of Fabric Reinforced High Flyash Blended Cement Composites”. Proceedings, RILEM Technical Meeting, BEFIB. pp. 1473-1482.
]Search in Google Scholar
[
[38] Peled A. & Mobasher B. (2006). Properties of Fabric-Cement Composites Made by Pultrusion. Materials and Structures, Vol. 39, No. 8, pp. 787-797.10.1617/s11527-006-9171-3
]Search in Google Scholar
[
[39] Peled A., Sueki S., Mobasher B. (2006). Bonding in Fabric-Cement Systems: Effects of Fabrication Methods, Journal of Cement and Concrete Research. Vol. 36, No. 9, pp. 1661-1671. DOI: 10.1016/j.cemconres.2006.05.009.10.1016/j.cemconres.2006.05.009
]Search in Google Scholar
[
[40] Donnini J., Corinaldesi V. & Nanni A. (2016). FRCM Mechanical Properties Using Carbon Fabrics with Different Coating Treatments. Composites Part B Engineering. 88:220-228.
]Search in Google Scholar
[
[41] García D., Alonso P., San-José J.T., Garmendia L. & Per-lot C. (2010). Confinement of medium strength concrete cylinders with basalt textile reinforced mortar. Proc. of the 13th Int. Congress on Polymers in Concrete, ICPIC 2010, Madeira, Portugal.
]Search in Google Scholar
