<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Near–dry machining and dry machining lead to increased temperature of the cutting tools. To reduce tool wear and extend the tool lifetime, and, eventually, to keep the accuracy of manufactured parts within acceptable limits as long as possible, a sustainable cooling technique is required. The technology of internal cooling of the cutting tool appears to be the most promising, because it allows eliminating the presence of the coolant on the manufacturing part and delivers the heat–transferring fluid to the very cutting area of the tool. This paper provides a literature review on the closed–loop internally cooled cutting tools (CLICCT) for turning. The current level of knowledge and experimental machining with prototypes has proven that CLICCT can utilize the benefits of dry cooling, having a longer tool life.</p>
</abstract>

Near–dry machining and dry machining lead to increased temperature of the cutting tools. To reduce tool wear and extend the tool lifetime, and, eventually, to keep the accuracy of manufactured parts within acceptable limits as long as possible, a sustainable cooling technique is required. The technology of internal cooling of the cutting tool appears to be the most promising, because it allows eliminating the presence of the coolant on the manufacturing part and delivers the heat–transferring fluid to the very cutting area of the tool. This paper provides a literature review on the closed–loop internally cooled cutting tools (CLICCT) for turning. The current level of knowledge and experimental machining with prototypes has proven that CLICCT can utilize the benefits of dry cooling, having a longer tool life.

The Design and Performance of Internally Cooled Cutting Tools for Turning: A Literature Review

Transport and Aeronautics, Riga Technical University

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Near–dry machining and dry machining lead to increased temperature of the cutting tools. To reduce tool wear and extend the tool lifetime, and, eventually, to...

The Design and Performance of Internally Cooled Cutting Tools for Turning: A Literature Review

Publicado en línea: 29 sept 2023

Páginas: 73 - 94

DOI: https://doi.org/10.2478/lpts-2023-0032

Palabras clave
Closed–loop internal cooling, dry machining, internally cooled cutting tool, near–dry machining, turning

© 2023 A. Korenkovs et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Design and Performance of Internally Cooled Cutting Tools for Turning: A Literature Review

Publicado en línea: 29 sept 2023

Páginas: 73 - 94

DOI: https://doi.org/10.2478/lpts-2023-0032

Palabras claveClosed–loop internal cooling, dry machining, internally cooled cutting tool, near–dry machining, turning

© 2023 A. Korenkovs et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Closed–loop internal cooling, dry machining, internally cooled cutting tool, near–dry machining, turning