<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The study employed the phenomenon of friction between liquid droplets and solid metallic surfaces in surface roughness analysis of engineering materials. Five samples of mild steel plate were prepared to different degrees of surface roughness by facing operation. The sample surfaces were analysed to determine the roughness parameters (mean roughness, root mean square roughness, roughness skewness, and roughness kurtosis) and friction coefficient of the surfaces. Oil droplet sliding velocity was determined using the oil slippage test. The friction coefficient of the surfaces increased with increasing roughness parameter which varied from 26.334 µm at friction coefficient = 0.63 to 13.153 µm at friction coefficient = 0.46. The results from oil slippage test showed that the sliding velocity of the oil drop decreased as the friction coefficient of samples increased. At an inclination angle of 30°, sliding velocity varied from 0.51 cm/s at friction coefficient = 0.63 to 0.92 cm/s at friction coefficient = 0.46. Some of the samples exhibited a deviation in the trend of relationship between friction coefficient and sliding velocity which resulted from the variation in peak height of roughness between the sample surfaces. Oil slippage method predicts the surface behaviours of materials based on their surface parameters.</p>
</abstract>

The study employed the phenomenon of friction between liquid droplets and solid metallic surfaces in surface roughness analysis of engineering materials. Five samples of mild steel plate were prepared to different degrees of surface roughness by facing operation. The sample surfaces were analysed to determine the roughness parameters (mean roughness, root mean square roughness, roughness skewness, and roughness kurtosis) and friction coefficient of the surfaces. Oil droplet sliding velocity was determined using the oil slippage test. The friction coefficient of the surfaces increased with increasing roughness parameter which varied from 26.334 µm at friction coefficient = 0.63 to 13.153 µm at friction coefficient = 0.46. The results from oil slippage test showed that the sliding velocity of the oil drop decreased as the friction coefficient of samples increased. At an inclination angle of 30°, sliding velocity varied from 0.51 cm/s at friction coefficient = 0.63 to 0.92 cm/s at friction coefficient = 0.46. Some of the samples exhibited a deviation in the trend of relationship between friction coefficient and sliding velocity which resulted from the variation in peak height of roughness between the sample surfaces. Oil slippage method predicts the surface behaviours of materials based on their surface parameters.

Development of Methodology for Characterization of Surface Roughness of Solid Metallic Surfaces Using Oil Slippage Method

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The study employed the phenomenon of friction between liquid droplets and solid metallic surfaces in surface roughness analysis of engineering materials. Five...

Development of Methodology for Characterization of Surface Roughness of Solid Metallic Surfaces Using Oil Slippage Method

Publicado en línea: 10 ago 2021

Páginas: 43 - 54

DOI: https://doi.org/10.2478/lpts-2021-0032

Palabras clave
Dry friction, image analysis, oil slippage, surface profilometry, surface roughness parameters

© 2021 I. O. Ohijeagbon et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Development of Methodology for Characterization of Surface Roughness of Solid Metallic Surfaces Using Oil Slippage Method

Publicado en línea: 10 ago 2021

Páginas: 43 - 54

DOI: https://doi.org/10.2478/lpts-2021-0032

Palabras claveDry friction, image analysis, oil slippage, surface profilometry, surface roughness parameters

© 2021 I. O. Ohijeagbon et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
Dry friction, image analysis, oil slippage, surface profilometry, surface roughness parameters