<abstract xmlns="http://www.w3.org/1999/xhtml"><p>When operating a hybrid vehicle (HEV), it is important to reduce maintenance and repair costs. The HEV electric drive (ED) consists of electronic, electrical and mechanical parts and is considered a complex diagnostic model. The availability of an electrical part greatly simplifies the process of monitoring and obtaining information about the state of the system. In order to create a hybrid diesel-electric propulsion system (HDEPS), the choice of structural and functional parameters as diagnostic ones is justified, the control points are chosen, and the necessary accuracy and unambiguity of measurements are determined. Qualitative evaluations of the electrical processes occurring in the power supply circuit of ED from a high-voltage accumulator battery for the selection of diagnostic parameters according to the criteria of sensitivity, informative character, stability and manufacturability of measurements are presented. It has been revealed that during HDEPS diagnostics both stable and transient modes of operation of electric machines should be considered; for analysis of ED technical state it is necessary to have information about current mode of HDEPS load; for measurement of instantaneous values of supply voltage and consumption current it is necessary to select the sensors with short response time and linear conversion function. In terms of sensitivity to structural changes in the circuit and parametric deviations, it is necessary to choose, as diagnostic parameters, the voltage or current, depending on the mode of operation of the ED and the point of measurement of the electrical value. The obtained results are the basis for creating a new system of diagnostics of electric power supply HDEPS in this direction.</p></abstract>

When operating a hybrid vehicle (HEV), it is important to reduce maintenance and repair costs. The HEV electric drive (ED) consists of electronic, electrical and mechanical parts and is considered a complex diagnostic model. The availability of an electrical part greatly simplifies the process of monitoring and obtaining information about the state of the system. In order to create a hybrid diesel-electric propulsion system (HDEPS), the choice of structural and functional parameters as diagnostic ones is justified, the control points are chosen, and the necessary accuracy and unambiguity of measurements are determined. Qualitative evaluations of the electrical processes occurring in the power supply circuit of ED from a high-voltage accumulator battery for the selection of diagnostic parameters according to the criteria of sensitivity, informative character, stability and manufacturability of measurements are presented. It has been revealed that during HDEPS diagnostics both stable and transient modes of operation of electric machines should be considered; for analysis of ED technical state it is necessary to have information about current mode of HDEPS load; for measurement of instantaneous values of supply voltage and consumption current it is necessary to select the sensors with short response time and linear conversion function. In terms of sensitivity to structural changes in the circuit and parametric deviations, it is necessary to choose, as diagnostic parameters, the voltage or current, depending on the mode of operation of the ED and the point of measurement of the electrical value. The obtained results are the basis for creating a new system of diagnostics of electric power supply HDEPS in this direction.

Choice of Parameters for the Electrodrive Diagnostic System of Hybrid Vehicle Traction

Kharkiv National Automobile and Highway University

Department of Accounting, Audit and International Economic Relations

Faculty of Power and Electrical Engineering

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

When operating a hybrid vehicle (HEV), it is important to reduce maintenance and repair costs. The HEV electric drive (ED) consists of electronic, electrical...

Choice of Parameters for the Electrodrive Diagnostic System of Hybrid Vehicle Traction

Publicado en línea: 10 ago 2020

Páginas: 3 - 11

DOI: https://doi.org/10.2478/lpts-2020-0017

Palabras clave
diagnostics, hybrid electric vehicle, hybrid power plants, simulation model, traction electric drive

© 2020 S. Arhun et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Choice of Parameters for the Electrodrive Diagnostic System of Hybrid Vehicle Traction

Publicado en línea: 10 ago 2020

Páginas: 3 - 11

DOI: https://doi.org/10.2478/lpts-2020-0017

Palabras clavediagnostics, hybrid electric vehicle, hybrid power plants, simulation model, traction electric drive

© 2020 S. Arhun et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
diagnostics, hybrid electric vehicle, hybrid power plants, simulation model, traction electric drive