[
1. M. Carvalho da Cunha and M. S. Fernandes de Lima, “The influence of laser surface treatment on the fatigue crack growth of AA 2024-T3 aluminum alloy alclad sheet,” Surf. Coat. Technol. 2017, 329, 244-249. doi: 10.1016/j.surfcoat.2017.08.052.
]Open DOISearch in Google Scholar
[
2. L. Yuan, W. Shi, R. Shivpuri, F. Xu, and D. Shan, “Increased hot forgeability of 2024Al/Al18B4O33w whisker composites at high strain rates,” J Mater Process Technol 2017, 243, 456-464. doi: 10.1016/j.jmatprotec.2017.01.011.
]Open DOISearch in Google Scholar
[
3. T. L. P. Galvão et al., “Improving the functionality and performance of AA2024 corrosion sensing coatings with nanocontainers,” Chem. Eng. J. 2018, 341, 526-538. doi: 10.1016/j.cej.2018.02.061.
]Open DOISearch in Google Scholar
[
4. H. Zhu et al., “Strengthening mechanism in laser-welded 2219 aluminium alloy under the cooperative effects of aging treatment and pulsed electromagnetic loadings,” Materials Science and Engineering: A 2018, 714, 124-139.
]Search in Google Scholar
[
5. A. Ashwin, R. H. Lakshman, C. C. Swaroop, M. Vignesh, R. V. Vignesh, and R. Padmanaban, “Predicting the Wear Rate of Aluminum Alloy AA2024-T351 using Hybrid Linear function and Radial Basis Function,” in IOP Conference Series: Materials Science and Engineering 2019, 561 (1), p. 012046.
]Search in Google Scholar
[
6. S. V. Kozhukharov and C. A. Girginov, “Comparative electrochemical and topographical elucidation of Anodic Aluminum Oxide (AAO) layers formed on technically pure aluminum (TPA) and AA2024-T3 aircraft alloy,” Bulg. Chem. Commun. 2018, 50, 13-21. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85048856864&partnerID=40&md5=a07b531d0f43a4c49218f655a3da9380 (accessed June 1st 2022)
]Search in Google Scholar
[
7. P. C. Suarez-Martinez, J. Robinson, H. An, R. C. Nahas, D. Cinoman, and J. L. Lutkenhaus, “Polymer-clay nanocomposite coatings as efficient, environment-friendly surface pretreatments for aluminum alloy 2024-T3,” Electrochim Acta 2018, 260, 73-81. doi: 10.1016/j.electacta.2017.11.046.
]Open DOISearch in Google Scholar
[
8. K. A. Kumar, S. Murigendrappa, and H. Kumar, “A bottom- up optimization approach for friction stir welding parameters of dissimilar Aa2024-T351 and Aa7075-T651 alloys,” Journal of Materials Engineering and Performance 2017, 26 (7), 3347-3367.
]Search in Google Scholar
[
9. J. R. Davis, J. R. Davis, Ed. Corrosion of Aluminum and Aluminum Alloys. A S M International, 1999.
]Search in Google Scholar
[
10. G. F. Mars, Corrosion Engineering, 3 ed. New York: Mc Graw-Hill Book Company, 2010.
]Search in Google Scholar
[
11. N. A. North and I. D. MacLeod, “4 - Corrosion of metals - Pearson, Colin,” in Conservation of Marine Archaeological Objects. Oxford: Butterworth-Heinemann, 1987, pp. 68-98.
]Search in Google Scholar
[
12. J. C. Bailey, F. C. Porter, and A. W. Pearson, “4.1 - Aluminium and Aluminium Alloys A2 - Shreir, L.L,” in Corrosion: Newnes, 1976, pp. 4:3-4:32.
]Search in Google Scholar
[
13. R. Oltra, L. Colard, and R. Bonzom, “A novel methodology to study localized corrosion under atmospheric simulated corrosion conditions: Toward a continuous monitoring of the corrosion damage on AA2024,” Mater. Corros. 2017, 68 (3), 311-315. doi: 10.1002/maco.201609151.
]Open DOISearch in Google Scholar
[
14. B. G. Prakashaiah, D. Vinaya Kumara, A. Anup Pandith, A. Nityananda Shetty, and B. E. Amitha Rani, “Corrosion inhibition of 2024-T3 aluminum alloy in 3.5% NaCl by thiosemicarbazone derivatives,” Corros. Sci. 2018, 136, 326-338. doi: 10.1016/j.corsci.2018.03.021.
]Open DOISearch in Google Scholar
[
15. R. Vaira Vignesh, R. Padmanaban, and M. Datta, “Influence of FSP on the microstructure, microhardness, intergranular corrosion susceptibility and wear resistance of AA5083 alloy,” Tribology-Materials, Surfaces & Interfaces 2018, 12 (3), 157-169.
]Search in Google Scholar
[
16. R. Khatami, A. Fattah-Alhosseini, Y. Mazaheri, M. K. Keshavarz, and M. Haghshenas, “Microstructural evolution and mechanical properties of ultrafine grained AA2024 processed by accumulative roll bonding,” Int J Adv Manuf Technol 2017, 93 (1-4), 681-689. doi: 10.1007/s00170-017-0547-z.
]Open DOISearch in Google Scholar
[
17. M. Vigneshwar, S. T. Selvamani, P. Hariprasath, and K. Palanikumar, “Analysis of Mechanical, Metallurgical and Fatigue Behavior of Friction Welded AA6061-AA2024 Dissimilar Aluminum Alloys in Optimized Condition,” 2018, vol. 5: Elsevier Ltd, 2nd ed., pp. 7853-7863, doi: 10.1016/j.matpr.2017.11.466. [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85045996397&doi=10.1016%2fjmatpr.2017.11.466&partnerID=40&md5=9dcbcebb45004d57e80c90c987bf9ac9 (accessed June 1st 2022)
]Open DOISearch in Google Scholar
[
18. Z. Wang et al., “Microstructure and properties of friction stir welded 2219 Aluminum alloy under heat treatment and electromagnetic forming process,” Metals 2018, 8 (5), 305.
]Search in Google Scholar
[
19. R. S. Mishra, P. S. De, and N. Kumar, “Fundamental Physical Metallurgy Background for FSW/P,” in Friction Stir Welding and Processing: Science and Engineering. Cham: Springer International Publishing, 2014, pp. 59-93.
]Search in Google Scholar
[
20. Z. Ma, “Friction stir processing technology: a review,” Metallurgical and Materials Transactions A 2008, 39 (3), 642-658.
]Search in Google Scholar
[
21. R. S. Mishra and Z. Ma, “Friction stir welding and processing,” Materials Science and Engineering: R: Reports 2005, 50 (1), 1-78.
]Search in Google Scholar
[
22. S. Mehrez, M. Paidar, K. Cooke, R. V. Vignesh, O. O. Ojo, and B. Babaei, “A comparative study on weld characteristics of AA5083-H112 to AA6061-T6 sheets produced by MFSC and FSSW processes,” Vacuum, Article 2021, 190, ArtNo. 110298. doi: 10.1016/j.vacuum.2021.110298.
]Open DOISearch in Google Scholar
[
23. R. Premkumar, R. V. Vignesh, R. Padmanaban, M. Govindaraju, and R. Santhi, “Investigation on the microstructure, microhardness, and tribological behavior of AA1100-hBN surface composite,” Koroze a Ochrana Materialu 2021, 65 (1), 1-11. doi: 10.2478/kom-2021-0001.
]Open DOISearch in Google Scholar
[
24. I. El-Mahallawi, M. M. Z. Ahmed, A. A. Mahdy, A. M. M. Abdelmotagaly, W. Hoziefa, and M. Refat. Effect of Heat Treatment on Friction-Stir-Processed Nanodispersed AA7075 and 2024 Al Alloys, Minerals, Metals and Materials Series, pp. 297-309, 2017.
]Search in Google Scholar
[
25. J. John, S. P. Shanmughanatan, and M. B. Kiran, “Effect of tool geometry on microstructure and mechanical Properties of friction stir processed AA2024-T351 aluminium alloy,” in Materials Today: Proceedings, 2018, vol. 5: Elsevier Ltd, 1st ed., pp. 2965-2979, doi: 10.1016/j.matpr.2018.01.095. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85042438080&doi=10.1016%2fj.r.2018.01.095&partnerID=40&md5=4f6f04bfcb50a30c689a7bcb7175958d (accessed June 1st 2022)
]Open DOISearch in Google Scholar
[
26. T. A. Kalashnikova et al., “AA2024 microstructural evolution after bidirectional friction stir processing,” 2017, American Institute of Physics Inc., doi: 10.1063/1.5013759. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85038573778&doi=10.1063%2f1.5013759&partnerID=40&md5=e4512823a758b8fd95bc62066f880e2d (accessed June 1st 2022)
]Open DOISearch in Google Scholar
[
27. R. V. Vignesh, R. Padmanaban, and M. Govindaraju, “Investigations on the Surface topography, Corrosion behavior, and Biocompatibility of Friction Stir Processed Magnesium Alloy AZ91D,” Surface Topography: Metrology and Properties 2019, 7 (2), 025020.
]Search in Google Scholar
[
28. R. V. Vignesh, R. Padmanaban, M. Govindaraju, and G. S. Priyadharshini, “Mechanical properties and corrosion behaviour of AZ91D-HAP surface composites fabricated by friction stir processing,” Materials Research Express 2019, 6 (8), 085401.
]Search in Google Scholar
[
29. R. Acuña, M. Cristóbal, C. Abreu, and M. Cabeza, “Microstructure and Wear Properties of Surface Composite Layer Produced by Friction Stir Processing (FSP) in AA2024-T351 Aluminum Alloy,” Metallurgical and Materials Transactions A 2019, 50 (6), 2860-2874.
]Search in Google Scholar
[
30. M. Paidar, K. Tahani, R. Vaira Vignesh, O. O. Ojo, H. R. Ezatpour, and A. Moharrami, “Modified friction stir clinching of 2024-T3 to 6061-T6 aluminium alloy: Effect of dwell time and precipitation-hardening heat treatment,” Mater. Sci. Eng. A 2020, 791, ArtNo. 139734. doi: 10.1016/j.msea.2020.139734.
]Open DOISearch in Google Scholar
[
31. G. Suganya Priyadharshini et al., “Influence of tool traverse speed on microstructure and mechanical properties of CuNi/B4C surface composites,” Trans Inst Met Finish 2021, 99 (1), 38-45. doi: 10.1080/00202967.2020.1846360.
]Open DOISearch in Google Scholar
