Performance analysis of various rotor topologies of surface PM synchronous motor

[1] K. Yamano, S. Morimoto, M. Sanada, and Y. Inoue,“Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM”, IEEJ Journal of Industry Application, vol. 6, no. 6. pp. 409-415, DOI: 10.1541/ieejjia.6.409, 2017. Open DOISearch in Google Scholar

[2] X. Ba, Z. Gong, Y. Guo, C. Zhang, and J. Zhu,“Development of Equivalent Circuit Models of Permanent Magnet Synchronous Motors Considering Core Loss”, Energies, vol. 15, no. 6, https://doi.org/10.3390/en15061995, 2022. Search in Google Scholar

[3] E. K. Beser,“Electrical equivalent circuit for modeling permanent magnet synchronous motors”, Journal of Electrical Engineering, vol. 72, no. 3. pp. 176-183, https://doi.org/10.2478/jee-2021-0024, 2021. Search in Google Scholar

[4] S. Mabrak, S. Chakroune, and D. Khodija,“Analytical Model of Slotted Surface Mounted Permanent Magnet Synchrnous Motors with Non-magnetic Rotor Core”, Modeling, Measurement and Control, A, vol. 92, no. 2-4. pp. 60-66, https://doi.org/10.18280/mmc_a.922-404, 2019. Search in Google Scholar

[5] B.Slusarek,D.Kapelski,L.Antal,P.Zalas,andM.Gwodziewicz, “Synchronous Motor with Hybrid Permanent Magnets on the Rotor”, Sensors, vol. 14, https://doi.org/10.3390%2Fs140712425, 2014. Search in Google Scholar

[6] F. Pop-Piglesan, F. Jurca, C. Oprea, and C. Martis,“Permanent magnet synchronous machine design for low-noise drive systems”, Proceedings of ISMA2014 including USD2014, pp. 1387 -1400, 2014. Search in Google Scholar

[7] G. Verez, G. Barakat, Y. Amara, and G. Hoblos,“Impact of Pole and Slot Combination on Vibrations and Noise of Electromagnetics Origins in Permanent Magnet Synchronous Motors”, IEEE Transactions on Magnetics, vol. 51, no. 3, https://doi.org/10.1109/TMAG.2014.2354019, 2015. Search in Google Scholar

[8] Y. Liu, Zi-Qiang Zhu, C. Gan, S. Brockway, and C. Hilton,“Comparison of optimal slot/pole number combinations of fractional slot permanent magnet synchronous machines having similar slot and pole numbers”, The Journal of Engineering, no. 17. pp. 4585-4589, https://doi.org/10.1049/joe.2018.8202, 2019. Search in Google Scholar

[9] M. Fakam, M. Hecquet, V. Lanfranchi, and A. Randria,“Design and magnetic noise reduction of the Surface Permanent Magnet Synchronous Machine using complex air gap permeance”, IEEE Transactions on Magnetics, vol. 51, no. 4, 2015, pp. 8103809, DOI; 10.1109/TMAG., 2360315, 2014. Search in Google Scholar

[10] J. Si, S. Zhao, L. Zhang, R. Cao, and W. Cao,“The Characteristics Analysis and Cogging Torque Optimization of a Surface-Interior Permanent Magnet Synchronous Motor”, Chinese Journal of Electrical Engineering, vol. 4, no. 4. pp. 41-47, https://doi.org/10.23919/CJEE.2018.8606788, 2018. Search in Google Scholar

[11] Z. Q. Zhu,“Influence of Design Parameters on Cogging Torque in Permanent Magnet Machines”, IEEE Transactions on Energy Conversion, vol. 15, no. 4. pp. 407-412, https://doi.org/10.1109/60.900501, 2000. Search in Google Scholar

[12] I. M. Garcia-Garcia,Á. J. Romero, J.H.Ciudad, and S.M. Arroyo,“Cogging Torque Reduction Based on a New Pre-Slot Technique for a Small Wind Generator”, Energies, vol. 11. 3219, https://doi.org/10.3390/en11113219, 2018. Search in Google Scholar

[13] N. Chen, S. L. Ho, and W. N. Fu,“Optimization of Permanent Magnet Surface Shapes of Electric Motors for Minimization of Cogging Torque Using FEM”, IEEE Transactions on Magnetics, vol. 46 no. 6. pp. 2478-2481, http://dx.doi.org/10.1109/TMAG.2010.2044764, 2010. Search in Google Scholar

[14] F. Scuiller,“Magnet Shape Optimization to Reduce Pulsating Torque for a Five-Phase Permanent-Magnet Low-Speed Machine”, IEEE Transactions on Magnetics, vol. 50, no. 4. pp. 1-9, https://doi.org/10.1109/TMAG.2013.2287855, 2014. Search in Google Scholar

[15] C.-S. Lee, K.-S. Cha, J.-C. Park, and M.-S. Lim,“Tolerance-Insensitive Design of Magnet Shape for a Surface Permanent Magnet Synchronous Motor”, Energies, vol. 13, 1311, https://doi.org/10.3390/en13061311, 2020. Search in Google Scholar

[16] M. Aydin, O. Ocak, and Y. Demir,“Influence of varying magnet pole-arcs and step-skew on permanent magnet AC synchronous motor performance”, Turkish Journal of Electrical Engineering & Computer Science, vol. 28. pp. 3304-3318, https://doi.org/10.3906/elk-2003-179, 2020. Search in Google Scholar

[17] Y. L. Karnavas, I.D. Chasiotis, and E.L. Peponakis,“Permanent Magnet Synchronous Motor Design Using Grey Wolf Optimizer Algorithm”, International Journal of Electrical and Computer Engineering, vol. 6, no. 3. pp. 1353-1362, http://doi.org/10.11591/ijece.v6i3.pp1353-1362, 2016. Search in Google Scholar

[18] W. Purwanto, Risfendra, D. Fernandez, D. S. Putra, and T. Sugiarto,“Design and Comparison of five Topologies Rotor Permanent Magnet Synchronous Motor for High-Speed Spindle Applications”, International Journal of GEOMATE, vol. 13, no. 40. pp. 148-154, https://doi.org/10.21660/2017.40.02765, 2017. Search in Google Scholar

[19] R. Neji, S. Tounski, and F. Sellami,“Contribution to the definition of a permanent magnet motor with reduced production cost for the electrical vehicle propulsion”, European Transactions on Electrical Power, vol. 16. pp. 437-460, http://dx.doi.org/10.1002/etep.95, 2006. Search in Google Scholar

[20] G. Pellegrino, A. Vagati, B. Boazzo, and P. Gugliemi, “Comparison of Induction and PM Synchronous motor drives for EV application including design examples”, IEEE Transactions on Industry Application, vol. 48, no. 6. pp. 2322-2332, http://dx.doi.org/10.1109/TIA.2012.2227092, 2012. Search in Google Scholar

[21] B.-H. Lee, H.-I. Park, and J.-W. Jung,“Design of Surface-Mounted Permanent Magnet synchronous Motor Considering Axial Leakage Flux by using 2-Dimensional Finite Element Analysis”, Journal of Electrical Engineering & Technology, vol. 13, no. 6. pp. 2284-2291, https://doi.org/10.5370/JEET.2018.13.6.2284, 2018. Search in Google Scholar

[22] M. Korkosz and G. Podskarbi,“Laboratory Test of Surface Mounted Permanent Magnet Brushless Motor”, Technical Transactions Electrical Engineering, 3-E. pp. 185-195, DOI: 10.4467/23 53737XCT.16.276.6075, 2016. Search in Google Scholar

[23] L. Antal and P. Zalas,“Soft and synchronous starting of low-power SMPMSM motor”, Przegld Elektrotechniczny, vol. 89, nr. 2b/2013. pp. 173-176, 2012. Search in Google Scholar

[24] “Koncar-Mes”, Available online, https://koncar-mes.hr/wp-content/uploads/2020/08/Electric-motors.pdf (accessed on 01 February 2023). Search in Google Scholar

[25] V. Sarac,“Design Optimization of Induction Motor for Efficiency and Reliability Improvement”, 30th International Conference on Organization and Technology of Maintenance OTO 2021, Lecture Notes in Networks and Systems, vol. 369 pp. 35-49, Springer, Cham, https://doi.org/10.1007/978-3-030-92851-33, 2021. Search in Google Scholar

[26] Ansys Inc. Maxwell 2D Users Guide 2010, Ansys Inc.: Canons-burg, PA, USA, 2020. Search in Google Scholar

[27] “OME Motors”, Available online, https://www.omemotors.es/media/catalogo/es/OMPM%20CATALOGUE.pdf (Accessed on 01 February 2023). Search in Google Scholar

[28] Mathworks, Available online, https://www.mathworks.com/help/sps/ug/permanent-magnet-synchronous-machine.html (Acces sed on 03 February 2023). Search in Google Scholar

[29] C. Ocak, I. Tarimer, A. Dalcali, and D. Uygun,“Investigation Effects of Narrowing Rotor Pole Embrace to Efficiency and Cogging Torque at PM BLDC Motor”, TEM Journal, vol. 5, no. 1. pp. 25-31, https://dx.doi.org/10.18421/TEM51-04, 2016. Search in Google Scholar