<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Dynamic equivalent (DE) is an important process of multi-area interconnected power systems. It allows to perform stability assessment of a specific area (area of interest) at minimum cost. This study is intended to investigate the dynamic equivalent of two relatively large power systems. The fourth-order model of synchronous generators with a simplified excitation system is used as equivalent to the group of generators in the external system. To improve the accuracy of the estimated model, the identification is carried in two stages. First, using the global search Sine Cosine Algorithm (SCA) to find a starting set values, then this set is used as starting point for the fine-tuning made through the Pattern Search (PS) algorithm. To increase the reliability of the model’s parameters, two disturbances are used to avoid the identification based on a specific event. The developed program is applied on two standard power systems, namely, the New England (NE) system and the Northeast Power Coordinating Council (NPCC) system. Simulation results confirm the ability of the optimized model to preserve the main dynamic properties of the original system with accuracy.</p></abstract>

Dynamic equivalent (DE) is an important process of multi-area interconnected power systems. It allows to perform stability assessment of a specific area (area of interest) at minimum cost. This study is intended to investigate the dynamic equivalent of two relatively large power systems. The fourth-order model of synchronous generators with a simplified excitation system is used as equivalent to the group of generators in the external system. To improve the accuracy of the estimated model, the identification is carried in two stages. First, using the global search Sine Cosine Algorithm (SCA) to find a starting set values, then this set is used as starting point for the fine-tuning made through the Pattern Search (PS) algorithm. To increase the reliability of the model’s parameters, two disturbances are used to avoid the identification based on a specific event. The developed program is applied on two standard power systems, namely, the New England (NE) system and the Northeast Power Coordinating Council (NPCC) system. Simulation results confirm the ability of the optimized model to preserve the main dynamic properties of the original system with accuracy.

A novel measurement-based procedure for dynamic equivalents of electric power systems for stability studies using improved sine cosine algorithm

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Dynamic equivalent (DE) is an important process of multi-area interconnected power systems. It allows to perform stability assessment of a specific area (area...

A novel measurement-based procedure for dynamic equivalents of electric power systems for stability studies using improved sine cosine algorithm

Publicado en línea: 31 dic 2019

Páginas: 454 - 464

Recibido: 06 jun 2019

DOI: https://doi.org/10.2478/jee-2019-0078

Palabras clave
dynamic equivalents, model order reduction, parameter estimation, power system dynamics, transient stability

© 2019 Omar Benmiloud et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

A novel measurement-based procedure for dynamic equivalents of electric power systems for stability studies using improved sine cosine algorithm

Publicado en línea: 31 dic 2019

Páginas: 454 - 464

Recibido: 06 jun 2019

DOI: https://doi.org/10.2478/jee-2019-0078

Palabras clavedynamic equivalents, model order reduction, parameter estimation, power system dynamics, transient stability

© 2019 Omar Benmiloud et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Palabras clave
dynamic equivalents, model order reduction, parameter estimation, power system dynamics, transient stability