<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In sharp crested weirs, significant changes occur in the hydraulic characteristics of the flow past the weirs with different geometry. A detailed investigation and better understanding of hydraulic behavior will help practically to choose an appropriate geometry for weir. The purpose of this research is simulate the flow over sharp crested weir and investigate the effect of geometric shapes of sharp crested weirs on hydraulic characteristics of the flow such as pressure, velocity, water level profiles and discharge coefficients. Thus the limitation and usage range of sharp crested weirs are clarified. In this research OpenFOAM open source 3D software with RNG K-ε turbulence model and Volume of Fluid method (VOF) was used to analyze the hydraulic flow passing through sharp crested weir. The correlation coefficient for flow Surface profiles and discharge coefficients among numerical and experimental data is obtained 0.96 for different discharge rates. In the present research, discharge coefficients for rectangular weirs with compression coefficient 0%, trapezoidal and triangular weirs are determined 1.20, 0.68 and 0.51 respectively using discharge rate of 0.05183m<sup>3</sup>/s. The maximum discharge coefficient is obtained for rectangular sharp crested weir while the triangular sharp crested weir has minimum discharge coefficient.</p></abstract>

In sharp crested weirs, significant changes occur in the hydraulic characteristics of the flow past the weirs with different geometry. A detailed investigation and better understanding of hydraulic behavior will help practically to choose an appropriate geometry for weir. The purpose of this research is simulate the flow over sharp crested weir and investigate the effect of geometric shapes of sharp crested weirs on hydraulic characteristics of the flow such as pressure, velocity, water level profiles and discharge coefficients. Thus the limitation and usage range of sharp crested weirs are clarified. In this research OpenFOAM open source 3D software with RNG K-ε turbulence model and Volume of Fluid method (VOF) was used to analyze the hydraulic flow passing through sharp crested weir. The correlation coefficient for flow Surface profiles and discharge coefficients among numerical and experimental data is obtained 0.96 for different discharge rates. In the present research, discharge coefficients for rectangular weirs with compression coefficient 0%, trapezoidal and triangular weirs are determined 1.20, 0.68 and 0.51 respectively using discharge rate of 0.05183m3/s. The maximum discharge coefficient is obtained for rectangular sharp crested weir while the triangular sharp crested weir has minimum discharge coefficient.

Three-Dimensional Simulation of Flow Over Sharp-Crested Weirs Using Volume of Fluid Method

Department of Civil Engineering, Urmia Branch

Faculty of Engineering, Department of Civil Engineering

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In sharp crested weirs, significant changes occur in the hydraulic characteristics of the flow past the weirs with different geometry. A detailed investigation...

Three-Dimensional Simulation of Flow Over Sharp-Crested Weirs Using Volume of Fluid Method

Publicado en línea: 05 jun 2020

Páginas: 75 - 82

Recibido: 21 ene 2020

Aceptado: 03 feb 2020

DOI: https://doi.org/10.2478/jaes-2020-0012

Palabras clave
Numerical model, VOF Method, K-ε turbulence model, OpenFOAM

© 2020 Shiva Rezazadeh et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Three-Dimensional Simulation of Flow Over Sharp-Crested Weirs Using Volume of Fluid Method

Publicado en línea: 05 jun 2020

Páginas: 75 - 82

Recibido: 21 ene 2020

Aceptado: 03 feb 2020

DOI: https://doi.org/10.2478/jaes-2020-0012

Palabras claveNumerical model, VOF Method, K-ε turbulence model, OpenFOAM

© 2020 Shiva Rezazadeh et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Numerical model, VOF Method, K-ε turbulence model, OpenFOAM