Acceso abierto

Crack Propagation Tests for Load Sequences Developed Using Different Flight Parameters of a Trainer Aircraft

Piotr Reymer

Piotr Reymer

  • Air Force Institute of TechnologyWarsaw, Poland
  • Military University of TechnologyWarsaw, Poland
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Reymer, Piotr
, 
Kamil Kowalczyk

Kamil Kowalczyk

Air Force Institute of TechnologyWarsaw, Poland
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Kowalczyk, Kamil
, 
Marta Baran

Marta Baran

Air Force Institute of TechnologyWarsaw, Poland
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Baran, Marta
, 
Dominik Nowakowski

Dominik Nowakowski

Air Force Institute of TechnologyWarsaw, Poland
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Nowakowski, Dominik
, 
Michał Dziendzikowski

Michał Dziendzikowski

Air Force Institute of TechnologyWarsaw, Poland
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Dziendzikowski, Michał
 y 
Andrzej Leski

Andrzej Leski

  • Military University of TechnologyWarsaw, Poland
  • Lukasiewicz Research Network – Institute of AviationWarsaw, Poland
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Leski, Andrzej
  
28 oct 2024
Crack Propagation Tests for Load Sequences Developed Using Different Flight Parameters of a Trainer Aircraft's Cover Image
Acerca de este artículo
Artículo anterior
Artículo siguiente
Cite
Descargar portada
Categoría del artículo: Research Article
Publicado en línea: 28 oct 2024
Páginas: 155 - 165
DOI: https://doi.org/10.2478/fas-2023-0010
Palabras clave
© 2023 Piotr Reymer et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Figure 1.

Location of strain gauges during the OLM and the SLM14 sensor
Location of strain gauges during the OLM and the SLM14 sensor

Figure 2.

Technical drawing of the CT samples used in the test and the mount
Technical drawing of the CT samples used in the test and the mount

Figure 3.

Test specimen mounted in the test stand, shown during (with a COD gauge) and after the test.
Test specimen mounted in the test stand, shown during (with a COD gauge) and after the test.

Figure 4.

Crack propagation curves obtained for different load spectra
Crack propagation curves obtained for different load spectra

Linear regression model parameters for the SLMX14 equations using flight parameters

Independent variables R R2 free coefficient a b c
nz 0.9320 0.8686 -64.1018 388.8242 - -
nz, Hb 0.9459 0.8947 -113.747 368.296 0.046 -
nz, Hb, Vp 0.9742 0.9491 -231.156 332.524 0.032 0.726

Correlation matrix for the available flight parameters

Variable SLMX14 nz Hb VP dh dkl dl dv
SLMX14 1.00 0.93 0.43 0.61 0.37 -0.30 -0.03 -0.07
nz 0.93 1.00 0.29 0.39 0.28 -0.14 -0.08 -0.03
Hb 0.43 0.29 1.00 0.30 0.42 -0.49 0.09 0.17
VP 0.61 0.39 0.30 1.00 0.22 -0.46 -0.08 -0.15
dh 0.37 0.28 0.42 0.22 1.00 0.08 -0.04 0.22
dkl -0.30 -0.14 -0.49 -0.46 0.08 1.00 -0.00 0.15
dl -0.03 -0.08 0.09 -0.08 -0.04 -0.00 1.00 -0.15
dv -0.07 -0.03 0.17 -0.15 0.22 0.15 -0.15 1.00

Load sequence characteristics

Sequence SLMX14 nz nz+Hb nz+Hb + Vp
Number of cycles 52894 30434 28241 25348
SFH 270.6 266.7 267.7 271

Dimensions of the CT specimens used in the test

W [mm] B [mm] Width [mm] Height [mm] Holes [fi_mm] Notch [mm] CS [mm2] Precrack [mm] H [mm]
48 8 60 57.6 12 21.6 307.2 1 3
Idioma:
Inglés
Calendario de la edición:
1 veces al año
Temas de la revista:
Ingeniería, Introducciones y reseñas, Ingeniería, otros
RSS Feed de revista