This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
ANSI. (1998). Single cantilever beam method for measuring the dynamic mechanical properties of viscoelastic materials. (S2.23-1998).ANSI. (1998).. (S2.23-1998).Search in Google Scholar
ASTM. (1998). Test method for measuring vibration-damping properties of materials (E756-98).ASTM. (1998).(E756-98).Search in Google Scholar
Braun, S., Ewins, D. J., & Rao, S. S. (2002). Encyclopedia of vibration. (G. Simon, Ed.). Academic Press.BraunS.EwinsD. J., & RaoS. S.(2002).. (SimonG., Ed.).Academic Press.Search in Google Scholar
Brown, W. G. (1981). Determination of damping values for turbine blades. Proceedings of the Design Engineering Technical Conference, Article ASME Paper 81-DET-131.BrownW. G.(1981)..Proceedings of the Design Engineering Technical Conference, Article ASME Paper 81-DET-131.Search in Google Scholar
Csaba, G. (1998). Modelling microslip friction damping and its influence on turbine blade vibrations [PhD dissertation, Linköping University]. http://urn.kb.se/resolve? urn=urn:nbn:se:liu:diva-181151CsabaG.(1998).[PhD dissertation, Linköping University].http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-181151Search in Google Scholar
Csaba, G. & Andersson, M. (1997). Optimization of friction damper weight, simulation and experiments, presented at the ASME TurboExpo 97, Orlando, FL, 97-GT-115, 2-5 June, 1997.CsabaG. & AnderssonM.(1997)..Search in Google Scholar
Deutsches Institut fuer Normung. (1971). Biegeschwingungsversuch. Bestimmung von kenngroessen schwingungsgeda empfter mehrschichtsysteme (Flexural vibration test. Determination of parameters of vibration-damped multi-layer systems) (DIN Standard 53 440).Deutsches Institut fuer Normung. (1971).(DIN Standard 53 440).Search in Google Scholar
Director of Flight Safety. (2014). Canadian forces flight safety investigation report (CT155201). DND.Director of Flight Safety. (2014)..Search in Google Scholar
Hanson, M. P. (1956). A vibration damper for axial-flow compressor blading. Procedings of the Society for Experimental Stress Analysis, XIV.HansonM. P.(1956).A vibration damper for axial-flow compressor blading..Search in Google Scholar
Hanson, M. P., Mayer, A. J., & Manson, S. S. (1953). A method of evaluating looseblade mounting as a means of suppressing turbine and compressor blade vibration. Proceedings SESA, 10(2).HansonM. P.MayerA. J., & MansonS. S.(1953).A method of evaluating looseblade mounting as a means of suppressing turbine and compressor blade vibration.,10(2).Search in Google Scholar
ISO. (1991). Damping materials: Graphic presentation of complex modulus (ISO 10112:1991).ISO. (1991)..Search in Google Scholar
Jachimowicz, J., Karliński, W., & Szachnowski, W. (2000). Blade and disc in-lock co-operation – selected problems. Machine Dynamics Problems, 4(24), 71–86.JachimowiczJ.KarlińskiW., & SzachnowskiW.(2000).Blade and disc in-lock co-operation – selected problems.,4(24),71–86.Search in Google Scholar
Jachimowicz, J., Kozłowski, P., Moneta, G., Szymczyk, E., & Kaniowski, J. (2011). Zjawisko frettingu w konstrukcjach lotniczych. Prace Instytutu Lotnictwa, 206, 36–58.JachimowiczJ.KozłowskiP.MonetaG.SzymczykE., & KaniowskiJ.(2011).Zjawisko frettingu w konstrukcjach lotniczych.,206,36–58.Search in Google Scholar
Jones, D. I. G., Nashif, A. D., & Stargardter, H. (1975). Vibrating beam dampers for reducing vibrations in gas turbine blades. Transactions of the ASME, Journal of Engineering for Power, 111–116.JonesD. I. G.NashifA. D., & StargardterH.(1975).Vibrating beam dampers for reducing vibrations in gas turbine blades.,111–116.Search in Google Scholar
Kielb, J. J., & Abhari, R. S. (2001). Experimental study of aerodynamic and structural damping in a full-scale rotating turbine. ASME Turbo Expo 2001, Article 2001-GT-0262. https://doi.org/10.1115/2001-GT-0262.KielbJ. J., & AbhariR. S.(2001).Experimental study of aerodynamic and structural damping in a full-scale rotating turbine.,Article 2001-GT-0262. https://doi.org/10.1115/2001-GT-0262.Open DOISearch in Google Scholar
Klepacki, W. (1975). Nieklasyczne zagadnienia drgań łopatek turbin lotniczych [Unpublished PhD dissertation]. Instytut Lotnictwa.KlepackiW.(1975)..Instytut Lotnictwa.Search in Google Scholar
Klepacki, W. (1978). O pewnej metodzie zmniejszania drgań łopatek turbin lotniczych. Prace Instytutu Lotnictwa, 74, 11–40.KlepackiW.(1978).O pewnej metodzie zmniejszania drgań łopatek turbin lotniczych.,74,11–40.Search in Google Scholar
Laborenz, J. (2014). Eddy current damping concept for last stage steel blading, 19th Blade Mechanics Seminar. Winterthur.LaborenzJ.(2014)..Winterthur.Search in Google Scholar
Lampert, P., Szymaniak, M., & Rzadkowski, R. (2004). Unsteady load of partial admission control stage rotor of a large power steam turbine. Proceedings of the ASME Turbo Expo 2004: Power for Land, Sea, and Air, Volume 5: Turbo Expo 2004, Parts A and B, Article ASME Paper GT2004-53886. https://doi.org/10.1115/GT2004-53886LampertP.SzymaniakM., & RzadkowskiR.(2004).Unsteady load of partial admission control stage rotor of a large power steam turbine.,Article ASME Paper GT2004-53886. https://doi.org/10.1115/GT2004-53886Open DOISearch in Google Scholar
Lazan, B. J. (1968). Damping of materials and members in structural mechanics. Pergamon Press.LazanB. J.(1968)..Pergamon Press.Search in Google Scholar
Moneta, G. (2019). Damping optimization of turbine blade vibration [Unpublished PhD dissertation]. Warsaw University of technology.MonetaG.(2019)..Warsaw University of technology.Search in Google Scholar
Moneta, G., Fedasz, M., Szmidt, M., Cieslak, M., & Krzymien, W. (2022). Advantages of additive manufacturing technology in damping improvement of turbine blading. Proceedings of the 2022 International Additive Manufacturing Conference. 2022 International Additive Manufacturing Conference, Article IAM2022-96752. https://doi.org/10.1115/IAM2022-96752.MonetaG.FedaszM.SzmidtM.CieslakM., & KrzymienW.(2022)..Proceedings of the 2022 International Additive Manufacturing Conference. 2022 International Additive Manufacturing Conference, Article IAM2022-96752. https://doi.org/10.1115/IAM2022-96752.Open DOISearch in Google Scholar
Moneta, G., Fedasz, M., Szmidt, M., Cieslak, S., & Krzymien, W. (2022). Increasing of damping in the turbine blade through multi-functional design and advantages of additive manufacturing technology. Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, Volume 8A: Structures and Dynamics — Aerodynamics Excitation and Damping; Bearing and Seal Dynamics, Article GT2022-83889. https://doi.org/10.1115/GT2022-83889.MonetaG.FedaszM.SzmidtM.CieslakS., & KrzymienW.(2022)..Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, Volume 8A: Structures and Dynamics — Aerodynamics Excitation and Damping; Bearing and Seal Dynamics, Article GT2022-83889. https://doi.org/10.1115/GT2022-83889.Open DOISearch in Google Scholar
Moneta, G., Jachimowicz, J., Pietrzakowski, M., Doligajski, A., & Szwedowicz, J. (2021). Insight into vibration sources in turbines. Fatigue of Aircraft Structures, 2021(13), 40–53. https://doi.org/10.2478/fas-2021-0005.MonetaG.JachimowiczJ.PietrzakowskiM.DoligajskiA., & SzwedowiczJ.(2021).Insight into vibration sources in turbines.,2021(13),40–53. https://doi.org/10.2478/fas-2021-0005.Open DOISearch in Google Scholar
Pastorius, W. J. (1969). Damping factors in turbine blade vibration (Publication No. 6580) [Electronic Theses and Dissertations, University of Windsor]. https://scholar.uwindsor.ca/etd/6580PastoriusW. J.(1969).(Publication No. 6580)[Electronic Theses and Dissertations, University of Windsor].https://scholar.uwindsor.ca/etd/6580Search in Google Scholar
Rao, J. S. (2011). History of mechanism and machine science. Volume 20. Springer.RaoJ. S.(2011)..Volume20.Springer.Search in Google Scholar
Salzmann, D.J.C. & van der Tempel, J. (2005). Aerodynamic damping in the design of support structures for offshore wind turbines. Offshore Wind Energy Conference, Copenhagen, Dennmark, 26-28 October, 2005.SalzmannD.J.C. & van der TempelJ.(2005)..Offshore Wind Energy Conference,Copenhagen, Dennmark,26-28 October, 2005.Search in Google Scholar
Schmid, R. (1962). Resonanzverhalten und Schwingungssicherheit der Schaufeln von Turbomaschinen. Maschinenbautechnik, 11(Heft 12).SchmidR.(1962).Resonanzverhalten und Schwingungssicherheit der Schaufeln von Turbomaschinen.,11(Heft 12).Search in Google Scholar
Scott-Emuakpor, O., Beck, J., Runyon, B., & George, T. (2021). Determining unfused powder threshold for optimal inherent damping with additive manufacturing. Additive Manufacturing, 38, 101739. https://doi.org/10.1016/j.addma.2020.101739.Scott-EmuakporO.BeckJ.RunyonB., & GeorgeT.(2021).Determining unfused powder threshold for optimal inherent damping with additive manufacturing.,38,101739. https://doi.org/10.1016/j.addma.2020.101739.Open DOISearch in Google Scholar
Srinivasan, A. V. (1997). Flutter and resonant vibration characteristics of engine blades: An IGTI scholar paper. Proceedings of the ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition, Volume 4: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagn, Article 97-GT-533. https://doi.org/10.1115/97-GT-533.SrinivasanA. V.(1997)..Proceedings of the ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition, Volume 4: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagn, Article 97-GT-533. https://doi.org/10.1115/97-GT-533.Open DOISearch in Google Scholar
Szwedowicz, J. (2012). Bladed disks: Non-linear dynamics, structural design of aircraft engines. Article RTO-AVT-207-09.SzwedowiczJ.(2012).. Article RTO-AVT-207-09.Search in Google Scholar
Szwedowicz, J., Secall-Wimmel, T., & Dünck-Kerst, P. (2008). Damping performance of axial turbine stages with loosely assembled friction bolts: The nonlinear dynamic assessment. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 130, Article 032505.SzwedowiczJ.Secall-WimmelT., & Dünck-KerstP.(2008).Damping performance of axial turbine stages with loosely assembled friction bolts: The nonlinear dynamic assessment.,130, Article 032505.Search in Google Scholar
Wdowiński, W., Szymczyk, E., Jachimowicz, J., & Moneta, G. (2017). Design and strength analysis of curved-root concept for compressor rotor blade in gas turbine. Fatigue of Aircraft Structures, 2017(9), 137–155. https://doi.org/10.1515/fas-2017-0011.WdowińskiW.SzymczykE.JachimowiczJ., & MonetaG.(2017).Design and strength analysis of curved-root concept for compressor rotor blade in gas turbine.,2017(9),137–155. https://doi.org/10.1515/fas-2017-0011.Open DOISearch in Google Scholar