This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Åkesson, J. (2008). Optimica - An Extension of Modelica Supporting Dynamic Optimization. Paper presented at 6th International Modelica Conference, Bielefeld, Germany, 57–66. Retrieved from https://portal.research.lu.se/portal/files/6062979/8253707.pdfÅkessonJ.2008Optimica - An Extension of Modelica Supporting Dynamic OptimizationPaper presented at 6th International Modelica ConferenceBielefeld, Germany5766Retrieved from https://portal.research.lu.se/portal/files/6062979/8253707.pdfSearch in Google Scholar
Al-Ahmari, A., Abidi, M., Ahmad, A., & Darmoul, S. (2016). Development of a virtual manufacturing assembly simulation system. Advances in Mechanical Engineering, 8(3), 1–13. doi: 10.1177/1687814016639824.Al-AhmariA.AbidiM.AhmadA.DarmoulS.2016Development of a virtual manufacturing assembly simulation systemAdvances in Mechanical Engineering8311310.1177/1687814016639824Open DOISearch in Google Scholar
Briesemeister, R., & Novaes, À. (2017). Comparing an approximate queuing approach with simulation for the solution of a cross-docking problem. Journal of Applied Mathematics, 6, 1–11. doi: 10.1155/2017/4987127BriesemeisterR.NovaesÀ.2017Comparing an approximate queuing approach with simulation for the solution of a cross-docking problemJournal of Applied Mathematics611110.1155/2017/4987127Open DOISearch in Google Scholar
Bronstein, I. N., & Semendiaiev, K. A. (1986). Guide on mathematics for engineers and students of higher education establishments. Moscow, Russia: Nauka.BronsteinI. N.SemendiaievK. A.1986Guide on mathematics for engineers and students of higher education establishmentsMoscow, RussiaNaukaSearch in Google Scholar
Dmytriv, V., Dmytriv, I., Lavryk, Y., & Horodeckyy, I. (2018). Models of adaptation of the milking machines systems. Contemporary Research Trends in Agricultural Engineering. BIO Web of Conferences, 10, 02004. doi:10.1051/bioconf/20181002004DmytrivV.DmytrivI.LavrykY.HorodeckyyI.2018Models of adaptation of the milking machines systems. Contemporary Research Trends in Agricultural EngineeringBIO Web of Conferences100200410.1051/bioconf/20181002004Open DOISearch in Google Scholar
Gálová, K., Rajnoha, R., & Ondra, P. (2018). The Use Of Industrial Lean Management Methods In The Economics Practice: An Empirical Study Of The Production Companies In The Czech Republic. Polish Journal of Management Studies, 17(1), 93–104.GálováK.RajnohaR.OndraP.2018The Use Of Industrial Lean Management Methods In The Economics Practice: An Empirical Study Of The Production Companies In The Czech RepublicPolish Journal of Management Studies1719310410.17512/pjms.2018.17.1.08Search in Google Scholar
García, S. G., & García, M. G. (2018). Design and Simulation of Production and Maintenance Management Applying the Viable System Model: The Case of an OEM Plant. Materials, 11, 1346. doi:10.3390/ma11081346GarcíaS. G.GarcíaM. G.2018Design and Simulation of Production and Maintenance Management Applying the Viable System Model: The Case of an OEM PlantMaterials11134610.3390/ma11081346611988630081454Open DOISearch in Google Scholar
Ivanov, D. (2017). Operations and supply chain simulation with AnyLogic. Decision-oriented introductory notes for master students. Berlin School of Economics and Law. Retrieved from https://www.anylogic.com/upload/pdf/Ivanov_AL_book_2017.pdfIvanovD.2017Operations and supply chain simulation with AnyLogicDecision-oriented introductory notes for master students. Berlin School of Economics and Law. Retrieved from https://www.anylogic.com/upload/pdf/Ivanov_AL_book_2017.pdfSearch in Google Scholar
Kibira, D., & Shao, G. (2016). Virtual Factory Framework for Supporting Production Planning and Control. Conference Paper in IFIP Advances in Information and Communication Technology. doi: 10.1007/978-3-319-51133-7_35KibiraD.ShaoG.2016Virtual Factory Framework for Supporting Production Planning and ControlConference Paper in IFIP Advances in Information and Communication Technology10.1007/978-3-319-51133-7_35555729828819462Open DOISearch in Google Scholar
Kikolski M. & Ko C-H. (2018). Facility layout design – review of current research directions. Engineering Management in Production and Services, 10(3), 70–79. doi: 10.2478/emj-2018-0018KikolskiM.KoC-H.2018Facility layout design – review of current research directionsEngineering Management in Production and Services103707910.2478/emj-2018-0018Open DOISearch in Google Scholar
Kodra, Yu. V., Stotsko, Z. A., & Havrylchenko, O. V. (2008). Loading devices of technological machines. Calculation and construction. Manual. Lviv, Ukraine: Publishing house “Beskyd Bit”.KodraYu. V.StotskoZ. A.HavrylchenkoO. V.2008Loading devices of technological machines. Calculation and construction. ManualLviv, UkrainePublishing house “Beskyd Bit”Search in Google Scholar
Mourtzis, D. (2019). Simulation in the design and operation of manufacturing systems: state of the art and new trends. International Journal of Production Research, 58(7), 1927–1949. doi: 10.1080/00207543.2019.1636321MourtzisD.2019Simulation in the design and operation of manufacturing systems: state of the art and new trendsInternational Journal of Production Research5871927194910.1080/00207543.2019.1636321Open DOISearch in Google Scholar
Mourtzis, D., Papakostas, N., Mavrikios, D., Makris, S., & Alexopoulos, K. (2015). The Role of Simulation In Digital Manufacturing – Applications And Outlook. International Journal of Computer Integrated Manufacturing, 28(1), 3–24. doi: 10.1080/0951192X.2013.800234MourtzisD.PapakostasN.MavrikiosD.MakrisS.AlexopoulosK.2015The Role of Simulation In Digital Manufacturing – Applications And OutlookInternational Journal of Computer Integrated Manufacturing28132410.1080/0951192X.2013.800234Open DOISearch in Google Scholar
Rahman, Ch., & Ullah, S. (2015). Process Flow Improvement Proposal of a Batch Manufacturing System Using ARENA Simulation Modeling. Review of General Management, 21(1), 63–77.RahmanCh.UllahS.2015Process Flow Improvement Proposal of a Batch Manufacturing System Using ARENA Simulation ModelingReview of General Management2116377Search in Google Scholar
Ran, L., Xiaolei, X., Kaiye, Y., & Qiaoyu, H. (2018). A survey on simulation optimization for the manufacturing system operation. International Journal of Modelling and Simulation, 38(2), 116–127. doi: 10.1080/02286203.2017.1401418RanL.XiaoleiX.KaiyeY.QiaoyuH.2018A survey on simulation optimization for the manufacturing system operationInternational Journal of Modelling and Simulation38211612710.1080/02286203.2017.1401418Open DOISearch in Google Scholar
Shao, G., Brodsky, A., Shin, S.-J., & Kim, D. B. (2014). Decision guidance methodology for sustainable manufacturing using process analytics formalism. Journal of Intelligent Manufacturing, 28(2), 455–472. doi: 10.1007/s10845-014-0995-3ShaoG.BrodskyA.ShinS.-J.KimD. B.2014Decision guidance methodology for sustainable manufacturing using process analytics formalismJournal of Intelligent Manufacturing28245547210.1007/s10845-014-0995-3Open DOISearch in Google Scholar
Sobolewski, J. (red.), Sieminski, P., & Sobieszczanski, J. (2012). Technologies of production and projection of technological processes. Warsaw, Poland: Politechnika Warszawska.SobolewskiJ.(red.)SieminskiP.SobieszczanskiJ.2012Technologies of production and projection of technological processesWarsaw, PolandPolitechnika WarszawskaSearch in Google Scholar
Sujová, E., Cierna, H., & Bambura, R. (2019). Simulation model of production as tool for industry 4.0 implementation into practice. 18-th International Scientific Conference Engineering for Rural Development. doi: 10.22616/ERDev2019.18.N279SujováE.CiernaH.BamburaR.2019Simulation model of production as tool for industry 4.0 implementation into practice18-th International Scientific Conference Engineering for Rural Development10.22616/ERDev2019.18.N279Open DOISearch in Google Scholar
Tkaczyk, S., & Roszak, M. (2002). Analysis of the technological process based on the added value criterion. 11 International Conference AMME’2002, Gliwice-Zakopane. Retrieved from http://www.journalamme.org/papers_amme02/11121.pdfTkaczykS.RoszakM.2002Analysis of the technological process based on the added value criterion11 International Conference AMME’2002, Gliwice-ZakopaneRetrieved from http://www.journalamme.org/papers_amme02/11121.pdfSearch in Google Scholar
Wędrychowicz, M., & Bydałek, A. (2017). Optimization of the production process of “Glogow II” melting with application of technological supplement CaF2. Methods and Instruments of Production Technique, 2, 123–132.WędrychowiczM.BydałekA.2017Optimization of the production process of “Glogow II” melting with application of technological supplement CaF2Methods and Instruments of Production Technique2123132Search in Google Scholar
Zwierzyński, P., & Ahmad, H. (2018). Seru production as an alternative to a traditional assembly line. Engineering Management in Production and Services, 10(3), 62–69. doi: 10.2478/emj-2018-0017ZwierzyńskiP.AhmadH.2018Seru production as an alternative to a traditional assembly lineEngineering Management in Production and Services103626910.2478/emj-2018-0017Open DOISearch in Google Scholar
