Mechanical Properties the Al-7%SiMg Alloy with CuAl10Fe3Mn2 Used in Machine Building and Civil Engineering

Bolibruchová, D., Richtárech, L., 2013. Effect of adding iron to the AlSi7Mg0.3 (EN AC 42 100,A356) alloy. Manufacturing Technology 13(3), 276-281.10.21062/ujep/x.2013/a/1213-2489/MT/13/3/276Search in Google Scholar

Bolibruchová, D., Richtárech, L., 2016, Possibilities of Using Al-Si-Mg Alloys with Higher Fe Content for Demanding Castings. Manufacturing Technology 16(2), 317-323.10.21062/ujep/x.2016/a/1213-2489/MT/16/2/317Search in Google Scholar

Borkowski, S., Ulewicz, R., Selejdak, J., Konstanciak, M., Klimecka-Tatar, D., 2012. The use of 3x3 matrix to evaluation of ribbed wire manufacturing technology. 21st Int. Conf. on Metallurgy and Materials. Ostrava: TANGER, 1722-1728.Search in Google Scholar

Braszczyński J., 1991, Krystalizacja odlewów. WNT Warszawa.Search in Google Scholar

Bruna, M., Sládek, A., 2016, Hot Tearing Evaluation of Al Based Alloys. Manufacturing Technology 16(2), 323-327.10.21062/ujep/x.2016/a/1213-2489/MT/16/2/323Search in Google Scholar

Chrostek, T., 2016. Thermalanalysis of aluminum bronze BA1032. Technical Sciences 19(4), 359–366.Search in Google Scholar

Cook, R., 2008. Modification of Aluminium-Silicon Foundry Alloys. London & Scandinavian Metallurgical Co Limited.Search in Google Scholar

Dudek, A., Lisiecka, B., 2017. The effect of thermal oxidation of porous and non-porous titanium alloy. Metal 2017: 26th International Conference on Metallurgy and Materials. TANGER Ltd 1234-1239.Search in Google Scholar

EN ISO 6892-1:2016. Metallic materials. Tensile testing Part 1: Method of test at room temperature.Search in Google Scholar

EN ISO6506-1:2014. Metallic materials -- Brinell hardness test Part 1: Test method.Search in Google Scholar

Fisher, D.J., Kurz, W., 1977. Coupled zones in faced/nonfaced eutectics. Solidification and casting of metals. International conference on solidification. Sheffield.Search in Google Scholar

Góral, A., Jura, J., Bouzy, E., Sztwiertnia, K., Morgiel, J., Bonarski, J., 2006. Multiscale texture and orientation relationship investigation in Al-CuAl2 eutectic alloy, Archives of Metallurgy and Materials 51, 11-14.Search in Google Scholar

Hajek, J., Kriz, A., Hrydlicka, V., 2015. The heat treatment of aluminium bronzes. Manufacturing Technology 15(1), 35-41.10.21062/ujep/x.2015/a/1213-2489/MT/15/1/35Search in Google Scholar

Hao, Y., Gao, B., Tu, G.F., Li, S.W., Hao, S.Z., Dong, C., 2011. Surface modification of Al– 20Si alloy by high current pulsed electron beam. Applied Surface Science 257, 3913–3919.10.1016/j.apsusc.2010.11.118Search in Google Scholar

Kusmierczak, S., Müller, M. Lebedev, A., 2017. Evaluation of aluminium alloy surface machined by means of abrasive-free ultrasonic finishing. In 16th International Scientific Conference: Engineering For Rural Development 24.05.2017, Latvia Univ Agriculture, Faculty Engineering 167-174.Search in Google Scholar

Lipiński, T., 2008. Modification of Al-Si alloys with the use of a homogenous modifiers. Archives of Metallurgy and Materials 53(1), 193-197.Search in Google Scholar

Lipiński, T., 2008. Influence exothermical mixtures contents Na or B on elongation and hardness AlSi12 alloy. Archives of Foundry Engineering 8(1), 81-84.Search in Google Scholar

Lipiński, T., 2010. The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier. Solid State Phenomena 163, 183-186.10.4028/www.scientific.net/SSP.163.183Search in Google Scholar

Lipiński, T., 2011. Use Properties of the AlSi9Mg Alloy with Exothermical Modifier. Manufacturing Technology 11(11), 44-49.10.21062/ujep/x.2011/a/1213-2489/MT/11/1/44Search in Google Scholar

Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Archives of Metallurgy and Materials 60(3), 2415-2419.10.1515/amm-2015-0394Search in Google Scholar

Lipiński, T., 2015. Modification of Al-11% Si Alloy with Cl – Based Modifier. Manufacturing Technology 15(4), 581-587.10.21062/ujep/x.2015/a/1213-2489/MT/15/4/581Search in Google Scholar

Lipiński, T., 2015. Influence of Surface Refinement on Microstructure of Al-Si Cast Alloys Processed by Welding Method. Manufacturing Technology 15(4), 576-581,10.21062/ujep/x.2015/a/1213-2489/MT/15/4/576Search in Google Scholar

Lipinski, T., Szabracki, P., 2013. Modification of the Hypo-Eutectic Al-Si Alloys with an Exothermic Modifier. Archives of Metallurgy and Materials 58(2), 453-458.10.2478/amm-2013-0017Search in Google Scholar

Michna, S., Lukac, I., Ocenasek, V., Koreny, R., Drapala, J., Schneider, H., Miskufova, A., 2005. Encyclopaedia of aluminium, Adin s.r.o. Presov. (in Czech).Search in Google Scholar

Mondelfo, L.F., 1976. Aluminium alloys. Structure and properties. Butter Wooths. London Boston.Search in Google Scholar

Náprstková, N., Cais, J., Stančeková, D., 2014. Influence of Alsi7Mg0.3 Alloy Modification by Sb on the Tool Wear. Manufacturing Technology 14(1), 75-7910.21062/ujep/x.2014/a/1213-2489/MT/14/1/75Search in Google Scholar

Náprstková, N., Kuśmierczak, S., Cais, J., 2013. Modification of AlSi7Mg0.3 alloy by strontium. Manufacturing Technology 13(3), 373-380.10.21062/ujep/x.2013/a/1213-2489/MT/13/3/373Search in Google Scholar

Nová, I., Machuta, J., 2013. Squeeze casting results of aluminium alloys. Manufacturing Technology 13(1), 73-79.10.21062/ujep/x.2013/a/1213-2489/MT/13/1/73Search in Google Scholar

Novák, P., Šerák, J., Vojtěch, D., Zelinková, M., Mejzlíková, L., Michalcová, A., 2011. Effect of Alloying Elements on Microstructure and Properties of Fe-Al and Fe-Al-Si Alloys Produced by Reactive Sintering. Key Engineering Materials 465, 407-410.10.4028/www.scientific.net/KEM.465.407Search in Google Scholar

Osorio, W.R., Cheung, N., Spinelli, J.E., Cruz, K.S., Garcia, A., 2008. Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9 wt%Si casting alloy. Applied Surface Science 254, 2763–2770.10.1016/j.apsusc.2007.10.013Search in Google Scholar

Pilarczyk, W., 2015. The investigation of the structure of bulk metallic glasses before and after laser welding. Cryst. Res. Technol. 9-10, 700-704.10.1002/crat.201400438Search in Google Scholar

PN EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels.Search in Google Scholar

Raghavan, V., 2010. Al-Cu-Si (Aluminum-Copper-Silicon). J. Phase Equilib. Diffus. 31, 39–40.10.1007/s11669-009-9618-7Search in Google Scholar

Ruan, Y., Wei, B.B., 2009. Rapid solidification of undercooled Al-Cu-Si eutectic alloys. Chinese Sci. Bull. 54, 53–58.10.1007/s11434-008-0540-xSearch in Google Scholar

Stasiak-Betlejewska, R., Ulewicz, R., 2016. The effectiveness of selected machinery and equipment in the woodworking joinery. Path forward for wood products: a global perspective, proceedings of scientific papers 149-156.Search in Google Scholar

Styrylska, T., Pietraszek, J., 1992. Numerical modeling of non-steady-state temperature fields with supplementary data. ZAMM-Z. Angew. Math. Mech. 72, T537-T539.Search in Google Scholar

Ulewicz, R., Jelonek, D., Mazur, M., 2016, Implementation of logic flow in planning and production control. Management and Production Engineering Review 7, 89-94.10.1515/mper-2016-0010Search in Google Scholar

Ulewicz, R., Selejdak, J. Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry. Metal 2013: 22nd International Conference on Metallurgy and Materials. TANGER Ltd 1926-1931.Search in Google Scholar

Vandersluis, E., Ravindran, C., 2018. Relationships Between Solidification Parameters in A319 Aluminum Alloy. Journal of Materials Engineering and Performance 27(3), 1109-1121.10.1007/s11665-018-3184-2Search in Google Scholar

Vaněček, D. - Sokovic, M. - Mádl, J., 2003. Selected Aspects of the Surface Integrity of Aluminium Alloy in High Speed Machining - Microhardness Variations and Surface Roughness. Journal of Mechanical Engineering - Strojniški Vestnik. 49(2), 111-115.Search in Google Scholar

Villars, P., Prince, A., Okamoto, H., 1995, Al-Cu-Si, Handbook of Ternary Alloy Phase Diagrams, ASM International, Materials Park, OH, 3, p 3331-3351.Search in Google Scholar

Vitalii, B., Dudek, A., 2017. Evaluation of composite epoxy resin applicability for concrete coatings. Composites Theory and Practice 17(4), 221-225.Search in Google Scholar

Wojnar, L., Gadek-Moszczak, A., PIETRASZEK, J., 2019. On the role of histomorphometric (stereological) microstructure parameters in the prediction of vertebrae compression strength. Image Analysis and Stereology 38, 63-73.10.5566/ias.2028Search in Google Scholar

Wołczyński, W., Sypien, A., Tarasek, A., Bydałek, A.W., 2017. Copper Droplets Agglomeration / Coagulation In The Conditions Similar To Industrial Ones. Archives of Metallurgy And Materials 62(1), 299-306.10.1515/amm-2017-0043Search in Google Scholar