Assessing the Rheological Behavior of Bio-Asphalt Binder with Integrating Biowaste-Derived Activated Carbon

[1] AASHTO M 156 - Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures:Search in Google Scholar

[2] AGAMUTHU, P.: Challenges and opportunities in agro-waste management: An Asian perspective. In Inaugural meeting of first regional 3R forum in Asia (Vol. 11, p. 12). University of Malasiya. (2009, November).Search in Google Scholar

[3] ASTM D2872-22 “Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Search in Google Scholar

[4] ASTM D4402 – 06 ‘‘Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer”.Search in Google Scholar

[5] ASTM D7405-08 “Standard Test Method for Multiple Stress Creep Recovery (MSCR) Test”Search in Google Scholar

[6] ANI, O. J. - SHAFABAKHSH, G. - MOHAMMAD, S.: Investigation of Rheological Characteristics of Powdered AC Modified Binder for Use in Self-Healing Mechanism of Asphalt Concrete, 2024Search in Google Scholar

[7] BHAGAT, N. - HADOLE, H. - & RANADIVE, M.: Oxidative Aging Characterization of Pyro-Oil Modified Binders Using Fourier Transform Infrared Spectroscopy. Advances in Science and Technology Research Journal. https://doi.org/10.12913/22998624/159056, 2023Search in Google Scholar

[8] CHAALA, A. - ROY, C. - AIT-KADI, A.: Rheological properties of binder modified with pyrolytic carbon black. Fuel, 75, 1575-1583. https://doi.org/10.1016/0016-2361(96)00143-3, 1996Search in Google Scholar

[9] CHEBIL, S. - CHAALA, A. - ROY, C.: Use of softwood bark charcoal as a modifier for road binder. Fuel, 79, 671-683. https://doi.org/10.1016/S0016-2361(99)00196-9, 2000Search in Google Scholar

[10] DARE, P. - HEDAOO, N.: Assessment of Removal of Fines from Reclaimed Asphalt Binder Using Fourier Transform Infrared Spectroscopy. Advances in Science and Technology Research Journal. https://doi.org/10.12913/22998624/169059Search in Google Scholar

[11] DECKÝ, M. - PAPÁNOVÁ, Z. - JUHÁS, M. - KÚDELČÍKOVÁ, M.: Evaluation of the Effect of Average Annual Temperatures in Slovakia between 1971 and 2020 on Stresses in Rigid Pavements. Land. https://doi.org/10.3390/land11060764, 2020Search in Google Scholar

[12] Munad, F. – Supramono, D.: Activated Carbon Production Through Co-Pyrolysis of Vacuum Residue and Dehydrated Castor Oil. Materials Science Forum, 2020 doi: 10.4028/WWW.SCIENTIFIC.NET/MSF.988.73Open DOISearch in Google Scholar

[13] FENG, Z. - RAO, W. - CHONG, C. - TIAN, B. - LI, X. - PEILONG, L. - GUO, Q.: Performance evaluation of binder modified with pyrolysis carbon black made from waste tires. Construction and Building Materials, 111, 495-501. https://doi.org/10.1016/J.CONBUILDMAT.2016.02.143.Search in Google Scholar

[14] Firoozifar, S. - Foroutan, S. - Foroutan, S.: The effect of asphaltene on thermal properties of binder.Chemical Engineering Research & Design, 89, 2044-2048., 2016Search in Google Scholar

[15] IS 1203-2022, “The standard test method for penetration of bituminous materials.”Search in Google Scholar

[16] IS : 1208-2023, “The standard test method for determination of ductility of binder.”Search in Google Scholar

[17] IS 1209-2022, “The standard test method for softening point of binder (ring and-ball apparatus).”Search in Google Scholar

[18] IRC SP 53, “Guidelines on Use of Modified Binder in Road Construction.”Search in Google Scholar

[19] HUNG, J. J.: The Production of Activated Carbon from Coconut Shells Using Pyrolysis and Fluidized Bed Reactors, 2012Search in Google Scholar

[20] KUMAR, A. - CHOUDHARY, R. - NARZARI, R. - KATAKI, R. - SHUKLA, S.: Evaluation of bio-asphalt binders modified with biochar: a pyrolysis by-product of Mesua ferrea seed cover waste. Cogent Engineering, 5. https://doi.org/10.1080/23311916.2018.1548534, 2018Search in Google Scholar

[21] LEI, M. - WU, S. - LIU, G. - AMIRKHANIAN, S.: VOCs characteristics and their relation with rheological properties of base and modified binders at different temperatures. Construction and Building Materials, 160, 794-801. https://doi.org/10.1016/J.CONBUILDMAT.2017.12.158, 2018Search in Google Scholar

[22] LI, L. - YANG, Y. - GAO, Y. - ZHANG, Y.: Healing characterizations of waste-derived binder based on crack length: Laboratory and modeling. Journal of Cleaner Production, 316, 128269. https://doi.org/10.1016/J.JCLEPRO.2021.128269.Search in Google Scholar

[23] LIU, H. - ZEIADA, W. - AL-KHATEEB, G. - SHANABLEH, A. - SAMARAI, M.: The multiple stress creep recovery (MSCR) test is used to characterize the rutting potential of asphalt binders: A literature review. Construction and Building Materials, 121320, 2020Search in Google Scholar

[24] LOTFI-EGHLIM, A. - KARIMI, M.: Fatigue Behavior Of Hot Mix Asphalt Modified With Nano Al2o3 – An Experimental Study. Advances in Science and Technology Research Journal, 10, 58-63. https://doi.org/10.12913/22998624/64011, 2016Search in Google Scholar

[25] MoRTH (Ministry of Road Transport and Highways). (2013). “Manual for construction and supervision of bituminous works (fourth revision).” Indian Road Congress, New Delhi, IndiaSearch in Google Scholar

[26] OLADIMEJI, T. - ODUNOYE, B. - ELEHINAFE, F. - OBANLA, O. - ODUNLAMI, O.: Production of AC from sawdust and its efficiency in the treatment of sewage water. Heliyon, 7. https://doi.org/10.1016/j.heliyon.2021.e05960, 2021Search in Google Scholar

[27] PATIL, D. - HEDAOO, N.: Application of waste biaxially oriented polypropylene sandwiched graphene to enhance properties of asphalt mixes via a wet process. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.05.037Search in Google Scholar

[28] RUSUL, l, M. - DARWESH.: Modifying Iraqi Asphalt 40/50 Properties Using Saw Dust (SD) and Natural Rubber Latex. Al-Mustansiriyah Journal of Sciences, 28(2):173-178. doi: 10.23851/MJS.V28I2.514, 2018Open DOISearch in Google Scholar

[29] READ, J. - WHITEOAK, D.: Mechanical testing and properties of binder,’ in Shell Binder Handbook. 5^th ed, 119-156, 2003Search in Google Scholar

[30] SEYREK, E. - YALÇIN, E. - YILMAZ, M. - KÖK, B. - ARSLANOĞLU, H.: Effect of AC obtained from Vinasse and Marc on the rheological and mechanical characteristics of the binder binders and hot mix asphalts. Construction and Building Materials, 240, 117921. https://doi.org/10.1016/j.conbuildmat.2019.117921, 2020.Search in Google Scholar

[31] SHAHEEN, J. - YOHANNA, H. F. – BANU, S.: Performance, life cycle assessment, and economic comparison between date palm waste biochar and activated carbon derived from woody biomass.” Heliyon 8.12 2022.Search in Google Scholar

[32] SINGH, D. - & KATAWARE, A.: Comparison of different rheological parameters for rutting susceptibility of SBS + WMA modified binders. Innovative Infrastructure Solutions, 1, 1-10. https://doi.org/10.1007/s41062-016-0026-7, 2016.Search in Google Scholar

[33] SONI, B. - PATEL, U. - MISHRA, G. - KARMEE, S. K.: Sustainable valorization of sawdust via batch and continuous pyrolysis. Environmental Pollution & It is Control (EPIC-2019), 18-19, 2019.Search in Google Scholar

[34] VERNON-PARRY, K. D. (n.d.).: Scanning Electron Microscopy: An introduction. III-Vs review, Vol. 13. No 4, (2000), 40-44.Search in Google Scholar

[35] WANG, H. - LIU, X. - ERKENS, S. - & SKARPAS, A. (2020). Experimental characterization of storage stability of crumb rubber modified binder with warm-mix additives. Construction and Building Materials, 249, 118840. https://doi.org/10.1016/j.conbuildmat.2020.118840.Search in Google Scholar

[36] WANG, Y. - HONG, L. -LIU, Z. - SUN, L. - LIU, L.: Rheological Performance Evaluation of AC Powder Modified Asphalt Based on TOPSIS Method. Case Studies in Construction Materials, e02963, 2024Search in Google Scholar

[37] HUANG, Y. H.: Pavement analysis and design. 2nd ed. London: Pearson Education.Search in Google Scholar

[38] XIAO, Y. - WAN, M. - JENKINS, K. J. - WU, S. P. - CUI, P. Q.: “Using AC to Reduce the Volatile Organic Compounds from Bituminous Materials.” Journal of Materials in Civil Engineering, Vol. 29, Issue 10. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002024, 2017.Search in Google Scholar

[39] YAHYA, M. - AL-QODAH, Z. - NGAH, C.: Agricultural bio-waste materials as potential sustainable precursors used for AC production: A review. Renewable & Sustainable Energy Reviews, 46, 218-235. https://doi.org/10.1016/J.RSER.2015.02.051, 2015Search in Google Scholar

[40] YUNUS, Z. M. - YASHNI, G. - AL-GHEETHI, A. - OTHMAN, N. - HAMDAN, R. - RUSLAN, N. N.: Advanced methods for AC from agriculture wastes; a comprehensive review. In International Journal of Environmental Analytical Chemistry, Vol. 102, Issue 1, 134–158. https://doi.org/10.1080/03067319.2020.1717477, 2022Search in Google Scholar

[41] ZHAO, S. - HUANG, B. - YE, X. - SHU, X. - JIA, X.: Utilizing bio-char as a bio-modifier for asphalt cement: A sustainable application of bio -fuel by-product. Fuel, 133, 52-62. https://doi.org/10.1016/J.FUEL.2014.05.002, 2014.Search in Google Scholar

[42] Roberts, F. L. - Kandhal, P. S. - Brown, E. R. - Lee, D. Y. - Kennedy, T. W.: Hot Mix Asphalt Materials, Mixture Design and Construction, 2nd Edition, NAPA Research and Education Foundation. This textbook provides an overview of the properties and behavior of asphalt binders, including short-term aging, 1996Search in Google Scholar

[43] Activated Carbon Market, Industry Size Forecast Report, publish date, March 2024, report code is 4940. https://www.marketsandmarkets.com/Market-Reports/activated-carbon-362.htmlSearch in Google Scholar