<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The results of experimental research involving nine one-way slabs are detailed in this report. The objective was to investigate the impact of different parameters on the structural performance of these slabs in their absence and with strengthening. Externally bonded CFRP sheets strengthened six of the nine slabs; the three remaining slabs served as control specimens. Before subjecting the specimens to monotonic loading, pre-fatigue damage of 50% and 70% repeated loading was induced. An exhaustive assessment was conducted on each slab, in which it was compared to its control slab. Several crucial elements were incorporated into the evaluation, including the ultimate load capacity, the reason for failure, crack patterns, and load-deflection curves. Examining these metrics was intended to provide insight into the efficacy and structural performance of the employed fortification technology. Compared to unenhanced reinforced concrete slabs (control slab), the highest stresses on slabs supported with bonded CFRP sheets are between 20 and 44% better. Compared to the control slab, an almost 70% reduction in deflection was observed. The flexural performance of compromised reinforced concrete slabs repaired with this technology can be brought up to date and enhanced.</p>
</abstract>

The results of experimental research involving nine one-way slabs are detailed in this report. The objective was to investigate the impact of different parameters on the structural performance of these slabs in their absence and with strengthening. Externally bonded CFRP sheets strengthened six of the nine slabs; the three remaining slabs served as control specimens. Before subjecting the specimens to monotonic loading, pre-fatigue damage of 50% and 70% repeated loading was induced. An exhaustive assessment was conducted on each slab, in which it was compared to its control slab. Several crucial elements were incorporated into the evaluation, including the ultimate load capacity, the reason for failure, crack patterns, and load-deflection curves. Examining these metrics was intended to provide insight into the efficacy and structural performance of the employed fortification technology. Compared to unenhanced reinforced concrete slabs (control slab), the highest stresses on slabs supported with bonded CFRP sheets are between 20 and 44% better. Compared to the control slab, an almost 70% reduction in deflection was observed. The flexural performance of compromised reinforced concrete slabs repaired with this technology can be brought up to date and enhanced.

Behavior of Fatigue Damaged Reinforced Concrete One-Way Slabs Repaired With CFRP Sheets

M.Sc. Student, Dept. of Civil Engineering, College of Engineering

Assist. Prof., Ph.D., Dept. of Civil Engineering

College of Engineering, Al-Nahrain University

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

The results of experimental research involving nine one-way slabs are detailed in this report. The objective was to investigate the impact of different...

Behavior of Fatigue Damaged Reinforced Concrete One-Way Slabs Repaired With CFRP Sheets

Publicado en línea: 26 jun 2024

Páginas: 364 - 376

DOI: https://doi.org/10.2478/cee-2024-0028

Palabras clave
One-way slabs, CFRP sheet, Monotonic loading, Fatigue damage, Repairing;

© 2024 Mohammed O. Hameed et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Behavior of Fatigue Damaged Reinforced Concrete One-Way Slabs Repaired With CFRP Sheets

Publicado en línea: 26 jun 2024

Páginas: 364 - 376

DOI: https://doi.org/10.2478/cee-2024-0028

Palabras claveOne-way slabs, CFRP sheet, Monotonic loading, Fatigue damage, Repairing;

© 2024 Mohammed O. Hameed et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
One-way slabs, CFRP sheet, Monotonic loading, Fatigue damage, Repairing;