<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Research on the geometric tolerance control method of precision machinery based on image modeling and new saturation function. First, image-based modeling techniques provide a new way to control the saturation function with a dynamic boundary layer from a computer graphics perspective. Then, it proposes a method to represent the dimensional and geometric tolerances of precision machines using changes in the position of control points of geometric elements. Finally, the main content of the tolerance analysis method based on Monte Carlo simulation is proposed, that is, the position of the azimuth control point of all geometric elements on the measurement chain is determined experimentally by using a random number generator. Experiments have shown that the nominal distance between the control points is the nominal size of the geometric elements, and by comparing the variation of the control points with the nominal distance of the control points, it is easy to determine the relationship between tolerance and tolerance. accuracy.</p>
</abstract>

Research on the geometric tolerance control method of precision machinery based on image modeling and new saturation function. First, image-based modeling techniques provide a new way to control the saturation function with a dynamic boundary layer from a computer graphics perspective. Then, it proposes a method to represent the dimensional and geometric tolerances of precision machines using changes in the position of control points of geometric elements. Finally, the main content of the tolerance analysis method based on Monte Carlo simulation is proposed, that is, the position of the azimuth control point of all geometric elements on the measurement chain is determined experimentally by using a random number generator. Experiments have shown that the nominal distance between the control points is the nominal size of the geometric elements, and by comparing the variation of the control points with the nominal distance of the control points, it is easy to determine the relationship between tolerance and tolerance. accuracy.

Geometric Tolerance Control Method for Precision Machinery Based on Image Modeling and Novel Saturation Function

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

Research on the geometric tolerance control method of precision machinery based on image modeling and new saturation function. First, image-based modeling...

Geometric Tolerance Control Method for Precision Machinery Based on Image Modeling and Novel Saturation Function

Publicado en línea: 15 jul 2022

Páginas: 1455 - 1466

Recibido: 15 mar 2022

Aceptado: 24 may 2022

DOI: https://doi.org/10.2478/amns.2022.2.0134

Palabras clave
Image modeling, new saturation function, geometric tolerance, control point

© 2023 Yuanyuan Yue, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Figure 1

Geometric Tolerance Control Method for Precision Machinery Based on Image Modeling and Novel Saturation Function

Publicado en línea: 15 jul 2022

Páginas: 1455 - 1466

Recibido: 15 mar 2022

Aceptado: 24 may 2022

DOI: https://doi.org/10.2478/amns.2022.2.0134

Palabras claveImage modeling, new saturation function, geometric tolerance, control point

© 2023 Yuanyuan Yue, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Figure 1

Palabras clave
Image modeling, new saturation function, geometric tolerance, control point