<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the article the method of grinding with crossed axes of the tool and the workpiece got further developed. The work discloses a method of processing details having an external surface with a profile in the form of an arc of a circle of variable radius (for example, rolls of pipe rolling mills). The particular three-dimensional geometric models of the processing, shaping and profiling of abrasive wheels have been developed. A method for controlling the grinding process, which ensures the removal of allowances along equidistant curves has been offered. The developed method of grinding provides a constant depth of cutting according to the coordinate of profile processing. This is achieved at the expense of the synchronous inclination of the wheel and its insertion by the size of the allowance. The diameter of grinding wheel affects on the maximum angle of orientation of the wheel has been proven. It has been shown that increasing the diameter of the abrasive wheel has led to a slight decrease in value orientation angle.</p></abstract>

In the article the method of grinding with crossed axes of the tool and the workpiece got further developed. The work discloses a method of processing details having an external surface with a profile in the form of an arc of a circle of variable radius (for example, rolls of pipe rolling mills). The particular three-dimensional geometric models of the processing, shaping and profiling of abrasive wheels have been developed. A method for controlling the grinding process, which ensures the removal of allowances along equidistant curves has been offered. The developed method of grinding provides a constant depth of cutting according to the coordinate of profile processing. This is achieved at the expense of the synchronous inclination of the wheel and its insertion by the size of the allowance. The diameter of grinding wheel affects on the maximum angle of orientation of the wheel has been proven. It has been shown that increasing the diameter of the abrasive wheel has led to a slight decrease in value orientation angle.

Crossing Axes of Workpiece and Tool at Grinding of the Circular Trough with Variable Profile

Chernihiv National University of Technology

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

In the article the method of grinding with crossed axes of the tool and the workpiece got further developed. The work discloses a method of processing details...

Crossing Axes of Workpiece and Tool at Grinding of the Circular Trough with Variable Profile

Publicado en línea: 03 ene 2019

Páginas: 281 - 285

Recibido: 11 abr 2017

Aceptado: 11 dic 2018

DOI: https://doi.org/10.2478/ama-2018-0043

Palabras clave
Circular Trough, Grinding, Equidistant Curves, Cutting Edge, Abrasive Surface, Abrasive Materials, Crossed Axes, Abrasive Wheel, Orientation Angle, Grinding Performance

© 2018 Volodimyr Kalchenko et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Crossing Axes of Workpiece and Tool at Grinding of the Circular Trough with Variable Profile

Publicado en línea: 03 ene 2019

Páginas: 281 - 285

Recibido: 11 abr 2017

Aceptado: 11 dic 2018

DOI: https://doi.org/10.2478/ama-2018-0043

Palabras claveCircular Trough, Grinding, Equidistant Curves, Cutting Edge, Abrasive Surface, Abrasive Materials, Crossed Axes, Abrasive Wheel, Orientation Angle, Grinding Performance

© 2018 Volodimyr Kalchenko et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Palabras clave
Circular Trough, Grinding, Equidistant Curves, Cutting Edge, Abrasive Surface, Abrasive Materials, Crossed Axes, Abrasive Wheel, Orientation Angle, Grinding Performance