<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents research in the field of underwater wet cutting with the use of flux-cored wires in order to improve the quality and performance. The research has resulted into the development of gas and slag systems for flux-cored wires and determination of, optimal parameters for cutting stability and quality. The underwater wet cutting mechanism is a cyclical process with the formation of periodic keyholes in metal, and it consists of operating and idle cycles. Efficiency of the cutting process can be determined by analyzing cycle times, welding current, voltage, power and a number of short circuits. To assess the stability and efficiency of the underwater wet cutting process, the authors have developed the method for analyzing oscillograms to calculate the probability density of current, voltage and power. To determine the quality of cutting, the authors have provided a criterion based on the ratio of the voltage probability density in the idle and operating cycles.</p></abstract>

The paper presents research in the field of underwater wet cutting with the use of flux-cored wires in order to improve the quality and performance. The research has resulted into the development of gas and slag systems for flux-cored wires and determination of, optimal parameters for cutting stability and quality. The underwater wet cutting mechanism is a cyclical process with the formation of periodic keyholes in metal, and it consists of operating and idle cycles. Efficiency of the cutting process can be determined by analyzing cycle times, welding current, voltage, power and a number of short circuits. To assess the stability and efficiency of the underwater wet cutting process, the authors have developed the method for analyzing oscillograms to calculate the probability density of current, voltage and power. To determine the quality of cutting, the authors have provided a criterion based on the ratio of the voltage probability density in the idle and operating cycles.

Mathematical Analysis of the Influence of the Flux-Cored Wire Chemical Composition on the Electrical Parameters and Quality in the Underwater Wet Cutting

Peter the Great St. Petersburg Polytechnic University

Department of Underwater Welding and Technologies; Educational Scientific and Technical Center «Svarka»

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents research in the field of underwater wet cutting with the use of flux-cored wires in order to improve the quality and performance. The...

Mathematical Analysis of the Influence of the Flux-Cored Wire Chemical Composition on the Electrical Parameters and Quality in the Underwater Wet Cutting

Publicado en línea: 30 mar 2021

Páginas: 77 - 89

DOI: https://doi.org/10.2478/adms-2021-0006

Palabras clave
underwater wet cutting, flux-cored wire, mathematical analysis

© 2021 S. Parshin et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mathematical Analysis of the Influence of the Flux-Cored Wire Chemical Composition on the Electrical Parameters and Quality in the Underwater Wet Cutting

Publicado en línea: 30 mar 2021

Páginas: 77 - 89

DOI: https://doi.org/10.2478/adms-2021-0006

Palabras claveunderwater wet cutting, flux-cored wire, mathematical analysis

© 2021 S. Parshin et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
underwater wet cutting, flux-cored wire, mathematical analysis