The Effect of Welding Conditions on Mechanical Properties of Superduplex Stainless Steel Welded Joints
, y
25 abr 2014
Acerca de este artículo
Publicado en línea: 25 abr 2014
Páginas: 14 - 23
DOI: https://doi.org/10.2478/adms-2014-0002
Palabras clave
© by A. Świerczyńska
This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
The tests results of superduplex stainless steel welded joints made with a different heat input, using automatic submerged arc welding (SAW) and semi-automatic flux-cored arc welding (FCAW) have been presented. Metallographic examinations, the measurements of the ferrite content, the width of the heat affected zone (HAZ) and the hardness of the welds in characteristic areas have been performed. Significant differences in the amount of ferrite in the weld metal and in the heat affected zone microstructure of joints were found.