Study of the sensitivity and stability of a landslide sensor based on magnetic amorphous wires

[1]Tarchi, D., Casagli, N., Fanti, R., Leva, D.D., Luzi, G., Alessandro, P., Pieraccini, M., Silvano, S., Landslide monitoring by using ground-based SAR interferometry: an example of application to the Tessina landslide in Italy, Engineering Geology 68, 15– 30, 2003 Search in Google Scholar

[2]Corsini, A., Borgatti, L., Coren, F., and Vellico, M., Use of multitemporal airborne lidar surveys to analyse post-failure behaviour of earthslides, Canadian Journal of Remote Sensing, 33(2), 116-120, 2007 Search in Google Scholar

[3]Janet E. Nichol, Ahmed Shaker, Man-Sing Wong, Application of high- resolution stereo satellite images to detailed landslide hazard assessment, Geomorphology, 76, 68– 75, 2006 Search in Google Scholar

[4]Janet E. Nichol, Ahmed Shaker, Man-Sing Wong, Application of high- resolution stereo satellite images to detailed landslide hazard assessment, Geomorphology, 76, 68– 75, 2006 Search in Google Scholar

[5]Fosalau, C. et al, “A high performance strain gage based on the stressimpedance effect in magnetic amorphous wires”, Sensors and Actuators A: Physical, Vol. 191, pp. 105–110, 2013 Search in Google Scholar

[6]D. Atkinson, P.T. Squire, Experimental and phenomenological investigation of the effect of stress on magneto-impedance in amorphous alloys, IEEE Transactions on Magnetics, Volume 33, Issue 5, part 1, 3364-3366, 1997 Search in Google Scholar

[7]C. Zet, C. Fosalau, D. Petrisor, C. Damian, “Landslide transducer based on amorphous wire strain gauges”, 19th IMEKO TC4 Symposium Measurements of Electrical Quantities, Barcelona, SPAIN, 18-19 July 2013, pp. 286-289Search in Google Scholar