<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, the wire pressing device is designed, the range of true positive pressure, curves of steel friction coefficient changes with positive pressure. Describe the change trend of friction coefficient is: with the increasing pressure, friction coefficient of cable parallel wire decreased significantly, but when the pressure increases to a certain value, the friction coefficient decline is slowing down, and finally tends to a certain value. The curves of friction coefficient changes with positive pressure, provides a method and basis for the practical engineering of steel wire in the ultimate friction shear stress accurately, set up and stay cable as layered slipping model provides important parameters of bending stress analysis. From the numerical simulation method analyzes the positive pressure parallel wire between the start. This paper first parallel wire contact problem of two cables are analyzed with the classical theoretical solution and the FEM software ANSYS, to verify the feasibility, using ANSYS to solve the contact problem of accuracy and precision. On this basis, the strand steel beam of contact analysis, the preliminary inquiry arching effect on cable parallel wire.</p>
</abstract>

In this paper, the wire pressing device is designed, the range of true positive pressure, curves of steel friction coefficient changes with positive pressure. Describe the change trend of friction coefficient is: with the increasing pressure, friction coefficient of cable parallel wire decreased significantly, but when the pressure increases to a certain value, the friction coefficient decline is slowing down, and finally tends to a certain value. The curves of friction coefficient changes with positive pressure, provides a method and basis for the practical engineering of steel wire in the ultimate friction shear stress accurately, set up and stay cable as layered slipping model provides important parameters of bending stress analysis. From the numerical simulation method analyzes the positive pressure parallel wire between the start. This paper first parallel wire contact problem of two cables are analyzed with the classical theoretical solution and the FEM software ANSYS, to verify the feasibility, using ANSYS to solve the contact problem of accuracy and precision. On this basis, the strand steel beam of contact analysis, the preliminary inquiry arching effect on cable parallel wire.

Numerical Analysis of Sliding Friction Coefficient and the Normal Pressure Between the Cable Wire

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In this paper, the wire pressing device is designed, the range of true positive pressure, curves of steel friction coefficient changes with positive pressure....

Numerical Analysis of Sliding Friction Coefficient and the Normal Pressure Between the Cable Wire

Publicado en línea: 01 dic 2014

Páginas: 1773 - 1788

Recibido: 19 ago 2014

Aceptado: 10 nov 2014

DOI: https://doi.org/10.21307/ijssis-2017-732

Palabras clave
Stay cable, positive pressure arch effect, mechanism, friction coefficient, ANSYS, contact analysis

© 2014 Zhu Hui-ling et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Numerical Analysis of Sliding Friction Coefficient and the Normal Pressure Between the Cable Wire

Publicado en línea: 01 dic 2014

Páginas: 1773 - 1788

Recibido: 19 ago 2014

Aceptado: 10 nov 2014

DOI: https://doi.org/10.21307/ijssis-2017-732

Palabras claveStay cable, positive pressure arch effect, mechanism, friction coefficient, ANSYS, contact analysis

© 2014 Zhu Hui-ling et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
Stay cable, positive pressure arch effect, mechanism, friction coefficient, ANSYS, contact analysis