Feedforward Control of Temperature-Induced Head Skew for Hard Disk Drives

[1]K. S. Park, Y. P. Park, N. C. Park, “Prospect of recording technologies for higher storage performance,” IEEE Transactions on Magnetics, vol. 47, no. 3, 2011.10.1109/TMAG.2010.2102343 Search in Google Scholar

[2]Y. Hori, Y. Kanai, K. Taima, “An audiovisual content recorder using a removable hard disk drive,” IEEE Transactions on Consumer Electronics, vol. 56, no. 4, pp. 2324-2329, 2010. Search in Google Scholar

[3]Y. Uematsu, M. Fukushi, K. Taniguchi, “Development of the pushpin free STW [servo track writer],” IEEE Transactions on Magnetics, vol. 37, no. 2, pp. 964-968, 2001.10.1109/20.917651 Search in Google Scholar

[4]T. Yaada, M. Fkushi, H. Suzuki, etc, “Servo track writing technology,” FUJITSU Scientific & Technical Journal, vol. 42, no. 1, pp. 93-102, 2006. Search in Google Scholar

[5]Yong Xiao, Yujun Pang, Xiaoyu Ge, etc, “Compensation of shock-induced head skew for hard disk drives,” Procedia Engineering, vol. 16, pp. 65-71, 2011.10.1016/j.proeng.2011.08.1053 Search in Google Scholar

[6]Y. L. Chow, F. L. Lewis, V. Venkataramanan, etc, “Disturbance and friction compensations in hard disk drives using neural networks,” IEEE Transactions on Industrial Electronics, vol. 57, no.2, pp. 784-792, 2010.10.1109/TIE.2009.2027257 Search in Google Scholar

[7]T. Semba, M. T. White, F. Huang, “Adaptive cancellation of self-induced vibration,” IEEE Transactions on Magnetics, vol. 47, no. 7, pp. 1958-1963, 2011. Search in Google Scholar

[8]M. R. Graham, and R. A. de Callafon, “An iterative learning design for repeatable runout cancellation in disk drives,” IEEE Transactions on Control System Technology, vol. 14, no. 3, pp. 474-482, 2006.10.1109/TCST.2006.872531 Search in Google Scholar

[9]H. Fujimoto, “RRO compensation of Hard Disk Drives with multirate repetitive perfect tracking control,”, IEEE Transactions on Industrial Electronics, vol. 56, no. 10, pp. 38253831, 2009. Search in Google Scholar

[10]T. Atsumi, A. Okuyama, M. Kobayashi, “Track-following control using resonant filter in Hard Disk Drives,”, IEEE/ASME Transactions on Mechatronics, vol. 12, no. 4, pp. 472479, 2007. Search in Google Scholar

[11]Y. Xiao, C. Zhang, X. Y. Ge, etc, “Reliable recalibration of DC head skew in hard disk drives,”, in Proceeding of 2011 International Conference on Modelling, Identification and Control, Shanghai, China, pp. 26-29, 2011.10.1109/ICMIC.2011.5973722 Search in Google Scholar

[12]J. Y. Chang, “Thermal analysis and design of disk-spindle radial repeatable runout in spinning data storage devices,” IEEE Transactions on Magnetics, vol. 47, no. 7, pp. 18551861, 2011. Search in Google Scholar

[13]F. Gao, W. Z. Lin, C. W. Lee, etc, “Numerical hard disc drive seek acoustic transfer analysis and experimental validation”, IEEE Transactions on Magnetics, vol. 45, no. 11, pp. 4945-4949, 2009. Search in Google Scholar

[14]M. Y. Tsai and T. S. Liu, “Sliding mode based fuzzy control for positioning of optical pickup head,” International Journal on Smart Sensing and Intelligent Systems, vol. 3. no. 2, pp. 304-321, 2010.10.21307/ijssis-2017-394 Search in Google Scholar

[15]M. Rahmat, S. M. Rozali, N. A. Wahab, etc, “Application of draw wire sensor in position tracking of electro-hydraulic actuator system,” International Journal of Smart Sensing and Intelligent Systems, vol. 3. no. 4. pp. 736-755, 2010.10.21307/ijssis-2017-418 Search in Google Scholar