<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The development of dynamic rehabilitation devices can be evaluated as a research fastgrowing field. Indeed, robot-assisted therapy is an advanced new technology mainly in stroke rehabilitation. Although patients benefit from this enormous development of technology, including the presence of rehabilitation robots, the therapeutic field still suffering a lack in hand robotic rehabilitation devices. In this context, this work proposes a new design of a 3D printed hand exoskeleton for the stroke rehabilitation. Based on the EMG signals measured from the muscles responsible for the hand motion, the designed mechatronic system detects the intention of hand opening or hand closing from the stroked subject. Based on an embedded controller and five servomotors, the low cost robotic system is able to drive in real time three degrees of freedom (DOFs) for each finger. The real tests with stroked subjects showed that the designed hand exoskeleton architecture has a positive effect on the motion finger range and mainly in the hand ability to perform some simple tasks. The case studies showed a good recovery of the motor functions and consequently the developed system efficiency.</p>
</abstract>

The development of dynamic rehabilitation devices can be evaluated as a research fastgrowing field. Indeed, robot-assisted therapy is an advanced new technology mainly in stroke rehabilitation. Although patients benefit from this enormous development of technology, including the presence of rehabilitation robots, the therapeutic field still suffering a lack in hand robotic rehabilitation devices. In this context, this work proposes a new design of a 3D printed hand exoskeleton for the stroke rehabilitation. Based on the EMG signals measured from the muscles responsible for the hand motion, the designed mechatronic system detects the intention of hand opening or hand closing from the stroked subject. Based on an embedded controller and five servomotors, the low cost robotic system is able to drive in real time three degrees of freedom (DOFs) for each finger. The real tests with stroked subjects showed that the designed hand exoskeleton architecture has a positive effect on the motion finger range and mainly in the hand ability to perform some simple tasks. The case studies showed a good recovery of the motor functions and consequently the developed system efficiency.

DESIGN AND DEVELOPMENT OF 3D PRINTED MYOELECTRIC ROBOTIC EXOSKELETON FOR HAND REHABILITATION

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The development of dynamic rehabilitation devices can be evaluated as a research fastgrowing field. Indeed, robot-assisted therapy is an advanced new...

DESIGN AND DEVELOPMENT OF 3D PRINTED MYOELECTRIC ROBOTIC EXOSKELETON FOR HAND REHABILITATION

Publicado en línea: 01 jun 2017

Páginas: 1 - 26

Recibido: 06 feb 2017

Aceptado: 15 abr 2017

DOI: https://doi.org/10.21307/ijssis-2017-215

Palabras clave
robotic exoskeleton, 3D printing, EMG control, features extraction, stroke rehabilitation

© 2017 Ismail Ben Abdallah et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

DESIGN AND DEVELOPMENT OF 3D PRINTED MYOELECTRIC ROBOTIC EXOSKELETON FOR HAND REHABILITATION

Publicado en línea: 01 jun 2017

Páginas: 1 - 26

Recibido: 06 feb 2017

Aceptado: 15 abr 2017

DOI: https://doi.org/10.21307/ijssis-2017-215

Palabras claverobotic exoskeleton, 3D printing, EMG control, features extraction, stroke rehabilitation

© 2017 Ismail Ben Abdallah et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
robotic exoskeleton, 3D printing, EMG control, features extraction, stroke rehabilitation