<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper studied the relationship between the spindle fault and the roughness characteristics, by surface roughness of machining. Spindle common fault is divided into the spindle system is not balanced, the spindle system is not right, the spindle system has a transverse crack and the spindle system rolling bearing failure. The characteristic amount of the machining surface is extracted by CCD laser speckle surface roughness measurement technique. Machine fault information and rough surface relationship were established through the adaptive network-based fuzzy inference system (ANFIS) , to achieve the machine tool spindle fault diagnosis. The results indicate that the roughness characteristic can accurately diagnose the machine tool spindle fault and can be an effective method to study the spindle fault of the machine tool.</p>
</abstract>

This paper studied the relationship between the spindle fault and the roughness characteristics, by surface roughness of machining. Spindle common fault is divided into the spindle system is not balanced, the spindle system is not right, the spindle system has a transverse crack and the spindle system rolling bearing failure. The characteristic amount of the machining surface is extracted by CCD laser speckle surface roughness measurement technique. Machine fault information and rough surface relationship were established through the adaptive network-based fuzzy inference system (ANFIS) , to achieve the machine tool spindle fault diagnosis. The results indicate that the roughness characteristic can accurately diagnose the machine tool spindle fault and can be an effective method to study the spindle fault of the machine tool.

Research on Fault Diagnosis Technology of CNC Machine Tool Based on Machining Surface Roughness

International Journal of Advanced Network, Monitoring and Controls

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper studied the relationship between the spindle fault and the roughness characteristics, by surface roughness of machining. Spindle common fault is...

Research on Fault Diagnosis Technology of CNC Machine Tool Based on Machining Surface Roughness

Publicado en línea: 12 abr 2018

Páginas: 98 - 102

DOI: https://doi.org/10.21307/ijanmc-2017-066

Palabras clave
the spindle fault, roughness characteristics, CCD, ANFIS, machining

© 2017 Zhou Guang-wen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Research on Fault Diagnosis Technology of CNC Machine Tool Based on Machining Surface Roughness

Publicado en línea: 12 abr 2018

Páginas: 98 - 102

DOI: https://doi.org/10.21307/ijanmc-2017-066

Palabras clavethe spindle fault, roughness characteristics, CCD, ANFIS, machining

© 2017 Zhou Guang-wen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
the spindle fault, roughness characteristics, CCD, ANFIS, machining