A Study and Simulation on Thermal Cycling System of CFB Boiler

[1]S. Kumar, A. K. Mondal, H.Dieringa and K. Kainer, “Analysing hysteresis and residual strains in thermal cycling curves of short fibre reinforced Mg-MMCs,”Composites Science and Technology, vol.64, pp.1179-1189,2014.Search in Google Scholar

[2]Wang Jinhui, Duo Jun and Ding Yanlin, “Thermal cycling behavior of Mg-4%Sn-2.5%Pb alloy,” Journal of Residuals Science & Technology, vol.14,pp.420-425,2017.Search in Google Scholar

[3]T.W.Clyne and W.J.Withers, Introduction Metal Matrix Composite. Beijing: Metallurgic Industry Press, 2016.Search in Google Scholar

[4]Bing Liu,Xuemin Yang,Wenli Song and Weigang Lin, “Process simulation development of coal combustion in a circulating fluidized bed combustor based on aspen plus,’’Energy & Fuels,vol.25,pp.1721- 1730,2015.Search in Google Scholar

[5]J Pan ,G Wu and D Yang, “Thermal-hydraulic calculation and analysis on water wall system of 600MW supercritical CFB boiler,’Applied Thermal Engineering, vol.82,pp.225-236,2015.10.1016/j.applthermaleng.2015.03.004Search in Google Scholar

[6]S.Y.Chang, SJ. Flemings, M.C Lin, “Thermal expansion behavior of silver matrix composites,”Metallurgical and Materials Transactions A, vol.31,pp.291-298,2014.10.1007/s11661-000-0073-7Search in Google Scholar

[7]P.L.Wu,L.D. Wang,W.D. Fei, “Interfacial reaction in Al matrix composites reinforced by Mg borate whisker,” Materials Science Forum, vol.33,pp.643-648,2016.10.4028/0-87849-432-4.643Search in Google Scholar

[8]Rong Zhou,Thermal Cycling System.Beijing: Electronic Industry Press, 2015.Search in Google Scholar

[9]J Pettersson, C Pettersson and N Folkeson, “The influence of sulfur additions on the corrosive environments in a waste-fired CFB boiler,’Materials Science Forum,vol.55,pp.563-570,2016.10.4028/0-87849-409-x.563Search in Google Scholar

[10]J Pan ,D Yang and G Chen, “Thermal-hydraulic analysis of a 600MW supercritical CFB boiler with low mass flux,”Applied Thermal Engineering, vol.32,pp.41-48,2014.10.1016/j.applthermaleng.2011.08.009 Search in Google Scholar