[ANONYMUS (2001): Electronic Hammer: Instructions for Use and Guarantee Conditions. Instrumenta Mechanik Labor (IML) GmbH. Wiesloch, Germany.]Search in Google Scholar
[BANNISTER, M. H. and M. H. VINE (1981): An early progeny trial in Pinus radiata. 4. Wood density. N. Z. J. For. Sci. 11: 221-243.]Search in Google Scholar
[BETHGE, K. and C. MATTHECK (1998): Instruments for detection and evaluation of decay and wood quality in standing trees. In: Proceedings of the eleventh international symposium on nondestructive testing of wood. Madison, WI. Edited by D. G. POLLOCK. Forest Products Society, Madison, USA. pp. 105-115.]Search in Google Scholar
[BIER, H. and R. A. J. BRITTON (1999): Strength properties of small clear specimens of New Zealand-grown timbers. Forest Research Bulletin No. 41, NZ Forest Research Institute, Rotorua, New Zealand.]Search in Google Scholar
[BURDON, R. D. and G. YOUNG (1991): Preliminary genetic parameter estimates for wood properties from topranked Pinus radiata progenies and comparison with controls. In: Proceedings of the Australian Forest Council Research Working Group No. 1 Meeting, Mt Gambier. Edited by C. HANEL and C. DEAN. Australian Forest Council RWG, Mt Gambier, Australia. pp. 137-140.]Search in Google Scholar
[BURDON, R. D., R. A. J. BRITTON and G. B. WALFORD (2001): Wood stiffness and bending strength in relation to density in four native provenances of Pinus radiata. N. Z. J. For. Sci. 31: 130-146.]Search in Google Scholar
[BORRALHO, N. M. G. (1995): The impact of individual tree mixed models (BLUP) in tree breeding strategies. In: Proceeding of the CRCTHF-IUFRO Conference: Eucalyptus plantations: Improving fibre yield and quality, Hobart, Australia. Edited by B. M. POTTS and N. M. G.]Search in Google Scholar
[BORRALHO. Cooperative Research Centre for Temperate Hardwood Forestry, Sandy Bay, Tasmania, Australia. pp. 141-145.]Search in Google Scholar
[COWN, D. J., M. O. KIMBERLEY and I. D. WHITESIDE (1987): Conversions and timber grade recoveries from radiata pine logs. New Zealand Forest Research Institute, Bulletin No. 128. pp. 147-161.]Search in Google Scholar
[COWN, D. J., J. HEBERT and R. BALL (1999): Modelling Pinus radiata lumber characteristics. Part 1: Mechanical properties of small clears. N. Z. J. For. Sci. 29: 203-213.]Search in Google Scholar
[DUNGEY, H. S., A. C. MATHESON, D. KAIN and R. EVANS (In press): Genetics of wood stiffness and its components traits in Pinus radiata. Can. J. For. Res..]Search in Google Scholar
[EVANS, R. (2003): Wood stiffness by x-ray diffractometry. In: Proceedings of the workshop “Characterisation of the cellulosic cell wall”, Grand Lake, Colorado, USA. Southern Research Station, University of Iowa and the Society of Wood Science and Technology.]Search in Google Scholar
[FALCONER, D. S. and T. F. C. MACKAY (1996): Introduction to Quantitative Genetics. 4th Edition. Addison Wesley Longman Ltd., Essex, UK.]Search in Google Scholar
[GILMOUR, A. R., R. THOMPSON, B. R. CULLIS and S. J. WELHAM (1997): ASREML User’s manual, New South Wales Agriculture, Orange, Australia.]Search in Google Scholar
[HARRIS, P. and M. ANDREWS (1999): Tools and acoustic techniques for measuring wood stiffness. In: Proceeding of the 3rd Wood Quality Symposium: Emerging Technologies for evaluating wood quality for wood processing, Rotorua, New Zealand. Edited by J. STULEN and B.]Search in Google Scholar
[APTHORP. Forest Industry Engineering Association, Rotorua, New Zealand. pp. 76-88. ]Search in Google Scholar
[JAYAWICKRAMA, K. J. S. (2001): Breeding radiata pine for wood stiffness: review and analysis. Aus. For. 64: 51-56.]Search in Google Scholar
[JEFFERSON, P. A., J. LEE, R. D. BALL and D. J. COWN (2001): Development of a juvenile wood index. New Zealand Radiata Pine Breeding Cooperative, Unpublished report.]Search in Google Scholar
[KUMAR, S. (2004): Genetic parameter estimates for wood stiffness, strength, internal checking and resin bleeding for radiata pine. Can. J. For. Res. 34: 2601-2610.]Search in Google Scholar
[KUMAR, S. and J. LEE (2002): Age-age correlations and early selection for end-of-rotation wood density in radiata pine. For. Gen. 9: 323-330. ]Search in Google Scholar
[KUMAR, S., K. J. S. JAYAWICKRAMA, J. LEE and M. LAUSBERG (2002): Direct and indirect measures of stiffness and strength show high heritability in a wind-pollinated radiata pine progeny test in New Zealand. Silvae Genet. 51: 256-261.]Search in Google Scholar
[LAUNAY, J., M. IVKOVICH, L. PAQUES, C. BASTIEN, P. HIGELIN and P. ROZENBERG (2002): Rapid measurement of trunk MOE on standing trees using RIGIDIMETER. Ann. For. Sci. 59: 465-469.]Search in Google Scholar
[LINDSTRÖM, H., P. HARRIS and R. NAKADA (2002): Methods for measuring stiffness of young trees. Holz als Roh und Werkstoff 60: 165-174.10.1007/s00107-002-0292-2]Search in Google Scholar
[LYNCH, M. and B. WALSH (1998): Genetics and Analysis of Quantitative Traits. Sinauer Associates, Inc., Sunderland, MA, USA.]Search in Google Scholar
[MACK, J. J. (1979): Australian method for mechanically testing small clear specimens of timber. Building Research Technical Paper (Second Series) No. 31, CSIRO, Australia.]Search in Google Scholar
[MATHESON, A. C., D. J. SPENCER, J. G. NYAKUENGAMA, J. YANG and R. EVANS (1997): Breeding for wood properties in radiata pine. Pp. 169-179. In: BURDON, R. D., MOORE, J. M. (Ed.) “IUFRO ‘97 Genetics of Radiata Pine”. Proceedings of NZ FRI-IUFRO Conference 1-4 December and Workshop 5 December, Rotorua, New Zealand. FRI Bulletin No. 203.]Search in Google Scholar
[MATHESON, A. C., R. L. DICKSON, D. J. SPENCER, B. JOE and J. ILIC (2002): Acoustic segregation of Pinus radiata logs according to stiffness. Ann. For. Sci. 59: 471-477.]Search in Google Scholar
[MATOS, C. A. P., D. L. THOMAS, D. GIANOLA, R. J. TEMPELMAN and L. D. YOUNG (1997): Genetic analysis of discrete reproductive traits in Sheep using linear and nonlinear Models: I. Estimation of Genetic Parameters. J. Anim. Sci. 75: 76-87.10.2527/1997.75176x9027551]Open DOISearch in Google Scholar
[ROSS, R. R. (1999): Using sound to evaluate standing timber. Int. For. Rev. 1: 43-44.]Search in Google Scholar
[ROSS, R. R. and R. F. PELLERIN (1991): Non-destructive testing for assessing wood members in structures: A review. USDA Forrest Service, Forest Products Laboratory GTR-70.]Search in Google Scholar
[SAS INSTITUTE INC. (1989): SAS/STAT User’s Guide, Version 6, Fourth Edition, Volume 2, SAS Institute Inc., Cary, NC, USA.]Search in Google Scholar
[SHELBOURNE, C. J. A. and C. B. LOW (1980): Multi-trait index selection and associated genetic gains of Pinus radiata progenies at five sites. N. Z. J. For. Sci. 10: 307-324.]Search in Google Scholar
[WALKER, J. F. C. and R. NAKADA (1999): Understanding corewood in some softwoods: a selective review on stiffness and acoustics. Int. For. Rev. 1: 251-259.]Search in Google Scholar
[XIPING, W., R. J. ROSS, J. R. ERICKSON, J. W. FORSMAN, M. MCCLELLAN, R. J. BARBOUR and R. F. PELLERIN (2000): Nondestructive evaluation of standing trees with stress wave methods. In: Proceedings of the 12th International Symposium on Nondestructive Testing of Wood, Hungary. Edited by F. DIVOS and R. F. PELLERIN. University of Western Hungary, Sopron. pp. 197-206.]Search in Google Scholar