Structural drilling using the high-frequency (sonic) rotary method

[1] Yu Wang, Baolin Liu, Qin Zhou, Yunabiao Hu, Guomin Li (2013): Design of a Sonic Drill Based on Virtual Prototype Technology, Transactions of the Canadian Society for Mechanical Engineering, Vol. 37, No. 2, pp. 185 - 19610.1139/tcsme-2013-0011Search in Google Scholar

[2] Lucon P.A. (2013), Resonance: The Science Behind the Art of Sonic Drilling, Dissertation, Montana State University 2013; pp. 224Search in Google Scholar

[3] Bar-Cohen Y., Sherrit S., Dolgin B., Pal D., Peterson T., Kroh J., Krahe R. (2001): Ultrasonic/Sonic Drilling/ Coring (USDC) for In Situ Planetary Applications, Annual International Symposium on Smart Structures and Materials, Paper No. 4327-55, pp. 810.1117/12.436556Search in Google Scholar

[4] Yu Wang, Qin Zhou, Baolin Liu, Zhijun Li, Mingxin Huang (2015): Design and model analysis of the sonic vibration head, Journal of Vibroengineering, Vol. 7, Issue 5, pp. 2121 - 2131Search in Google Scholar

[5] Šporin J., Vukelić Ž. (2007): Optimization of geo-mechanical- structural drilling with diamond crowns, RMZ M&G, Vol. 54, No. 1, pp.117 - 126Search in Google Scholar

[6] Shuter E., Teasdale W.E. (1989): Techniques of water- resurce investigations of the United States geological survey, Application of drilling, coring and sampling techniques to test holes and wells, U.S. department of the interior, Book 2, pp. 106Search in Google Scholar

[7] Sterling S., Briscoe G., Melany M. (2011): Drilling, logging and sampling of DGR-5 and DGR-6, Geofirma, DGR Site characterization document, Document id.: TR-09-01, pp. 175Search in Google Scholar

[8] Sapinska-Sliwa A., Wisniowski R., Korzec M., GajdoszA., Sliwa T. (2015): Rotary - percussion drilling method - historical review and current possibilities of application, AGH University of science and Technology, Facullty of drilling, oil and gas, Vol. 32, No. 2, pp. 313 - 32310.7494/drill.2015.32.2.313Search in Google Scholar

[9] Han G., Bruno M., Dusseault M.B. (2005): Dynamically Modelling Rock Failure in Percussion Drilling, Alaska Rocks 2005, The 40th U.S. Symposium on Rock Mechanics (USRMS): Rock Mechanics for Energy, Mineral and Infrastructure Development in the Northern Regions, held in Anchorage, 05-819, pp. 7Search in Google Scholar

[10] Li Lianggang, Zhang Bing, Luo Qiang (2014): Study on Vibration Frequency and Rock Fragmentation Effect of Sonic Drill Rig, Geological Engineering Drilling Technology Conference10.1016/j.proeng.2014.06.162Search in Google Scholar

[11] Bratton Steve (2012): Sonic Drilling in Support of Geotechnical Investigation and Geo-Construction, Geo-Strata, pp. 24 - 31 Search in Google Scholar

[12] Wentz F.J., Dickenson S.E. (2013): Pore pressure response during high frequency sonic drilling and SPT sampling in liquefiable sand, 19th NZGS Geotehnical Symposium, pp. 9Search in Google Scholar

[13] Campbell J. (2016): Versatility and Other Benefits Help Drive Adoption of Sonic Drilling, National driller, May issue, pp. 3Search in Google Scholar

[14] Weikel E.O. (2014): Geotechnical drilling and sampling in earth embankment dams and levees, US Army Corps of Engineers, Regulation No. 1110-1-1807, pp.16Search in Google Scholar

[15] Davis J.P. (2005): Sensitive Infrastructure Sites - Sonic Drilling Offers Quality Control and Non-Destructive Advantages to Geotechnical Construction Drilling, Boart Longyear, pp.14Search in Google Scholar