[1. United Nations Environment Program (UNEP) Montreal Protocol on Substances that Deplete the Ozone Layer, 1997.]Search in Google Scholar
[2. IPPC, Climate Change, Cambridge University Press, Cambridge, United Kingdom, 2001.]Search in Google Scholar
[3. Ghodbane M.: An investigation of R152a and hydrocarbon refrigerants in mobile air conditioning, Int. Proceedings of International Congress and Exposition, Detroit, Paper no. 1999-01-0874, Warrendale, PA.10.4271/1999-01-0874]Search in Google Scholar
[4. Lorentzen G.: Revival of carbon dioxide as refrigerant, Int. J. Refrigeration 17 (3), 1994, pp. 292-301.10.1016/0140-7007(94)90059-0]Search in Google Scholar
[5. Zhao Y., Liang Y., Sun Y., Chen J.: Development of a mini-channel evaporator model using R1234yf as working fluid, 35, 2012, pp. 2166-2178.10.1016/j.ijrefrig.2012.08.026]Search in Google Scholar
[6. Minor B., Spatz M.: HFO-1234yf low GWP refrigerant update, Int. International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, IN, USA. Paper no 2349.]Search in Google Scholar
[7. Refprop v 9.0, National Institute of Standards (NIST), 2010.]Search in Google Scholar
[8. Park K. J., Jung D.: Nucleate boiling heat transfer coefficients or R1234yf on plain and low fin surfaces, Int. J. Refrigeration 33 (3), 2010, pp. 553-557.10.1016/j.ijrefrig.2009.12.020]Search in Google Scholar
[9. Lu M-C., Tong J-R., W C-C.: Investigation of the twophase convective boiling of HFO-1234yf in a 3.9 mm diameter tube, Int. J. Heat and Mass Transfer, 65, 2013, pp. 545-551.10.1016/j.ijheatmasstransfer.2013.06.004]Search in Google Scholar
[10. Del Col D., Bortolini S., Torresin D., Cavallini A.: Flow boiling of R1234yf in a 1 mm diameter channel, Int. J. of Refrigeration, 36, 2013, pp. 353-362.10.1016/j.ijrefrig.2012.10.026]Search in Google Scholar
[11. Satioh S., Dang C., Nakamura Y., Hihara E.: Boiling heat transfer of HFO-1234yf flowing in a smooth smalldiameter horizontal tube, Int. J. Refrigeration, 33, 2011, pp. 1846-1853.10.1016/j.ijrefrig.2011.05.018]Search in Google Scholar
[12. Copetti J. B., Macaganan M. H., Zinani F.: Experimental study on R-600a boiling in 2.6 mm tube, Int. J. Refrigeration, 33, 2013, pp. 325-334.10.1016/j.ijrefrig.2012.09.007]Search in Google Scholar
[13. Kwang-Il Choi, Jong Taek Oh, Kiyoshi Satio, Jong Soo Jeong: Comparison of Heat Transfer Coefficient during Evaporation of Natural Refrigerants and R-1234yf in Horizontal Small Tube, Int. J. Refrigeration, 2014, 41, pp. 210-218.10.1016/j.ijrefrig.2013.06.017]Search in Google Scholar
[14. Kundu A., Kumar R., Gupta A.: Heat transfer characteristic and flow pattern during two-phase flow boiling of R134a and R407C in a horizontal smooth tube, Experimental Thermal and Fluid Science, 57, 2014, pp. 344-352.10.1016/j.expthermflusci.2014.05.020]Search in Google Scholar
[15. Xu Y., Fang X., Li G., Li D.: An experimental study of flow boiling heat transfer of R134a and evaluation of existing correlations, Int. J. Heat and Mass Transfer, 92, 2016, pp. 1143-1157.10.1016/j.ijheatmasstransfer.2015.09.044]Search in Google Scholar
[16. Mancin S., Diani A., Rossetto L.: R134a flow boiling heat transfer coefficient and pressure drop inside 3.4 mm ID microfin tube, Energy Proceedia, 45, 2014, pp. 608-615.10.1016/j.egypro.2014.01.065]Search in Google Scholar
[17. Tibirçá C. B., Ribatski G.: Flow boiling heat transfer of R134a and R245fa in 2.3 mm tube, Int. J. Heat and Mass Transfer, 53, 2010, pp. 2459-2468.10.1016/j.ijheatmasstransfer.2010.01.038]Search in Google Scholar
[18. Diani A., Mancin S., Rossetto L.: Flow boiling heat transfer of R1234yf inside 3.4 mm ID microfin tube, Experimental Thermal and Fluid Science, 66, 2015, pp. 127-136.10.1016/j.expthermflusci.2015.03.019]Search in Google Scholar
[19. Owhaib W., Martin-Callizo C., Palm B.: Evaporative heat transfer in vertical circular microchannels, Applied Thermal Engineering, 24, 2004, pp. 1241-1253.10.1016/j.applthermaleng.2003.12.030]Search in Google Scholar
[20. Shiferaw D., Karayiannis T. G., Kenning D. B. R.: Flow boiling in a 1.1 mm tube with R134a: experimental results and comparison with model, Int. J. Thermal Sciences, 48, 2009, pp. 331-341.]Search in Google Scholar
[21. Martin-Callizo C., Ali R., Palm B.: New experimental results of flow boiling of R134a in vertical microchannel, Heat Transfer Conference Proceedings, Edinburgh 10-11 September, 2007, UK.]Search in Google Scholar
[22. Consolini L., Thome J. R.: Micro-channel flow boiling heat transfer or R134a, R236fa and R245fa, Microfluid Nanofluids 6, 2009, pp. 731-746.10.1007/s10404-008-0348-7]Search in Google Scholar
[23. Mahmoud M. M., Kenning D. B. R., Karayiannis T. G.: Single and two phase heat transfer and pressure drop in a 0.52 mm vertical metallic tube, 7th Int. Conference in Enhanced, Compact and Ultra-compact Heat Exchangers: From Microscale Phenomena to Industrial Applications, September 13-18, Heredia, Costa Rica, 2012.]Search in Google Scholar
[24. Ong C. I., Thome J. R.: Flow boiling heat transfer of R134a, R236f and R245fa in a horizontal 1.030 mm circular channel, Exp. Therm. Fluid Sci., 33, 2009, pp. 651-663.10.1016/j.expthermflusci.2009.01.002]Search in Google Scholar
[25. Anwar Z., Palm B., Khodabandeh R.: Flow boiling heat transfer, pressure drop and dryout characteristics of R1234yf: Experimental results and predictions, Experimental Thermal and Fluid Science, 66, 2015, pp. 137-149.10.1016/j.expthermflusci.2015.03.021]Search in Google Scholar
[26. Mortada S., Zoughaib A., Arzano-Daurelle C., Clodic D.: Boiling heat transfer and pressure drop of HFC-134a and R-1234yf in minichannels for low mass fluxes, Int. J. Refrigeration, 35, 2012, pp. 962-973.10.1016/j.ijrefrig.2012.03.004]Search in Google Scholar
[27. Ribatski G.: A critical overview on the recent literature concerning flow boiling and two - phase flows inside microscale channels, ECI 8th Int. Conference on Boiling and Condensation Heat Transfer, 3 - 7 June 2012, Lausanne, Switzerland.10.1080/08916152.2012.737189]Search in Google Scholar
[28. Tibirçá C. B., Ribatski G.: Flow boiling in micro-scale channels - Synthesized literature review, Int. J. Refrigeration, 36, 2013, pp. 301 - 324. 10.1016/j.ijrefrig.2012.11.019]Search in Google Scholar
[29. Sardeshpande M., Ranade V.: Two - phase flow boiling in small channels: A brief review, Sadhana, 38, 2013, pp. 1083 - 1126.10.1007/s12046-013-0192-7]Search in Google Scholar
[30. Alagesan V.: Flow boiling heat transfer in mini and micro channels - A state of the art review, Int. J. ChemTech Research, 4, 2012, pp. 1247 - 1259.]Search in Google Scholar
[31. Mikielewicz D., Mikielewicz J., Tesmar J.: Improved semiempirical method for determination of heat transfer coefficient in flow boiling in conventional and small diameter tubes, International Journal of Heat and Mass Transfer, 50(19-20), 2007, pp. 3949-3956.10.1016/j.ijheatmasstransfer.2007.01.024]Search in Google Scholar
[32. Mikielewicz D., Andrzejczyk R., Jakubowska B., Mikielewicz J.: Analytical model with non-adiabatic effects for pressure drop and heat transfer during boiling and condensation flows in conventional channels and minichannels, Heat Transfer Engineering, 37(13-14), 2016, pp. 1158-1171.10.1080/01457632.2015.1112213]Search in Google Scholar
[33. Muller-Steinhagen R., Heck K.: A simple friction pressure drop correlation for two-phase flow in pipes, Chem. Eng. Progress, 20, 1986.10.1016/0255-2701(86)80008-3]Search in Google Scholar
[34. Cooper M. G.: Saturation nucleate pool boiling; a simple correlation, Int. Chem. Eng. Symposium 1, 86, 1984, pp. 785 - 793.10.1016/B978-0-85295-175-0.50013-8]Search in Google Scholar
[35. Kew P., Cornwell K.: Correlations for the prediction of boiling heat transfer in small diameter channels, Applied Thermal Engineering, 17, 8 - 10, (1997), 705 - 715.]Search in Google Scholar
[36. Deja M., Siemiątkowski M.S.: Feature-based generation of machining process plans for optimised parts manufacture. Journal of Intelligent Manufacturing, 2013, Vol.24, No.4, pp. 831-846.10.1007/s10845-012-0633-x]Search in Google Scholar
[37. Szłapczyński R.: Evolutionary Planning of Safe Ship Tracks in Restricted Visibility. Journal of Navigation, 2015, Vol.68, No.1, pp.39-51.10.1017/S0373463314000587]Search in Google Scholar
[38. Stolarski T.A.: Wear of water-lubricated composite materials. Wear, 1980, Vol.58, No.1, pp. 103-108.10.1016/0043-1648(80)90215-X]Search in Google Scholar
[39. Jakubowski M.: Influence of pitting corrosion on fatigue and corrosion fatigue of ship and offshore structures. Part II: Load - pit crack interaction. Polish Maritime Research, 2015, Vol.22, No.3, pp. 57-66.10.1515/pomr-2015-0057]Search in Google Scholar
[40. Ambroziak A., Kłosowski P.: Mechanical properties for preliminary design of structures made from PVC coated fabric. Construction and Building Materials, 2014, 50, pp. 74-81. 10.1016/j.conbuildmat.2013.08.060]Search in Google Scholar