[1. Bendat J.S., Pierdol A.G., Methods of analysis and measurement of random signals (in Polish), PWN, Warszawa, 1976.]Search in Google Scholar
[2. Kocańda S., Szala J., Fundamentals of fatigue calculations (in Polish), PWN, Warszawa, 1997.]Search in Google Scholar
[3. Norma ASTM, Standard practices for cycle counting in fatigue analysis, ASTM Designation: E 1049-85 (Reapproved 1990).]Search in Google Scholar
[4. Ligaj B., Szala G., Experimental verification of twoparametric models of fatigue characteristics by using the tests of S355J0 steel as an example, Polish Maritime Research, No.1 (2010), pp. 39-50.]Search in Google Scholar
[5. Szala J., Loads and fatigue life of machine elements (in Polish), University of Technology and Agriculture, Bydgoszcz 1989.]Search in Google Scholar
[6. Szala G., Ligaj B., Description of cyclic properties of steel in variability conditions of mean values and amplitudes of loading cycles, Materials Science Forum, Fatigue Failure and Fracture Mechanics, Vol. 726, 2012, pp. 69-76.10.4028/www.scientific.net/MSF.726.69]Search in Google Scholar
[7. Szala G., Theoretical and experimental analysis of twoparametric fatigue life characteristics of structural steels (in Polish), 1st part of the monograph titled: Twoparametric fatigue life characteristics of structural steels and their experimental verification, Publishing House of Operation Technology Institute , State Research Institute, Radom, 2011.]Search in Google Scholar
[8. Szala G., Comments on linear summation hypothesis of fatigue failures, Polish Maritime Research, No.3 (2014), pp. 77-85.]Search in Google Scholar
