[1. Rozenfeld, I.L. 1981. Corrosion Inhibitors; McGraw-Hill. New York. p. 182.]Search in Google Scholar
[2. Roberge, P.R. 2008. Corrosion Engineering Principle and Practice. McGraw-Hill. New York. 730 p.]Search in Google Scholar
[3. McCoy, J.S. (2006). Introduction: Tracing the Historical Development of Metalworking Fluids, in Metalworking Fluids; Byers. J.P. Ed.; 2nd edition. Taylor & Francis. New York. pp. 1–18.]Search in Google Scholar
[4. Brinksmeier, E., Meyer, D., Huesmann-Cordes, A.G. & Herrmann, C. (2015). Metalwor-king fluids-Mechanisms and performance. CIRP Ann. Manufact. Technol. 64, 605–628 (http://creativecommons.org/licenses/by-nc-nd/4.0/).]Search in Google Scholar
[5. Hugh Spikes (2008). Low- and zero-sulphated ash. phosphorus and Sulphur anti-wear additives for engine oils. Lubrication Sci. 20, 103–136 DOI: 10.1002/ls.57.10.1002/ls.57]Open DOISearch in Google Scholar
[6. Fouda, A.S., Elmorsi, M.A. & Abou-Elmagd, B.S. (2017). Adsorption and inhibitive properties of methanol extract of Eeuphorbia Heterophylla for the corrosion of copper in 0.5 M nitric acid solutions. Pol. J. Chem. Technol. 19(1), 95–103. DOI: 10.1515/pjct-2017-0014.10.1515/pjct-2017-0014]Search in Google Scholar
[7. Dharma, R., Kodali. (2002). “High performance ester lubricants from natural oils”. Ind. Lubr. Tribol. 54(4) 165–170. http://dx.doi.org/10.1108/0036879021043171810.1108/00368790210431718]Open DOISearch in Google Scholar
[8. Zvirko, O.I., Mytsyk, A.B., Tsyrulnyk, O.T., Gabetta, G. & Nykyforchyn, H.M. (2017). Corrosion Degradation of Steel of an Elbow of Gas Pipeline with Large-Scale Delamination after Long-Term Operation. Mater. Sci. 52(6). 861–865 https://doi.org/10.1007/s11003-017-0032-8.10.1007/s11003-017-0032-8]Search in Google Scholar
[9. Ghai, I., Wentz, J., DeVor, R.E., Kapoor, S.G. & Samuel, J. (2010). Droplet behavior on a rotating surface for atomization-based cutting fluid application in micromachining. J. Manuf. Sci. Eng. 132(1). 011017 DOI:10.1115/1.400085910.1115/1.4000859]Open DOISearch in Google Scholar
[10. Myshkin, N.K. & Markova, L.V. (2016). Methods and Instruments for Condition Monitoring of Lubricants. In: On-line Condition Monitoring in Industrial Lubrication and Tribology. Appl. Condit. Monitoring, 8, 1–29 Springer. Cham. https://doi.org/10.1007/978-3-319-61134-1_110.1007/978-3-319-61134-1_1]Search in Google Scholar
[11. Zhao, F., Urbance, M. & Skerlos, S.J. (2004). Mechanistic Model of Coaxial Microfiltration for Semi-Synthetic Metalworking Fluid Microemulsions. J. Manufact. Sci. Enginee. 126(3), 435. http://doi.org/10.1115/1.1763187.10.1115/1.1763187]Open DOISearch in Google Scholar
[12. Shujun, Gao, Peng, Jin, Bruce, Brown and etc. (2017). Corrosion behavior of mild steel in sour environments at elevated temperatures. Corrosion. Vol. 73. No. 8. pp. 915–926 https://doi.org/10.5006/236610.5006/2366]Open DOISearch in Google Scholar
[13. Aiad, I., Riya, M.A., Tawfik, S.M. & Abousehly, A.M. (2016). Protection of carbon steel against corrosion in hydrochloric acid solution by some synthesized cationic surfactants. 52: 339. https://doi.org/10.1134/S207020511602002710.1134/S2070205116020027]Open DOISearch in Google Scholar
[14. Skerlos, S.J., Rajagopalan, N., DeVor, R.E., Kapoor, S.G. & Angspatt, V.D. (2001). Microfiltration of Polyoxyalkylene Metalworking Fluid Lubricant Additives Using Aluminum Oxide Membranes. J. Manufact. Sci. Enginee. 123(4), 692. http://doi.org/10.1115/1.1392993.10.1115/1.1392993]Open DOISearch in Google Scholar
[15. Thomas Norrby. (2003). Environmentally adapted lubricants – where are the opportu-nites? Ind. Lubr. Tribol. 5(6), 268–274. https://doi.org/10.1108/00368790310496400.10.1108/00368790310496400]Open DOISearch in Google Scholar
[16. Skerlos, S.J. (2011). Cutting Fluids and their Environmental Impact. Chap. Encyclop. Tribol. Springer. http://doi.org/10.1007/978-0-387-92897-5.10.1007/978-0-387-92897-5]Open DOISearch in Google Scholar
[17. MacLean, D., Hayes, K., Barnard, T., Hull, T., Park, Y.E. & Skerlos, S.J. (2009). Impact of Supercritical Carbon Dioxide Metalworking Fluids on Tool Life in turning of Sintered Steel and Milling of Compacted Graphite Iron. Proceed. ASME Inter. Manufact. Sci. Enginee. Conference 2009. MSEC2009, October 4–7, 2009. West Lafayette. Indiana. USA. pp. 43–48.10.1115/MSEC2009-84026]Search in Google Scholar
[18. Singh, B.P., Nayak., S., Nanda. K., Bikash, K.J., Bhattacharjee, S. & Besra, L. (2013). The production of a corrosion resistant graphene reinforced composite coating on copper by electrophoretic deposition. Carbon 61, 47–56. DOI: 10.1016/j.carbon.2013.04.063.10.1016/j.carbon.2013.04.063]Open DOISearch in Google Scholar
[19. Kaiyue, Li., Guoding Chen, Deng Liu. (2016). Study of the influence of lubrication parameters on gear lubrication properties and efficiency. Ind. Lubr. Tribol. 68(6). 647–657. https://doi.org/10.1108/ILT-06-2015-008910.1108/ILT-06-2015-0089]Open DOISearch in Google Scholar
[20. Chang, S.C., Rihana, A., Bahrman, S., Gruden, C.L., Khijniak, A.I., Skerlos, S.J. & Adriaens, P. (2004). Flow cytometric detection and quantification of mycobacteria in metalworking fluids. Inter. Biodeterioration & Biodegradation 54(2–3), 105–112. http://doi.org/10.1016/j.ibiod.2004.03.01910.1016/j.ibiod.2004.03.019]Open DOISearch in Google Scholar
[21. Hernández Gayosso, M.J. Nava, N. & Zavala, G. Olivares. (2016). Characterisation and comparison of corrosion products originated in steel pipelines transporting sour gas and crude oil. Inter. J. Corr. Process. Corr. Control 51(8), 626–634. http://dx.doi.org/10.1080/1478422X.2016.1173421.10.1080/1478422X.2016.1173421]Search in Google Scholar
[22. Bhanudas Dattatraya Bachchhav, Geeta, S. Lathkar. Harijan Bagchi. (2014). Tribology of drawing lubricants for low carbon steel. Ind. Lubr. Tribol. 66(6), 640–644. https://doi.org/10.1108/ILT-10-2012-0105.10.1108/ILT-10-2012-0105]Open DOISearch in Google Scholar
[23. Nasirov, F.A. (1983). Issledovaniye i razrabotca prochessa polucheniya nizcomolekulyar-noqo polibutadiyena v prisutstvii cataliticheskix sistem na osnove orqanichescix ditioproizvodnix nicelya (cobalta). Diss... cand.xim.nauk.. Baku. IPP ANAS 202 p.]Search in Google Scholar
[24. ASTM C 613-14: ‘Standard test method for constituent content of composite prepreg by Soxhlet Extraction’.]Search in Google Scholar
[25. van de Voort, F.R., Sedman, J. & Pinchuk, D. (2011). An overview of progress and new developments in FTIR lubricant condition monitoring methodology. J. ASTM Int. 8(5). ID: JAI103344Google Scholar.]Search in Google Scholar
[26. Zimmerman, J.B., Hayes, K.F. & Skerlos, S.J. (2004). Influence of Ion Accumulation on the Emulsion Stability and Performance of Semi-Synthetic Metalworking Fluids. Enviromen. Sci. Technol, 38(8), 2482–2490. http://doi.org/10.1021/es034047710.1021/es034047715116857]Search in Google Scholar
[27. Li Ming Chu, Jaw-Ren Lin, Yuh-Ping Chang. & Chung-Chun Wu. (2016). Elastohydrodynamic lubrication of circular contacts at pure squeeze motion with micropolar lubricants. Ind. Lubr. Tribol. 68(6) pp. 640–646. https://doi.org/10.1108/ILT-10-2015-0139.10.1108/ILT-10-2015-0139]Open DOISearch in Google Scholar