<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The objective of this study was to develop prediction mathematical equations to compute reinforcement steel quantity in traditional residential buildings based on 158 sets of data collected in the West Bank in Palestine. The records related to the quantities were collected from consultancy firms that provide reinforced concrete design services. The data were collected for residential buildings up to four floors. Linear regression analysis was chosen to show the correlation between the included variables. The following variables were used in the regression models: quantity of reinforcement steel (dependent variable), structural element volume (independent variable) and floor area (independent variable). Fourteen models were developed; nine models were developed to compute the quantity of reinforcement steel in different structural elements: slabs, beams, columns and footings. The other five models were used to estimate the total steel quantity in a residential building. The coefficient of multiple determination (<italic>R</italic><sup>2</sup>) of the developed models ranged from 0.70 to 0.82. This confirms a good correlation between the dependent and the independent variables. The accuracy of the developed models was tested using the m<italic>ean absolute percentage error</italic> (MAPE) test. With MAPE values ranging from 21% to 36%, the results compare favourably with past research that indicated that accuracy between ±25% and ±50% at the early stages is acceptable. The results also show that the models built on structural element size have better accuracy than the models using floor area. Such types of equations are very useful, especially in their simplicity and ability to be handled by calculators or simple computer programmes.</p></abstract>

The objective of this study was to develop prediction mathematical equations to compute reinforcement steel quantity in traditional residential buildings based on 158 sets of data collected in the West Bank in Palestine. The records related to the quantities were collected from consultancy firms that provide reinforced concrete design services. The data were collected for residential buildings up to four floors. Linear regression analysis was chosen to show the correlation between the included variables. The following variables were used in the regression models: quantity of reinforcement steel (dependent variable), structural element volume (independent variable) and floor area (independent variable). Fourteen models were developed; nine models were developed to compute the quantity of reinforcement steel in different structural elements: slabs, beams, columns and footings. The other five models were used to estimate the total steel quantity in a residential building. The coefficient of multiple determination (R2) of the developed models ranged from 0.70 to 0.82. This confirms a good correlation between the dependent and the independent variables. The accuracy of the developed models was tested using the mean absolute percentage error (MAPE) test. With MAPE values ranging from 21% to 36%, the results compare favourably with past research that indicated that accuracy between ±25% and ±50% at the early stages is acceptable. The results also show that the models built on structural element size have better accuracy than the models using floor area. Such types of equations are very useful, especially in their simplicity and ability to be handled by calculators or simple computer programmes.

Preliminary estimate for reinforcement steel quantity in residential buildings

Civil Engineering Department, Engineering Faculty

Organization, Technology and Management in Construction: an International Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Preliminary estimate for reinforcement steel quantity in residential buildings"}

The objective of this study was to develop prediction mathematical equations to compute reinforcement steel quantity in traditional residential buildings based...

Preliminary estimate for reinforcement steel quantity in residential buildings

Article Category: Research Article

Publicado en línea: 14 mar 2017

Páginas: 1405 - 1410

Recibido: 20 abr 2016

Aceptado: 27 jul 2016

DOI: https://doi.org/10.1515/otmcj-2016-0006

Palabras clave
reinforcement steel, quantity surveying, floor area, regression models, preliminary estimate

© 2016 Ibrahim Mahamid, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Preliminary estimate for reinforcement steel quantity in residential buildings

Article Category: Research Article

Publicado en línea: 14 mar 2017

Páginas: 1405 - 1410

Recibido: 20 abr 2016

Aceptado: 27 jul 2016

DOI: https://doi.org/10.1515/otmcj-2016-0006

Palabras clavereinforcement steel, quantity surveying, floor area, regression models, preliminary estimate

© 2016 Ibrahim Mahamid, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Palabras clave
reinforcement steel, quantity surveying, floor area, regression models, preliminary estimate