<abstract xmlns="http://www.w3.org/1999/xhtml">
				
				 Porous photoanodes of dye-sensitized solar cells (DSSCs) can adsorb specific type of natural or organic dyes. Adsorption of the dye results in a change of the structural, morphological and optical characteristics of the photoanode. In this work, we present a comparative study on the adsorption effect of natural dye (Curcuma Longa sp.) on the structural, morphological and optical properties of mesoporous titanium dioxide (TiO2) photoanode on indium tin oxide (ITO) coated glass. A number of investigations including XRD, UV-Vis spectroscopy, EDS, and SEM were carried out to observe the variations due to adsorbed dye on TiO2 surface. XRD characterization revealed the effect of dye adsorption on specific surface area (SSA), crystallite size, and morphological index (MI). In this case, increasing SSA with decreasing particle size was found for both dye adsorbed and dye free DSSC photoanode samples. Also, the MI and SSA were found to be directly and inversely proportional to the crystallite size respectively. UV-Vis-NIR spectroscopy showed that dye adsorption changes the light absorption, transmittance, and optical bandgap of the photoanode. Average atomic mass percentage of titanium (Ti) and oxygen (O) obtained from EDS analysis proved the presence of TiO2 in the mesoporous photoanode. In SEM images, significant morphological changes of mesoporous TiO2 surface appeared because of dye adsorption.
			</abstract>

Porous photoanodes of dye-sensitized solar cells (DSSCs) can adsorb specific type of natural or organic dyes. Adsorption of the dye results in a change of the structural, morphological and optical characteristics of the photoanode. In this work, we present a comparative study on the adsorption effect of natural dye (Curcuma Longa sp.) on the structural, morphological and optical properties of mesoporous titanium dioxide (TiO2) photoanode on indium tin oxide (ITO) coated glass. A number of investigations including XRD, UV-Vis spectroscopy, EDS, and SEM were carried out to observe the variations due to adsorbed dye on TiO2 surface. XRD characterization revealed the effect of dye adsorption on specific surface area (SSA), crystallite size, and morphological index (MI). In this case, increasing SSA with decreasing particle size was found for both dye adsorbed and dye free DSSC photoanode samples. Also, the MI and SSA were found to be directly and inversely proportional to the crystallite size respectively. UV-Vis-NIR spectroscopy showed that dye adsorption changes the light absorption, transmittance, and optical bandgap of the photoanode. Average atomic mass percentage of titanium (Ti) and oxygen (O) obtained from EDS analysis proved the presence of TiO2 in the mesoporous photoanode. In SEM images, significant morphological changes of mesoporous TiO2 surface appeared because of dye adsorption.

Influence of natural dye adsorption on the structural, morphological and optical properties of TiO2 based photoanode of dye-sensitized solar cell

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of natural dye adsorption on the structural, morphological and optical properties of TiO based photoanode of dye-sensitized solar cell

Porous photoanodes of dye-sensitized solar cells (DSSCs) can adsorb specific type of natural or organic dyes. Adsorption of the dye results in a change of the...

Influence of natural dye adsorption on the structural, morphological and optical properties of TiO₂ based photoanode of dye-sensitized solar cell

Publicado en línea: 18 may 2018

Páginas: 93 - 101

Recibido: 28 may 2017

Aceptado: 06 oct 2017

DOI: https://doi.org/10.1515/msp-2017-0090

Palabras clave
natural dye, XRD analysis, TiO2 photoanode surface morphology, UV-Vis-NIR, optical bandgap

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of natural dye adsorption on the structural, morphological and optical properties of TiO2 based photoanode of dye-sensitized solar cell

Publicado en línea: 18 may 2018

Páginas: 93 - 101

Recibido: 28 may 2017

Aceptado: 06 oct 2017

DOI: https://doi.org/10.1515/msp-2017-0090

Palabras clavenatural dye, XRD analysis, TiO2 photoanode surface morphology, UV-Vis-NIR, optical bandgap

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of natural dye adsorption on the structural, morphological and optical properties of TiO₂ based photoanode of dye-sensitized solar cell

Palabras clave
natural dye, XRD analysis, TiO2 photoanode surface morphology, UV-Vis-NIR, optical bandgap