<abstract xmlns="http://www.w3.org/1999/xhtml">Organometal halide perovskites are promising materials for lowcost, high-efficiency solar cells. The method of perovskite layer deposition and the interfacial layers play an important role in determining the efficiency of perovskite solar cells (PSCs). In the paper, we demonstrate inverted planar perovskite solar cells where perovskite layers are deposited by two-step modified interdiffusion and one-step methods. We also demonstrate how PSC parameters change by doping of charge transport layers (CTL). We used dimethylsupoxide (DMSO) as dopant for the hole transport layer (PEDOT:PSS) but for the electron transport layer [6,6]-phenyl C61 butyric acid methyl ester (PCBM)) we used N,N-dimethyl-N-octadecyl(3-aminopropyl)trimethoxysilyl chloride (DMOAP).The highest main PSC parameters (<italic>PCE, EQE, VOC</italic>) were obtained for cells prepared by the one-step method with fast crystallization and doped CTLs but higher fill factor (<italic>FF</italic>) and shunt resistance (<italic>Rsh</italic>) values were obtained for cells prepared by the two-step method with undoped CTLs.</abstract>

Organometal halide perovskites are promising materials for lowcost, high-efficiency solar cells. The method of perovskite layer deposition and the interfacial layers play an important role in determining the efficiency of perovskite solar cells (PSCs). In the paper, we demonstrate inverted planar perovskite solar cells where perovskite layers are deposited by two-step modified interdiffusion and one-step methods. We also demonstrate how PSC parameters change by doping of charge transport layers (CTL). We used dimethylsupoxide (DMSO) as dopant for the hole transport layer (PEDOT:PSS) but for the electron transport layer [6,6]-phenyl C61 butyric acid methyl ester (PCBM)) we used N,N-dimethyl-N-octadecyl(3-aminopropyl)trimethoxysilyl chloride (DMOAP).The highest main PSC parameters (PCE, EQE, VOC) were obtained for cells prepared by the one-step method with fast crystallization and doped CTLs but higher fill factor (FF) and shunt resistance (Rsh) values were obtained for cells prepared by the two-step method with undoped CTLs.

Influence of the Preparation Method on Planar Perovskite CH3NH3PbI3-xClx Solar Cell Performance and Hysteresis

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Influence of the Preparation Method on Planar Perovskite CHNHPbICl Solar Cell Performance and Hysteresis

Organometal halide perovskites are promising materials for lowcost, high-efficiency solar cells. The method of perovskite layer deposition and the interfacial...

Influence of the Preparation Method on Planar Perovskite CH₃NH₃PbI_3-xCl_x Solar Cell Performance and Hysteresis

Publicado en línea: 23 sept 2017

Páginas: 58 - 68

DOI: https://doi.org/10.1515/lpts-2017-0027

Palabras clave
inverted structure, mixed halide cells, perovskite solar cells, planar heterojunction

© 2017 A. Ivanova et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Influence of the Preparation Method on Planar Perovskite CH3NH3PbI3-xClx Solar Cell Performance and Hysteresis

Publicado en línea: 23 sept 2017

Páginas: 58 - 68

DOI: https://doi.org/10.1515/lpts-2017-0027

Palabras claveinverted structure, mixed halide cells, perovskite solar cells, planar heterojunction

© 2017 A. Ivanova et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Influence of the Preparation Method on Planar Perovskite CH₃NH₃PbI_3-xCl_x Solar Cell Performance and Hysteresis

Palabras clave
inverted structure, mixed halide cells, perovskite solar cells, planar heterojunction