<abstract xmlns="http://www.w3.org/1999/xhtml">He+ ion implantation at 4.0 MeV, equivalent to energy of α particles from natural radioactive nuclei 238U and 232Th, has been conducted for undoped synthetic zircon. The cathodoluminescence (CL) of implanted samples was measured to clarify the radiation-induced effects. Unimplanted synthetic zircon shows pronounced and multiple blue emission bands between 310 nm and 380 nm, whereas the implanted samples have an intense yellow band at ~550 nm. The blue emission bands can be assigned to intrinsic defect centers formed during crystal growth. The yellow band should be derived from induced-defect centers by He+ ion implantation, which might be related to the metamicitization originated from a self-induced radiation in natural zircon. The yellow band may be separated into two emission components at 1.96 eV and 2.16 eV. The emission component at 2.16 eV is recognized in both unimplanted and implanted samples, and its intensity increases with an increase in the implantation dose. The CL of zircon can be used as the geodosimeter.</abstract>

He+ ion implantation at 4.0 MeV, equivalent to energy of α particles from natural radioactive nuclei 238U and 232Th, has been conducted for undoped synthetic zircon. The cathodoluminescence (CL) of implanted samples was measured to clarify the radiation-induced effects. Unimplanted synthetic zircon shows pronounced and multiple blue emission bands between 310 nm and 380 nm, whereas the implanted samples have an intense yellow band at ~550 nm. The blue emission bands can be assigned to intrinsic defect centers formed during crystal growth. The yellow band should be derived from induced-defect centers by He+ ion implantation, which might be related to the metamicitization originated from a self-induced radiation in natural zircon. The yellow band may be separated into two emission components at 1.96 eV and 2.16 eV. The emission component at 2.16 eV is recognized in both unimplanted and implanted samples, and its intensity increases with an increase in the implantation dose. The CL of zircon can be used as the geodosimeter.

Cathodoluminescence of synthetic zircon implanted by He+ ion

Department of Biosphere-Geosphere Science

Department of Earth and Planetary Material Sciences

Geochronometria

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cathodoluminescence of synthetic zircon implanted by He ion

He+ ion implantation at 4.0 MeV, equivalent to energy of α particles from natural radioactive nuclei 238U and 232Th, has been conducted for undoped synthetic...

Cathodoluminescence of synthetic zircon implanted by He⁺ ion

Publicado en línea: 01 jun 2017

Páginas: 129 - 135

Recibido: 14 mar 2016

Aceptado: 20 ene 2017

DOI: https://doi.org/10.1515/geochr-2015-0054

Palabras clave
cathodoluminescence, zircon, He ion implantation, radiation damage, metamict

© 2016 Y. Tsuchiya.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cathodoluminescence of synthetic zircon implanted by He+ ion

Publicado en línea: 01 jun 2017

Páginas: 129 - 135

Recibido: 14 mar 2016

Aceptado: 20 ene 2017

DOI: https://doi.org/10.1515/geochr-2015-0054

Palabras clavecathodoluminescence, zircon, He ion implantation, radiation damage, metamict

© 2016 Y. Tsuchiya.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cathodoluminescence of synthetic zircon implanted by He⁺ ion

Palabras clave
cathodoluminescence, zircon, He ion implantation, radiation damage, metamict