<abstract xmlns="http://www.w3.org/1999/xhtml">
				
				<p> Regional authorities require detailed and georeferenced information on the status of forests to ensure a sustainable forest management. One of the objectives in the FP7 project EUFODOS was the development of an operational service based on airborne laser scanning and satellite data in order to derive forest parameters relevant for the management of protective forests in the Alps. The estimated parameters are forest type, stem number, height of upper layer, mean height and timber volume. RapidEye imagery was used to derive coniferous and broadleaf forest classes using a logistic regression-based method. After the generation of a normalised Digital Surface Model and a forest mask, the forest area was segmented into homogeneous polygons, tree tops were detected, and various forest parameters are calculated. The accuracy of such an assessment was comparable with some previous studies, and the R-square between the estimated and measured values was 0.69 for tree top detection, 0.82 for upper height and 0.84 for mean height. For the calculation of timber volume, the R² for modelling is 0.82, for validation with an independent set of field plots, the R² is 0.71. The results have been successfully integrated into the regional forestry GIS and are used in forest management.</p>
			</abstract>

Regional authorities require detailed and georeferenced information on the status of forests to ensure a sustainable forest management. One of the objectives in the FP7 project EUFODOS was the development of an operational service based on airborne laser scanning and satellite data in order to derive forest parameters relevant for the management of protective forests in the Alps. The estimated parameters are forest type, stem number, height of upper layer, mean height and timber volume. RapidEye imagery was used to derive coniferous and broadleaf forest classes using a logistic regression-based method. After the generation of a normalised Digital Surface Model and a forest mask, the forest area was segmented into homogeneous polygons, tree tops were detected, and various forest parameters are calculated. The accuracy of such an assessment was comparable with some previous studies, and the R-square between the estimated and measured values was 0.69 for tree top detection, 0.82 for upper height and 0.84 for mean height. For the calculation of timber volume, the R² for modelling is 0.82, for validation with an independent set of field plots, the R² is 0.71. The results have been successfully integrated into the regional forestry GIS and are used in forest management.

The assessment of forest parameters by combined LiDAR and satellite data over Alpine regions – EUFODOS Implementation in Austria / Hodnotenie parametrov lesa kombináciou LIDAR-u a satelitných údajov v alpských regiónoch – implementácia systému EUFODOS v Rakúsku

Joanneum Research Forschungsgesellschaft mbH, Leonhardstraße 59, A–8010 Graz, Austria

Graz University of Technology, Rechbauerstr. 12, A–8010 Graz, Austria

European Forest Institute – Central-East European Regional Office c/o University of Natural Resources and Life Sciences, Feistmantelstr. 4, A–1180 Vienna, Austria

Central European Forestry Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Regional authorities require detailed and georeferenced information on the status of forests to ensure a sustainable forest management. One of the objectives...

The assessment of forest parameters by combined LiDAR and satellite data over Alpine regions – EUFODOS Implementation in Austria / Hodnotenie parametrov lesa kombináciou LIDAR-u a satelitných údajov v alpských regiónoch – implementácia systému EUFODOS v Rakúsku

Publicado en línea: 05 may 2015

Páginas: 3 - 11

DOI: https://doi.org/10.1515/forj-2015-0008

Palabras clave
LiDAR, satellite data, forest parameters, protective forests, Alpine environment

© by Stefanie Linser

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The assessment of forest parameters by combined LiDAR and satellite data over Alpine regions – EUFODOS Implementation in Austria / Hodnotenie parametrov lesa kombináciou LIDAR-u a satelitných údajov v alpských regiónoch – implementácia systému EUFODOS v Rakúsku

Publicado en línea: 05 may 2015

Páginas: 3 - 11

DOI: https://doi.org/10.1515/forj-2015-0008

Palabras claveLiDAR, satellite data, forest parameters, protective forests, Alpine environment

© by Stefanie Linser

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
LiDAR, satellite data, forest parameters, protective forests, Alpine environment