[ALABADAN, B. – MUSA, J. J. – ENEMAKU, L. E. 2012. Studies on Lime Treated Termite Mound Soil as a Low Cost and Energy Efficient Alternative Building Material. In Nig. J. Soil & Env. Res, vol. 10, pp. 96–100.]Search in Google Scholar
[ASTM C1006-07. Standard Test Method for Splitting Tensile Strength of Masonry Units. 2007.]Search in Google Scholar
[ASTM D570 – 98(2010) e1. Standard Test Method for Water Absorption of Plastics.]Search in Google Scholar
[ASTM D1037 – 12. Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials.]Search in Google Scholar
[ASTM D4318 – 10: 2014. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.]Search in Google Scholar
[BS 1881-120:1983. Testing concrete. Method for determination of the compressive strength of concrete cores.]Search in Google Scholar
[CHEE-MING, CH. 2011. Effect of natural fibres inclusion in clay bricks: physico-mechanical properties. In International Journal of Civil and Environmental Engineering, vol. 2011, 3, pp.1.]Search in Google Scholar
[DHEMBARE, A. J. 2013. Physico-chemical properties of termite mound soil. In Archives of Applied Science Research, vol. 5, 2013, no. 6, pp. 123–126.]Search in Google Scholar
[EN 1992-1-1 2004. Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings.]Search in Google Scholar
[FERNANDES, F. M. – LOURENÇO, P. B. – CASTRO, F. 2009. Ancient Clay Bricks: Manufacture and Properties. Published by Springer Science.10.1007/978-90-481-2684-2_3]Search in Google Scholar
[GALÁN-MARÍN C – RIVERA-GÓMEZ C. – PETRIC J. 2010. Clay-based composite stabilized with natural polymer and fibre. In Construction and Building Materials, vol. 24, pp. 1462–1468.10.1016/j.conbuildmat.2010.01.008]Search in Google Scholar
[HAACH, V. G. – VASCONCELOS, G. – LOURENÇO, P. B. 2013. Development Of A New Test For Determination of Tensile Strength of Concrete Blocks. In 12th Canadian Masonry Symposium Vancouver, British Columbia.]Search in Google Scholar
[HARPER, D. 2011. Alternative methods of stabilization for unfired mud bricks. In Engineers without Borders. Retrieved from: http://www.ewb-uk.org/filestore/20110514-Mud%20brick%20construction.pdf.]Search in Google Scholar
[HEAVY, G. N. – PARK, E. 2015. Physical properties of unfired and compressed same clay brick composites reinforced with natural fibre from Tanzania. In Int. J. Inn. Res. Adv. Eng, vol. 2, 2015, pp. 4.]Search in Google Scholar
[ISO 3310-1:2000. Test sieves – Technical requirements and testing – Part 1: Test sieves of metal wire cloth.]Search in Google Scholar
[KAYALI, O. 2005. High performance bricks from fly ash. In World of Coal Ash (WOCA), Lexington, USA.]Search in Google Scholar
[KESHUN, L. 2009. Some factors affecting sieving performance and efficiency. In Powder Technology, vol. 193, 2009, pp. 208–213.]Search in Google Scholar
[MIJINYAWA, Y. – OMOBOWALE, M. O. 2013. Determination of some physical and mechanical properties of termite mound clay relevant to silo construction. In International Journal of Materials Engineering, vol. 3, 2013, no. 5, pp. 103–107.]Search in Google Scholar
[MIJINYAWA, Y – LUCAS, E. B. – ADEGUNLOYE, F. O. 2007. Termite mound clay as material for grain silo construction. In Agricultural Engineering International: the CIGR Ejournal. Manuscript BC 07 002, vol. 9, 2007.]Search in Google Scholar
[OBRADOVIC, V. – BRNCIC, M. – JEŽEK, D. 2009. Influence of the sieving amplitude on the particle size distribution of corn flour for direct expanded extrudates manufacturing. In Agriculturae Conspectus Scientificus, vol. 74, 2009, no. 3, pp. 249–252.]Search in Google Scholar
[OLUSOLA, K. O. – OLANIPEKUN, E. A. – ATA, O. – OLATEJU, O. T. 2006. Studies on termite hill and lime as partial replacement for cement in plastering. In Building and Environment, vol. 41, 2006, pp. 302–306.]Search in Google Scholar
[OMONIYI, T. E – AKINYEMI, B. A. – OLUSOJI, A. O. 2013. Development of bamboo – rice husk ash and cement mixture for livestock house roofing sheets. In American J. Sci. and Ind. Res, vol. 4, 2013, no. 2, pp. 201–209.]Search in Google Scholar
[OMONIYI, T. E. – AKINYEMI, B. A. 2012. Durability based suitability of bagassecement composite for roofing sheets. In Journal of Civil Engineering and Construction Technology, vol. 3, 2012, no. 11, pp. 280–290.]Search in Google Scholar
[PRACTICAL ACTION. 2008. Technical Brief on Additives to clay. The Schumacher Centre for Technology & Development.]Search in Google Scholar
[SARCINELLI, T. S. et al. 2009. Chemical, physical and micromorphological properties of termite mounds and adjacent soils along a toposequence. In Zona da Mata, Minas Gerais State, Brazil. Catena 76, 2009, pp. 107–113.]Search in Google Scholar
[SAXENA, M. – ASOKAN, P. – ANUSHA, S. – RUHI, H. – SONAL, W. 2011. Composite Materials from Natural Resources: Recent Trends and Future Potentials, Advances in Composite Materials Analysis of Natural and Man-Made Materials. In Tech Publication, 2011.]Search in Google Scholar
[YALLEY, P. P. – KWAN, A. S. K. 2009. Use of coconut fibre as an enhancement of concrete. In Journal of Engineering and Technology, vol. 3, 2009, pp. 54–73.]Search in Google Scholar