<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The article presents the results of research on the effect of extrusion tube geometry on the axial force being the key parameter of the dry ice piston extrusion process. The tests were carried out with the experimental set-up based on a cylindrical extrusion tube used alone and supplemented with reducer (orifice). The focus of the experiments was to determine the effect of compression tube reducer on the value of the force of resistance FOP in the dry ice compression process. Its value can subsequently be used as the basis for establishing guidelines for designing and building machines for compression and pelletizing of dry ice.</p></abstract>

The article presents the results of research on the effect of extrusion tube geometry on the axial force being the key parameter of the dry ice piston extrusion process. The tests were carried out with the experimental set-up based on a cylindrical extrusion tube used alone and supplemented with reducer (orifice). The focus of the experiments was to determine the effect of compression tube reducer on the value of the force of resistance FOP in the dry ice compression process. Its value can subsequently be used as the basis for establishing guidelines for designing and building machines for compression and pelletizing of dry ice.

Dry Ice Compaction in Piston Extrusion Process

Chair of Basics of Machine Design, Faculty of Machines and Transport

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Dry Ice Compaction in Piston Extrusion Process"}

The article presents the results of research on the effect of extrusion tube geometry on the axial force being the key parameter of the dry ice piston...

Dry Ice Compaction in Piston Extrusion Process

Publicado en línea: 30 dic 2017

Páginas: 313 - 316

Recibido: 06 jun 2017

Aceptado: 08 dic 2017

DOI: https://doi.org/10.1515/ama-2017-0048

Palabras clave
Dry Ice, Carbon Dioxide, Compaction, Agglomeration Process, Extrusion Tube Reducer

© 2017 Jan Górecki et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Dry Ice Compaction in Piston Extrusion Process

Publicado en línea: 30 dic 2017

Páginas: 313 - 316

Recibido: 06 jun 2017

Aceptado: 08 dic 2017

DOI: https://doi.org/10.1515/ama-2017-0048

Palabras claveDry Ice, Carbon Dioxide, Compaction, Agglomeration Process, Extrusion Tube Reducer

© 2017 Jan Górecki et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Palabras clave
Dry Ice, Carbon Dioxide, Compaction, Agglomeration Process, Extrusion Tube Reducer