<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Paper presents a report of a research work that concerns possibilities of freight wagons modernization using new composite materials. The main aim of presented work was to verify the possibility of inference from the dynamic response of the wagon about the changes in its technical condition. During the presented works tests on real objects were carried out using Macro Fiber Composite (MFC) piezoelectric transducers glued to the freight wagon’s frame. The dynamical response of the wagon was measured while the object was driving. On the next stage the measured signal was generated on a laboratory stand using electrodynamic modal shaker and vibrations of the laboratory model were measured. Measured signals were juxtaposed on charts and analysed. The aim of this work was to verify if it is possible to detect the change in the system using measurements of vibrations that are being generated during exploitation of the freight wagon.</p></abstract>

Paper presents a report of a research work that concerns possibilities of freight wagons modernization using new composite materials. The main aim of presented work was to verify the possibility of inference from the dynamic response of the wagon about the changes in its technical condition. During the presented works tests on real objects were carried out using Macro Fiber Composite (MFC) piezoelectric transducers glued to the freight wagon’s frame. The dynamical response of the wagon was measured while the object was driving. On the next stage the measured signal was generated on a laboratory stand using electrodynamic modal shaker and vibrations of the laboratory model were measured. Measured signals were juxtaposed on charts and analysed. The aim of this work was to verify if it is possible to detect the change in the system using measurements of vibrations that are being generated during exploitation of the freight wagon.

Structural Tests of Freight Wagons on the Basis of Signals Generated By Piezoelectric Macro Fiber Composites

Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Paper presents a report of a research work that concerns possibilities of freight wagons modernization using new composite materials. The main aim of presented...

Structural Tests of Freight Wagons on the Basis of Signals Generated By Piezoelectric Macro Fiber Composites

Publicado en línea: 07 oct 2017

Páginas: 210 - 216

Recibido: 10 oct 2016

Aceptado: 19 sept 2017

DOI: https://doi.org/10.1515/ama-2017-0032

Palabras clave
Dynamic Response, Freight Wagon, Piezoelectric Transducers, Smart Materials, Analysis of Vibration

© 2017 Marek Płaczek et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Structural Tests of Freight Wagons on the Basis of Signals Generated By Piezoelectric Macro Fiber Composites

Publicado en línea: 07 oct 2017

Páginas: 210 - 216

Recibido: 10 oct 2016

Aceptado: 19 sept 2017

DOI: https://doi.org/10.1515/ama-2017-0032

Palabras claveDynamic Response, Freight Wagon, Piezoelectric Transducers, Smart Materials, Analysis of Vibration

© 2017 Marek Płaczek et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Palabras clave
Dynamic Response, Freight Wagon, Piezoelectric Transducers, Smart Materials, Analysis of Vibration