<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This article presents a way of calibration of an unconventional two-current circuit, named 2J+2R, which consists of two current sources and two referential resistors connected to the circuit mass. This bridge was used to measure the beam deflection and the temperature increase simultaneously with the use of a pair of metal strain gauges. This paper contains theoretical and corrected (after calibration) processing characteristics of the measurement circuit. Calibration coefficients of both inputs, responsible for measurement of the measured values in the places where the strain gauges are attached, were calculated. Moreover, the standard combined and expanded uncertainties of both calibration coefficients were calculated and an uncertainty budget was made.</p></abstract>

This article presents a way of calibration of an unconventional two-current circuit, named 2J+2R, which consists of two current sources and two referential resistors connected to the circuit mass. This bridge was used to measure the beam deflection and the temperature increase simultaneously with the use of a pair of metal strain gauges. This paper contains theoretical and corrected (after calibration) processing characteristics of the measurement circuit. Calibration coefficients of both inputs, responsible for measurement of the measured values in the places where the strain gauges are attached, were calculated. Moreover, the standard combined and expanded uncertainties of both calibration coefficients were calculated and an uncertainty budget was made.

The Calibration Process and Metrological Analysis of a Transducer Used to Measure Two Physical Quantities

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This article presents a way of calibration of an unconventional two-current circuit, named 2J+2R, which consists of two current sources and two referential...

The Calibration Process and Metrological Analysis of a Transducer Used to Measure Two Physical Quantities

Publicado en línea: 15 jun 2017

Páginas: 135 - 142

Recibido: 10 oct 2016

Aceptado: 19 may 2017

DOI: https://doi.org/10.1515/ama-2017-0021

Palabras clave
Measurement Systems, Calibration, Measurement Uncertainty, Strain Gauges, Temperature

© 2017 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Calibration Process and Metrological Analysis of a Transducer Used to Measure Two Physical Quantities

Publicado en línea: 15 jun 2017

Páginas: 135 - 142

Recibido: 10 oct 2016

Aceptado: 19 may 2017

DOI: https://doi.org/10.1515/ama-2017-0021

Palabras claveMeasurement Systems, Calibration, Measurement Uncertainty, Strain Gauges, Temperature

© 2017 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Measurement Systems, Calibration, Measurement Uncertainty, Strain Gauges, Temperature