Measurement Approach of Mean Heat Transfer Coefficient for Packed Bed of Vegetables

1. Achenbach E. (1995), Heat and flow characteristics of packed beds, Experimental Thermal and Fluid Science, 10, 17-27.10.1016/0894-1777(94)00077-LSearch in Google Scholar

2. Alvarez G., Bournet P.-E., Flick D. (2003). Two-dimensional simulation of turbulent flow and transfer through stacked spheres, International Journal of Heat and Mass Transfer, 46, 2459-2469.10.1016/S0017-9310(02)00546-XSearch in Google Scholar

3. Alvarez G., Flick D. (1999a), On heterogeneous cooling of agricultural products inside bins. Part I: aerodynamic study, Journal of Food Engineering, 39, 227-23710.1016/S0260-8774(98)00164-2Search in Google Scholar

4. Alvarez G., Flick D. (1999b). On heterogeneous cooling of agricultural products inside bins. Part II: thermal study, Journal of Food Engineering, 39, 239-245,10.1016/S0260-8774(98)00166-6Search in Google Scholar

5. ANSYS FLUENT 14.5 Theory Guide, 2012.Search in Google Scholar

6. Anzelius A. (1926), On heating of bodies by flowing media, Zeitschrift für Angewandte Mathematik und Mechanik, 6(4), 291–294 (in German).10.1002/zamm.19260060404Search in Google Scholar

7. ASHRAE Handbook – Refrigeration (2010), chapter 19, page 19.1-19.31.Search in Google Scholar

8. Becker B. R., Fricke B. A. (2004), Heat transfer coefficients for forced-air cooling and freezing of selected foods, International Journal of Refrigeration, 27, 540-551.10.1016/j.ijrefrig.2004.02.006Search in Google Scholar

9. Ben Amara S., Laguerre O., Flick D. (2004). Experimental study of convective heat transfer during cooling with low air velocity in a stack of objects, International Journal of Thermal Science, 43, 1213-1221.10.1016/j.ijthermalsci.2004.04.004Search in Google Scholar

10. Butrymowicz D., Karwacki J., Kwidziński R., Śmierciew K., Gagan J., Przybyliński T., Skiepko T., Łapin M., (2016), Methodology of heat transfer and flow resistance measurement for matrices of rotating regenerative heat exchangers, Chemical and Process Engineering, 37 (3), 341-358.10.1515/cpe-2016-0028Search in Google Scholar

11. Cai Z.H., Li M.L., Wu Y.W., Ren H.S. (1984), A modified selected point matching technique for testing compact packed bed surfaces, International Journal of Heat and Mass Transfer, 27(7), 971-978.10.1016/0017-9310(84)90113-3Search in Google Scholar

12. Chang Z.-Ch., Hung M.-Sh., Ding P.-P., Chen P.-H. (1999), Experimental evaluation of thermal performance of Gifford–McMahon regenerator using an improved single-blow model with radial conduction, International Journal of Heat and Mass Transfer, 42, 405-413.10.1016/S0017-9310(98)00186-0Search in Google Scholar

13. Chen P.-H., Chang Z.-Ch. (1996), An improved model for the single-blow measurement including the non-adiabatic side wall effect, International Communications in Heat and Mass Transfer, 23(1), 55-68.10.1016/0735-1933(95)00084-4Search in Google Scholar

14. Chen P.-H., Chang Z.-Ch. (1997), Measurements of thermal performance of cryocooler regenerators using an improved single-blow method, International Journal of Heat and Mass Transfer, 40(10), 2341-2349.10.1016/S0017-9310(96)00300-6Search in Google Scholar

15. Defraeye T., Blocken B., Derome D., Nicolai B., Carmeliet J. (2012), Convective heat and mass transfer modelling at air-porous material interfaces: Overview of existing methods and relevance. Chemical Engineering Science, 74, 49-58.10.1016/j.ces.2012.02.032Search in Google Scholar

16. Gnielinski E. (1978), Equations for calculation of heat and mass transfer in flow-through static ball beds with medium and large Peclet number, Verfahrenstechnik, 12(6), 63-366, (in German).Search in Google Scholar

17. Howard C.P. (1964), The single blow problem including the effects of longitudinal conduction, ASME Paper No. 64-GTP-11, presented at Gas Turbine Conference and Product Show, Houston TX, USA.10.1115/64-GTP-11Search in Google Scholar

18. Kays W.M., London A.L. (1997), Compact packed beds, McGraw-Hill.Search in Google Scholar

19. Kondjoyan A. (2006), A review on surface heat and mass transfer coefficients during air chilling and storage of food products, International Journal of Refrigeration, 29, 863-875.10.1016/j.ijrefrig.2006.02.005Search in Google Scholar

20. Krishnakumar K., John A.K., Venkatarathnam G. (2011), A review on transient test techniques for obtaining heat transfer design data of compact heat exchanger surfaces, Experimental Thermal and Fluid Science, 35, 738–743.10.1016/j.expthermflusci.2010.12.006Search in Google Scholar

21. Laguerre O., Ben Amara S., Alvarez G., Flick D., (2008), Transient heat transfer by free convection in a packed bed of spheres: Comparison between two modelling approaches and experimental results, Applied Thermal Engineering, 28, 14-2410.1016/j.applthermaleng.2007.03.014Search in Google Scholar

22. Laguerre O., Ben Amara S., Flick D., (2006), Heat transfer between wall and packed bed crossed by low velocity airflow, Applied Thermal Engineering, 26, 1951-196010.1016/j.applthermaleng.2006.01.011Search in Google Scholar

23. Liang C.Y., Yang. W.-J. (1975), Modified single-blow technique for performance evaluation on heat transfer surfaces, Transactions of the ASME Series C, Journal of Heat Transfer, 97, 16-21.10.1115/1.3450280Search in Google Scholar

24. Locke G.L. (1950), Heat transfer and flow friction characteristics of porous solids, Technical Report No. 10, Department of Mechanical Engineering, Stanford University, Stanford CA, USA.Search in Google Scholar

25. Luo X., Roetzel W., Lüdersen U. (2001), The single-blow transient testing technique considering longitudinal core conduction and fluid dispersion, International Journal of Heat and Mass Transfer, 44, 121-129.10.1016/S0017-9310(00)00089-2Search in Google Scholar

26. Pucci P.F., Howard C.P., Piersall C.H. Jr. (1967), The single-blow transient testing technique for compact packed bed surfaces, Trans. ASME, Journal of Engineering for Power, 89, 29-40.10.1115/1.3616604Search in Google Scholar

27. Ranganayakulu C., Luo X., Kabelac S. (2017), The single-blow transient testing technique for offset and wavy fins of compact plate-fin heat exchangers, Applied Thermal Engineering, 111, 1588–1595.10.1016/j.applthermaleng.2016.05.118Search in Google Scholar

28. Schumann T.E.W. (1929). Heat transfer: a liquid flowing through porous prism, J. Franklin Inst., 208(3), 405-416.10.1016/S0016-0032(29)91186-8Search in Google Scholar

29. Shaji K., Das S.K. (2010), The effect of flow maldistribution on the evaluation of axial dispersion and thermal performance during the single-blow testing of plate heat exchangers, International Journal of Heat and Mass Transfer, 53, 1591–1602.10.1016/j.ijheatmasstransfer.2009.10.048Search in Google Scholar

30. Verboven P., Datta A.K., Anh N.T., Scheerlinck N., Nikolai B.M. (2003), Computation of airflow effects on heat and mass transfer in a microwave oven, Journal of Food Engineering, 59, 181-190.10.1016/S0260-8774(02)00456-9Search in Google Scholar