<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In this paper selected aspects of numerical modelling of bending pipes process are described. Elasto-plastic material model was used in COMSOL FEM environment. The results of numerical analyses of two kinds of steel were presented. The correctness of the proposed model was verified based on comparison shapes of deformed pipe profile obtained at the ending step of bending both from numerical simulations and experiment.</p></abstract>

In this paper selected aspects of numerical modelling of bending pipes process are described. Elasto-plastic material model was used in COMSOL FEM environment. The results of numerical analyses of two kinds of steel were presented. The correctness of the proposed model was verified based on comparison shapes of deformed pipe profile obtained at the ending step of bending both from numerical simulations and experiment.

Verification of Ram-Press Pipe Bending Process using Elasto-Plastic FEM Model

Faculty of Mechanical Engineering, Bialystok University of Technology, 45C Wiejska Street, 15-351 Bialystok,

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Verification of Ram-Press Pipe Bending Process using Elasto-Plastic FEM Model"}

In this paper selected aspects of numerical modelling of bending pipes process are described. Elasto-plastic material model was used in COMSOL FEM environment....

Verification of Ram-Press Pipe Bending Process using Elasto-Plastic FEM Model

Publicado en línea: 04 abr 2017

Páginas: 47 - 52

Recibido: 06 feb 2016

Aceptado: 06 mar 2017

DOI: https://doi.org/10.1515/ama-2017-0007

Palabras clave
Pipe Bending, FEM Analysis

© 2017 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Verification of Ram-Press Pipe Bending Process using Elasto-Plastic FEM Model

Publicado en línea: 04 abr 2017

Páginas: 47 - 52

Recibido: 06 feb 2016

Aceptado: 06 mar 2017

DOI: https://doi.org/10.1515/ama-2017-0007

Palabras clavePipe Bending, FEM Analysis

© 2017 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Pipe Bending, FEM Analysis