<abstract xmlns="http://www.w3.org/1999/xhtml">The paper presents an analysis of the state of stress and crack tip opening displacement (strain) in specimens with rectangular cross-section subjected to torsion and combined bending with torsion. The specimens were made of the EN AW-2017A aluminium alloy. The specimens had an external unilateral notch, which was 2 mm deep and its radius was 22.5 mm. The tests were performed at constant moment amplitude <italic>MT</italic> = <italic>MBT</italic> = 15.84 N·m and under stress ratio <italic>R</italic> = −1. The exemplary results of numerical computations being obtained by using the FRANC3D software were shown in the form of stress and crack tip opening displacement (CTOD) maps. The paper presents the differences of fatigue cracks growth under torsion and bending with torsion being derived by using the FRANC3D software.</abstract>

The paper presents an analysis of the state of stress and crack tip opening displacement (strain) in specimens with rectangular cross-section subjected to torsion and combined bending with torsion. The specimens were made of the EN AW-2017A aluminium alloy. The specimens had an external unilateral notch, which was 2 mm deep and its radius was 22.5 mm. The tests were performed at constant moment amplitude MT = MBT = 15.84 N·m and under stress ratio R = −1. The exemplary results of numerical computations being obtained by using the FRANC3D software were shown in the form of stress and crack tip opening displacement (CTOD) maps. The paper presents the differences of fatigue cracks growth under torsion and bending with torsion being derived by using the FRANC3D software.

Numerical Analysis of Stress and Strain in Specimens with Rectangular Cross-Section Subjected to Torsion and Bending with Torsion

Faculty of Mechanical Engineering, Department of Mechanics and Machine Design, Opole University of Technology, ul. Mikołajczyka 5, 45-271 Opole, Poland

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents an analysis of the state of stress and crack tip opening displacement (strain) in specimens with rectangular cross-section subjected to...

Numerical Analysis of Stress and Strain in Specimens with Rectangular Cross-Section Subjected to Torsion and Bending with Torsion

Publicado en línea: 07 mar 2016

Páginas: 5 - 11

Recibido: 04 may 2015

Aceptado: 22 dic 2015

DOI: https://doi.org/10.1515/ama-2016-0001

Palabras clave
Numerical Method, Fatigue Crack Growth, Torsion and Bending with Torsion

© 2016 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Numerical Analysis of Stress and Strain in Specimens with Rectangular Cross-Section Subjected to Torsion and Bending with Torsion

Publicado en línea: 07 mar 2016

Páginas: 5 - 11

Recibido: 04 may 2015

Aceptado: 22 dic 2015

DOI: https://doi.org/10.1515/ama-2016-0001

Palabras claveNumerical Method, Fatigue Crack Growth, Torsion and Bending with Torsion

© 2016 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Numerical Method, Fatigue Crack Growth, Torsion and Bending with Torsion